Net2Edge DataBand ISU Manuel utilisateur

QSG

Quick Start Guide:

DataBand ISU

QSG | Quick Start Guide: DB-ISU

| www.net2edge.com

Trademarks

All trademarks and registered trademarks are the property of their respective owners.

No part of this work may be reproduced or used in any form or by any means (graphic,

electronic or mechanical) without written permission from Net2Edge.

The information contained herein is confidential property of Net2Edge Limited. The use,

copying, transfer or disclosure of such information is prohibited except by express

written agreement with Net2Edge Limited.

Revision History

Rev

Date

Description

2nd September 2016

Rebranded & Minor Amendments

QSG | Quick Start Guide: DB-ISU

| www.net2edge.com

Contents

Trademarks.................................................................................................. 2

Revision History........................................................................................... 2

Contents....................................................................................................... 3

1. Introduction ........................................................................................ 4

2. Applications ....................................................................................... 4

3. Getting Started ................................................................................... 5

3.1 Rack Mounting Instructions ................................................................................ 5

3.2 Standard Accessories .......................................................................................... 6

3.3 Optional Accessories ........................................................................................... 6

3.4 Making Connections ............................................................................................ 6

3.5 Installing DbManager ........................................................................................... 7

4. Initial Configuration / Setup .............................................................. 8

4.1 Connecting to DataBand ISU .............................................................................. 8

4.2 Notes on configuring DataBand ISU................................................................... 9

4.3 Device Settings ................................................................................................... 10

4.4 PRI Ports ............................................................................................................. 10

4.5 ISDN Numbers .................................................................................................... 10

4.6 BRI Ports ............................................................................................................. 11

4.7 Imux Ports ........................................................................................................... 11

4.8 Front Panel .......................................................................................................... 12

4.9 Finishing Configuration...................................................................................... 12

4.10 Additional Resources ......................................................................................... 13

5. Safety Warnings ............................................................................... 13

6. Contacts............................................................................................ 14

QSG | Quick Start Guide: DB-ISU

| www.net2edge.com

1. Introduction

This document is a basic guide for configuring a new Net2Edge DataBand ISU. A full

User Manual for configuring all settings on the unit is supplied on the DbManager

Installation Disk.

2. Applications

Net2Edge DataBand CSI and ISU devices are central-site and remote-site ISDN inverse

multiplexers, I-MUXes, Terminal Adaptors or ISDN aggregators. Used in a wide variety

of applications, but commonly for videoconferencing and with encryptors such as KIVs

or for backup purposes.

QSG | Quick Start Guide: DB-ISU

| www.net2edge.com

3. Getting Started

This section will describe how to make the physical connections between DataBand ISU

and the other system devices, and install the Net2Edge management application,

DbManager.

3.1 Rack Mounting Instructions

The Rack Mounting Kit comprises the following:

Picture

Description

Quantity

L-Bracket

Long Net2Edge case screw

Cage nut

Washer

Rack Mount screw

All Net2Edge products can be mounted in a standard 19" rack housing. To allow

products to be installed into a 19" rack, a Rack Mounting Kit must be purchased for the

product (s). There are a number of rack mounting options depending on the size of the

product ordered. The following guide will explain how to use the Rack Mounting Kit with

Net2Edge products:

1. Remove the four short screws near the front or rear panel on the left and right

hand sides of the DataBand ISU. The unit can be mounted with the front panel

facing forward or with the ports facing forward as required.

2. Fit one of the L-Brackets to the side of the unit. The four small fixing holes allow

the unit to protrude forward or sit further back depending on the desired position

QSG | Quick Start Guide: DB-ISU

| www.net2edge.com

of the unit. The bracket may also face forwards or backwards depending on the

desired position of the unit.

3. Fix the L-Bracket in place using the Long Net2Edge case screws.

4. Fix the second L-Bracket to the other side of the case in the same way.

5. Put the Rack Mount screws through the Rack Mount washers.

6. Offer the unit up to the rack and fix it in place using the Rack Mount Screws and

Rack Mount cage nuts.

3.2 Standard Accessories

The following accessories are supplied with the DataBand ISU:

Item

Description

DbManager CD

Installable DbManager application, technical documents and

manuals

Controller Cable

Management cable. Connects to the

DataBand ISU’s Terminal port

Cable Spec

RJ12

DB9S

Function

Gnd

IEC Mains Cable

Connects DataBand ISU to the mains supply

3.3 Optional Accessories

The following items can be ordered separately:

ISDN Cables

Cables to connect the DataBand ISU to a CPE or network.

Please see the full manual for specifications of all Net2Edge

cables

Rack Mounting Kit

Enables the DataBand ISU to be mounted in a standard 19"

rack

3.4 Making Connections

First, connect the ISDN cables to DataBand ISU followed by the Terminal Port

management cable (if required).

If the unit has a DC power supply connection, use the screw terminals to connect the

DC power source.

QSG | Quick Start Guide: DB-ISU

| www.net2edge.com

Warning: The -48VDC power terminals are marked 0V, -48V, and GND.

Net2Edge -48VDC products are designed for use with negative voltage DC

supplies, and therefore expect the positive voltage to be connected to the 0V

terminal, and the negative connected to -48V. Please be sure about the polarity

of this connection before connecting power to the terminals. Units which have a

positive +24VDC power source will be marked +24VDC, 0V and GND

respectively. Please ensure that the positive connection is made on the +24VDC

terminal.

