NetComm Wireles NF7 Mode d’emploi
N300 WiFi Gigabit Router
NF7
Firmware Release Notes
2
NF7 Firmware Release Notes
www.netcommwireless.com
Copyright
Copyright© 2014 NetComm Wireless Limited. All rights reserved.
The information contained herein is proprietary to NetComm Wireless. No part of this document may be translated, transcribed,
reproduced, in any form, or by any means without prior written consent of NetComm Wireless.
Note: This document is subject to change without notice.
DOCUMENT VERSION
DATE
1.0 - Initial document release
03/10/2014
www.netcommwireless.com
NF7 Firmware Release Notes
3
Release information
ITEM
DETAILS
Product Code
NF7
NetComm Product Description
N300 WiFi Gigabit Router
Firmware Version
NCNU0.1006_09161637
Beta/Official
Official Release
File Name
2014.09.16_NetComm_NF7_NCNU0.1006_09161637.bin
MD5 Checksum
2f15dc393dfcd9320a5c1ddc1ea42419
Date
3 October 2014
Warning: The router will reset to default settings after the firmware upgrade has completed in order for the router to function
correctly.
Upgrade instructions
1. Connect the power adapter to the Power socket on the back of the NF7.
2. Plug the power adapter into the wall socket and switch on the power. Wait approximately 60 seconds for the NF7 to
power up.
3. Connect the yellow Ethernet cable provided to one of the ports marked ‘LAN’ at the back of the NF7.
4. Connect the other end of the yellow Ethernet cable to your computer.
5. Wait approximately 30 seconds for the connection to establish.
6. Open your Web browser, and enter http://192.168.20.1 into the address bar and press enter.
7. At the login screen, type admin in the Username and Password field and click the Login button.
8. From the top menu bar, select Toolbox and then Firmware Upgrade.
9. Press the Browse button and load the firmware file (2014.09.16_NetComm_NF7_NCNU0.1006_09161637.bin).
10. Click Upgrade to proceed. The router performs the upgrade and then reboots itself.
11. When the upgrade is done, the NF7 will reset to factory default settings automatically and then the login page is displayed.
At the login screen, type admin in the Username and Password field and click the Login button.
12. From the top menu bar, select Toolbox and then Firmware Upgrade. Confirm that the current firmware version is
NCNU0.1006_09161637
4
NF7 Firmware Release Notes
www.netcommwireless.com
NCNU0.1006_09161637
New features
None
Bug fixes
Fixed DNS queries response from WAN side issue
Fixed IPV6 DualStack issue
Known issues
None.
NCNU0.1004_10281915–Initial production release
New features
None.
Bug fixes
None.
Known issues
None.
Table des matières
Autres manuels NetComm Wireles Routeur réseau
Manuels Routeur réseau populaires d'autres marques
NETGEAR
NETGEAR FS526T - Switch Manuel utilisateur
Korenix
Korenix JetNet 5710G Series Manuel utilisateur
Automated Logic
Automated Logic ZN551 Manuel du propriétaire
Cisco
Cisco ASR 1000 Series Manuel de l'opérateur
EnGenius
EnGenius ESR-9710 Manuel utilisateur
Cisco
Cisco 805 Series Instructions d'utilisation et de sécurité