NETGEAR ARLO PRO Manuel utilisateur
Arlo Pro Rechargeable Battery
Quick Start Guide
32
Insert the Battery
1. Unlock the battery compartment
by pressing and holding the latch.
2. Gently pull the battery door back
to open the compartment.
What’s Included
Rechargeable
battery
Window decal
Camera power
adapter cable Camera power adapter
54
3. Align the battery contacts.
4. Insert the battery.
5. Close the battery door.
Charge the Battery
1. Place the camera indoors.
If you are using the camera outside, bring it
inside while charging the battery.
2. Connect the power adapter cable to the
camera power adapter.
76
Note: You must use an Arlo Pro power adapter
and cable to charge the battery.
3. Connect the other end of the adapter cable
to the camera.
4. Plug the power adapter into an electrical
outlet.
The camera LED lights solid blue when the
camera battery is fully charged.
You’re Done!
Congratulations! Your Arlo Pro camera is set up and
ready to go.
To view useful tutorial videos, find troubleshooting
tips, or get support, visit support.arlo.com.
©NETGEAR, Inc., NETGEAR, the NETGEAR Logo, and Arlo are
trademarks of NETGEAR, Inc. Any non‑NETGEAR trademarks are
used for reference purposes only.
Compliance
For the current EU Declaration of Conformity, visit
http://kb.netgear.com/app/answers/detail/a_id/11621/.
For regulatory compliance information, visit
http://www.netgear.com/about/regulatory/.
350 East Plumeria Drive
San Jose, CA 95134, USA
October 2016
NETGEAR INTL LTD
Building 3, University Technology Centre
Curraheen Road, Cork, Ireland
Autres manuels pour ARLO PRO
3
Table des matières
Autres manuels NETGEAR Accessoires pour appareils photo
