NetApp FAS9000 Manuel

Pre-setup 1. Unpack all boxes and inventory contents.

Attention: Customers with speciﬁc power requirements must check Hardware Universe for their conﬁguration options.

2. Watch the Setup Videos.

3. Review the NetApp ONTAP Conﬁguration Guide.

Prepare for installation Install hardware Cable storage Complete system setup

and conﬁguration

1 2 3 4

FAS9000 Systems

Installation and Setup Instructions

Screwdriver

Phillips #2

Laptop or console

With a USB/serial connection and

access to a Web browser to conﬁgure

your storage system

Rack space

8U per chassis

Prepare for installation |1

You provide

In the box

Controller-to-controller cablesHost cables

10 GbE network cable

Part number 112-00299,

112-00300, or 112-00301

40 GbE network cable

Part number 112-00543

Optical network cable

Part number 112-00188,

112-00189, or 112-00090

Storage cables

MiniSAS HD cable

Part number 112-00436,

112-00437, or 112-00438

40 GbE cluster interconnect cable

Part number 112-00542 or 112-00543

Ethernet cables

Additional network cables

For connecting your storage

to your network switch and client

Power cables

USB console cable

Part number 112-00508

215-15154_2020-12_en-us

Slide rail kit

Cable management device

Note: For more cable information and

part numbers, see the Hardware Universe.

Install hardware |2

• Unpack all boxes and inventory contents.

• Install rail kits, as needed, using the rail kit

installation instructions.

• Install the empty chassis into the system cabinet or rack.

• Reinstall the system components into the chassis,

matching the chassis slot ID with the slot ID

sticker on the component.

• Attach cable management device.

• Place the bezel on the front of the system.

Unpack and install the system.

Cable controller to switches (choose option A or B below)

See your network administrator for help connecting to your switch.

DO NOT power on controllers

at this point.

Handles and cable

management device

240 lbs. (109 kg)

Fully-populated chassis

A10

A11

B10

B11

6-2

6-1

6-2

6-1

2To management

network switches

To data

network

switches

To data

network

switches

90 lbs. (41 kg)

Empty chassis

A10

A11

B10

B11

6-2

6-1

6-2

6-1

2To management

network switches

To data

network

switches

To data

network

switches

To cluster switches

Switchless cluster: Cable cluster

interconnect ports A together in slot

A4 and B4 (e4a) and again in slot

A8 and B8 (e8a).

Switched cluster: Connect ports a

in slot A4, B4, A8 and B8 (e4a, e8a)

to the cluster switch. Use the cables

supported by your switch.

Connect the wrench ports

to the management switches.

Connect the e4b and e8b ports

to the data switches.

Connect the e2a, e2c, e10a and

e10c ports to the data switches.

Strap the cables to the cable

management arms (not shown).

Connect the power cables to the

PSUs and connect them to dierent

power sources.

Cluster interconnect cable

10 GbE network cable

Ethernet cable

Power cable

Switchless cluster

Switched cluster

Controller A

PSU 1

Controller B

PSU 2 PSU 3 PSU 4

Controller A

PSU 1

Controller B

PSU 2 PSU 3 PSU 4

PSU 1 and PSU 3

provide power to

all side A FRUs,

PSU 2 and PSU 4

provide power to

all side B FRUs.

PSU 1 PSU 2 PSU 3 PSU 4

2nd

power

source

1st

power

source

40 GbE network cable

Cable storage |3

321 Connect the shelf-to-shelf ports Connect the controllers to Stack 1 Connect the controllers to Stack 2

Cabling a FAS9000 with external storage

(DS212C or DS224C disk shelves)

Multipath HA cabling

Quad-path HA cabling

(optional)

Insert SAS cable tab UP or tab DOWN and gently push into place until it clicks.