3.5 Installing DbManager

DbManager is required in order to monitor and manage the DataBand ISU. Management

can be made using the Terminal (serial) port, or using TCP/IP over a LAN or WAN.

DbManager is installed using the CD provided with product or can be downloaded from

the Net2Edge Website: www.net2edge.com

1. Insert the DbManager Installation Disk into the drive of the PC which will be used

for management of DataBand ISU.

2. InstallShield Wizard will start up. Follow the steps to install DbManager.

3. Serial Number – Enter the Serial Number on the case of the DbManager Disk.

N.B.: DbManager is supplied as a 'Lite' version by default. This allows configuration

and monitoring of devices, but only allows configuration of a single device node and

a single user account. To use DbManager in 'Lite' mode, do not enter a serial

number during installation. Please see the full DbManager User Manual for more

information on configuring and using DbManager.

Warning: If an older version of DbManager is already installed on the management

PC, it is necessary to update to the version supplied on the new DbManager CD.

This can be done by consulting the ‘Upgrade’ folder on the DbManager CD. The

‘readme.txt’ file explains how to upgrade to the new DbManager without reinstalling

the program.

QSG | Quick Start Guide: DB-ISU

| www.net2edge.com

4. Initial Configuration / Setup

Follow these steps to connect to DataBand ISU with DbManager and configure the unit

for use.

Configuration of DataBand ISU is carried out by setting up DbManager to make a

management connection, and then setting up the elements of DataBand ISU in this

order:

Terminal / LAN Port

The unit-specific settings of the DataBand ISU such

as the IP Address and Identifier

ISDN Ports

Each ISDN port can be individually configured with

the correct settings to interface with another device

or network. Here the bonding number for

conferences can also be stored

IMUX Ports

The Serial ports can be used to configure and

initiate calls. The Control Lead status of ports can

also be checked from here

4.1 Connecting to DataBand ISU

1. Start up the DbManager Application

2. Login as Super User (no password required)

3. Four windows will be displayed:

Map

A network map showing Nodes

and Links between Net2Edge

devices

Terminal

A view of the communications

between DbManager and

DataBand ISU

Event History

All events which occur while

connected to DataBand ISU

Outstanding Events

Current Events

4. Select View Properties Terminal from the DbManager toolbar.

QSG | Quick Start Guide: DB-ISU

| www.net2edge.com

5. 192.168.0.1 should already be configured. If using another IP address, add it

to the list using the Add button.

6. Click OK OK

7. Select the Devices in World window and double click the Device node

8. The Connected to Device window should appear, showing the front and rear

panels of DataBand ISU.

Info: TCP/IP management requires TCP port 3001 (dec) to be open between

the management PC and DataBand ISU. Any switches, hubs or routers must

be configured to allow communication on this port in order to manage

DataBand ISU via TCP/ IP

A successful management connection will open up the Connected to Device window:

4.2 Notes on configuring DataBand ISU

Uploading

Changes to the configuration can be made on each window and saved using the OK

key when exiting each window. When happy with the configuration, it must be uploaded

to the DataBand ISU for the new settings to come into effect.

To upload, go to File Upload and wait until the progress bar completes.

Saving Files

Configuration files can be saved in order to backup settings or copy settings across to

another unit. Once the configuration has been uploaded, go to File Save File and

choose a location where you wish to save the file. The file extension of any saved config

files is .dbc

Loading Files

Once connected to a unit, an existing configuration file can be loaded to the device. Go

to File Open File and navigate to the saved file. Click Open. Now the file must be

uploaded to DataBand ISU: Go to File Upload and wait until the progress bar

completes.

Warning: When loading existing configuration files to a unit, please ensure that

the correct configuration files are used for the unit type in use. DataBand ISU

configuration files are not compatible with other Net2Edge products.

QSG | Quick Start Guide: DB-ISU

| www.net2edge.com

4.3 Device Settings

This menu controls unit-specific features of the DataBand ISU such as the IP Address,

Identifier, Serial Number, Configuration Number, Time & Date and Event Reporting.

These features are all fully explained in the DataBand ISU User Manual on the

DbManager Installation Disk.

4.4 PRI Ports

There are two LEDs for each PRI port, and the LED states are as follows:

Top LED on:

Layer 1 and 2 established

Top LED flashing:

Layer 1 established, trying to synchronize with Layer 2

Bottom LED on:

Calls active on interface

1. Click on an enabled PRI port.

2. The configuration settings for the port are displayed.

3. Configure the settings as required for the port.

4. Click OK to save the settings.

Note: The PRI port can be switched to NT mode (if the switchable PRI option is

taken). The setting must then be uploaded, DataBand ISU must be rebooted and

a crossover cable must be used in order to use the port in NT mode.

4.5 ISDN Numbers

The ISDN Numbers window can be used to define the Bonding Numbers which

DataBand ISU sends back to calling devices in order to set up conferences at speeds of

up to 1024kbps. The Bonding Numbers should be the DDI or MSN numbers of the local

ISDN line supplied by the carrier.

1. Click on the ISDN Numbers button on any ISDN port to access the number list.

2. Right-click in the empty window and select New to add a list of ISDN Numbers

3. Enter a number up to 24 digits long and click Save + Exit.

4. Extra options such as editing and deleting can be accessed by right-clicking

existing entries.

Note: If calls are to be received from international callers, please add the country

prefix e.g. 001 for USA. Numbers should be entered in digit form without any

special characters (*#+)

Table des matières

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur