NetComm NF1901ACV Manuel utilisateur
PlayStation Setup Guide
NF1901ACV FAQs
NF1901ACV FAQs – PlayStation Setup Guide
1 of 7
FQ01121 v. 1.1 March 2019
© NetComm Wireless 2019
PlayStation Setup Overview
There are two ways of allowing your PlayStation to communicate with the internet. One is through port forwarding
and the other is through the DMZ feature.
Port forwarding will enable specified ports on the NL1901ACV to get access to your PlayStation to communicate
with the internet as if they were directly connected by allowing access through.
Setting your PlayStation as a DMZ host opens all the ports on the NL1901ACV to allow access to a designated
device.
This guide has been revised to include the latest changes and updates from the NL1901ACV's new NC2 web user
interface.
Prerequisite
Before you configure the NL1901ACV, you will need to set a static IP address on your PlayStation.
Please follow the instructions at the link below to set a static IP address on your PlayStation:
https://portforward.com/networking/staticip-ps3-playstation-3.htm
You can use an IP address like 192.168.20.100 for example.
Important information
You can only forward a port to
one
location (IP address).
In some cases, this may cause issues when multiple LAN devices (computers, game consoles, or VOIP ATAs) attempt to use
online gaming as same time or make multiple VOIP service connections.
In these cases, you would need to use an alternate port for any subsequent connections after the first device.
Please consult your VOIP provider or game manufacturer for assistance with this.
NF1901ACV FAQs – PlayStation Setup Guide
2 of 7
FQ01121 v. 1.1 March 2019
© NetComm Wireless 2019
Setting the PlayStation as the DMZ Host
Log in to the web interface
Connect a computer and the NF18ACV using an Ethernet cable. (A yellow Ethernet cable was provided with your
NL1901ACV).
1Open a web browser (such as Google Chrome or Mozilla Firefox), type following address into the address
bar and press Enter.
http://192.168.20.1
2Enter the following credentials in the User Name and Password fields:
User Name: admin
Password: The serial number found on the label on the back of the device
3Click the OK/Log In button.
Note
– If no authentication prompt is displayed or you see a request time out message, refer to the What if I cannot access Web User
Interface guide from FAQs section.
1Select the Click on the Advanced Setup menu at the left of the page, then click on NAT options and then
click on DMZ Host options:
NF1901ACV FAQs – PlayStation Setup Guide
3 of 7
FQ01121 v. 1.1 March 2019
© NetComm Wireless 2019
2Enter the static IP address of the PlayStation in the DMZ Host IP Address field. In this example, 192.168.20.100 is the
IP address of the PlayStation.
3Click on the Save/Apply button
4Reboot the modem: Click Management menu on the left-hand side of the page then click Reboot options:
5Click the Reboot button.
NF1901ACV FAQs – PlayStation Setup Guide
4 of 7
FQ01121 v. 1.1 March 2019
© NetComm Wireless 2019
Add a Port Forwarding Rule for PlayStation
Log in to the web interface
4Open a web browser (such as Google Chrome or Mozilla Firefox), type following address into the address
bar and press Enter.
http://192.168.20.1
5Enter the following credentials in the User Name and Password fields:
User Name: admin
Password: The serial number found on the label on the back of the device
6Click the OK/Log In button.
6Port 80 is also used to access webpage of the NL1901ACV so it needs to be re-configured.
It is recommended to change the webpage port number to 8000 as described below (Remember that from
now onwards you can only access the webpage with port 8000).
7Click the Save/Apply button.
NF1901ACV FAQs – PlayStation Setup Guide
5 of 7
FQ01121 v. 1.1 March 2019
© NetComm Wireless 2019
8Open a web browser (such as Internet Explorer, Google Chrome or Firefox), type http://192.168.20.1:8000
into the address bar and press enter.
9Click on the Advanced Setup at the left of the page, then click on NAT option and then click Virtual Servers
options.
10 Click the Add button to add a new port forwarding rule.
11 Check that the interface currently selected in the Use Interface field is correct.
12 Choose the Use Interface from the drop-down menu as either ADSL / VDSL / or ETH WAN depending on
your connection type for internet.
13 To create your own defined port forwarding rule, select the Custom Service field and give the port forwarding
rule a unique name.
This example uses Gaming Console.
NF1901ACV FAQs – PlayStation Setup Guide
6 of 7
FQ01121 v. 1.1 March 2019
© NetComm Wireless 2019
14 Enter the IP address of the PlayStation that you wish to port forward to in the Server IP Address field.
In this example, the IP address of the PlayStation is 192.168.20.100
15 Enter the port number or port range into the External Port Start and External Port End fields.
Note that the Internal Port Start and Internal Port End fields will automatically populate with the same port
numbers.
16 Select the Protocol to be used for the port forwarding rule. Options include TCP, UDP or TCP/UDP for both.
Ports and protocols
The ports and protocols for PlayStation are as follows:
PlayStation 3 ports:
http://manuals.playstation.net/document/en/ps3/current/settings/connecttest.html
PROTOCOL
PORT NUMBER
TCP 80
TCP 443
TCP and UDP 3478
TCP and UDP 3479
TCP 3480
TCP 5223
TCP 8080
UDP 3658
PlayStation 4 ports:
https://portforward.com/networking/static-ip-ps4/default.htm
PROTOCOL
PORT NUMBER
TCP 80
TCP 443
TCP and UDP 3478
TCP and UDP 3479
TCP 3480
TCP 1935
NF1901ACV FAQs – PlayStation Setup Guide
7 of 7
FQ01121 v. 1.1 March 2019
© NetComm Wireless 2019
17 Click the Apply/Save button.
18 The port forwarding rules will now be displayed as the example above shows.
19 You must now reboot the modem. Select the Management menu on the left-hand side of the page then
click its Reboot option.
20 And then click the Reboot button.
Important information
You can only forward a port to
one
location (IP address).
In some cases, this may cause issues when multiple LAN devices (computers, game consoles, or VOIP ATAs) attempt to use
online gaming as same time or make multiple VOIP service connections.
In these cases, you would need to use an alternate port for any subsequent connections after the first device.
Please consult your VOIP provider or game manufacturer for assistance with this.
Table des matières
Autres manuels NetComm Routeur sans fil
NetComm
NetComm N3G001W Manuel utilisateur
NetComm
NetComm NetComm Gateway Series Guide de démarrage rapide
NetComm
NetComm NF12 Manuel utilisateur
NetComm
NetComm Liberty 3G17Wn Manuel utilisateur
NetComm
NetComm NP644 Manuel utilisateur
NetComm
NetComm NB604N Manuel utilisateur
NetComm
NetComm NB16WV Manuel utilisateur
NetComm
NetComm NB9WMAXX Manuel utilisateur
NetComm
NetComm NB304N Manuel utilisateur
NetComm
NetComm NB8W Manuel utilisateur
NetComm
NetComm 3G21WE Manuel utilisateur
NetComm
NetComm 3G38WV Manuel utilisateur
NetComm
NetComm NTC-140W Series Manuel utilisateur
NetComm
NetComm NB604N Manuel utilisateur
NetComm
NetComm NB14WN Manuel utilisateur
NetComm
NetComm NF5 Manuel utilisateur
NetComm
NetComm N300 GATEWAY SERIES Manuel utilisateur
NetComm
NetComm Dynalink 3G8WV Manuel utilisateur
NetComm
NetComm NetComm Gateway Series Manuel utilisateur
NetComm
NetComm Vodafone MachineLink 3G Manuel utilisateur