IOM12 21

L N K L N K

IOM12 21

L N K L N K

IOM12 21

L N K L N K

IOM12 21

L N K L N K

AC AC

IOM12 21

L N K L N K

IOM12 21

L N K L N K

AC AC

A10

A11

B10

B11

6-2

6-1

6-2

6-1

Stack 1

Controller 1 Controller 2

Stack 2

First shelf

Last shelf

IOMA IOMB

Mini-SAS HD cable

(PN 112-00436, 112-00437, or 112-00438)

Complete initial cluster setup with network discovery:

Note: If your laptop does not support network discovery, see the Detailed guide.

Connect your laptop to the management switch and access the network computers and devices.

Power on the shelves and set shelf IDs:

1. Plug the power cords into the shelf power supplies, connect them to power sources on dierent circuits,

and then turn on the power switches to boot the shelves.

2. If you need to change the shelf IDs,

continue with substeps a through e;

otherwise, skip to “Power on the

controllers” below.

Repeat these steps for any

remaining drive shelves.

aOpen File Explorer

Double-click either ONTAP icon.

Note: Accept any certiﬁcates displayed on your screen.

Click network in the left pane.

Then right click and select refresh.

Laptop Management Switch

Completing setup:

1. Click...

a) mysupport.netapp.com c) Download and install Active IQ Conﬁg Advisor

b) Create/log in to your account d) Register your system

2. Verify the health of your system by running Conﬁg Advisor.

3. After you have completed the initial conﬁguration, go to the NetApp ONTAP Resources

page for information about conﬁguring additional features in ONTAP.

Use System Manager Guided Setup to conﬁgure your cluster.

Turn on the power

switches to all nodes:

PSU 1 and PSU 3 provide

power to all side A FRUs,

PSU 2 and PSU 4 provide

power to all side B FRUs.

Remove end cap

Shelf ID number

0 0

Shelf ID number

0 9

Press and hold shelf ID button until 2nd

digit blinks, then push to advance to 0-9.

Note: The ﬁrst digit stops blinking, and

the second digit continues to blink.

Wait 10 seconds for the

Amber LED (!) to appear,

then power-cycle the

drive shelf to set shelf ID.

0 9

Replace end cap

Shelf ID button

Faceplate

Press and hold shelf ID button until 1st digit

blinks, then push to advance to 0-9.

Note: The first digit continues to blink.

PSU 1 PSU 2 PSU 3 PSU 4

2nd

power

source

1st

power

source

Complete system setup and conﬁguration |4

A10

A11

B10

B11

6-2

6-1

6-2

6-1

PSU 1 PSU 2 PSU 3 PSU 4

Table des matières

Autres manuels NetApp Stockage

NetApp

NetApp AFF A700s Manuel utilisateur

NetApp

NetApp E-Series 3040 40U Manuel utilisateur

NetApp

NetApp FAS9500 Feuille d'instructions

NetApp

NetApp NearStore R100 Manuel utilisateur

NetApp

NetApp E Series Manuel utilisateur

NetApp

NetApp StorageGRID Webscale SG5700 Series Manuel d'utilisation

NetApp

NetApp SG100 Feuille d'instructions

NetApp

NetApp EF550 Manuel utilisateur

NetApp

NetApp AFF A400 Manuel utilisateur

NetApp

NetApp H600S Series Manuel

NetApp

NetApp AFF A300 Manuel utilisateur

NetApp

NetApp AFF A250 Manuel utilisateur

NetApp

NetApp DE5600 Manuel utilisateur

NetApp

NetApp DS4243 Instructions d'installation et d'entretien

NetApp

NetApp DE6900 Manuel utilisateur

NetApp

NetApp AFF A320 Manuel utilisateur

NetApp

NetApp DS2246 Manuel

NetApp

NetApp FAS2500 Manuel d'utilisation et d'entretien

NetApp

NetApp StorageGRID Webscale SG6000 Series Manuel d'utilisation

NetApp

NetApp StorageGRID Webscale SG5700 Series Manuel d'utilisation

NetApp

NetApp FAS8300 Manuel

NetApp

NetApp FAS8300 Manuel utilisateur

NetApp

NetApp SOLIDFIRE Manuel utilisateur

NetApp

NetApp AltaVault Cloud Integrated Storage 4.1 Instructions d'installation et d'entretien

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur