Neptronic EFCB Manuel utilisateur

EFCB Thermostat

Specification & Installation Instructions

TFL(H)5x-180322.doc/111031 1

Technical Data

TFL54

TFLH54-xxx

Electrical connection

3 wire cable

Setpoint range

10ºC to 40ºC [50ºF to 104ºF]

Temperature: 10ºC to 40ºC [50ºF to 104ºF]

Humidity: 10 to 65%RH

Control accuracy

Temperature: ±0.5ºC [0.9ºF] @ 22ºC [71.6ºF]

typical calibrated

Temperature: ±0.5ºC [0.9ºF] @ 22ºC [71.6ºF]

typical calibrated, Humidity ±3.5%

Power supply

From EFCB

Power consumption

1 VA

Display resolution

±0.1ºC [0.2ºF]

Proportional band

0.5ºC to 5ºC [1ºF to 10ºF] adjustable

Operating temperature

0ºC to 50ºC [32ºF to 122ºF]

Storage temperature

-30ºC to 50ºC [-22ºF to 122ºF]

Relative humidity

5 to 95 % non condensing

Housing degree of protection

IP 30 (EN 60529)

Weight

80 g. [0.15 lb]

Note

The TFL(H)5x can only work with the EFC. All the inputs/outputs are located on the EFC except

for the temperature sensor built-in the TFL(H)5x.

Interface

Display Symbols

Cooling ON

100% output

A: Automatic

Menu set-up lock

Energy saving mode

Heating ON

100% output

A: Automatic

Programming mode

(Technician setting)

ºC: Celsius scale

ºF: Fahrenheit scale

Fan ON

100% output

A: Automatic

Alarm status

Minimum/Maximum

setpoints

Dimensions

Dimension

Imperial (in)

Metric (mm)

3.00

1.00

2.36

Features:

Used to program/configure the EFCB Fan Coil controller

Attractive modern look with large LCD and backlight

Icon-driven information and 1 line of text information

3 wire cable between thermostat and EFCB controller

Selectable Fahrenheit or Celsius scale

Multi-level lockable access menu

Selectable internal or external temperature sensor

TFL54

TFLH54-xxx

TFL(H)5x

Specification & Installation Instructions

Mounting Instructions

BA C D E

CAUTION: Risk of malfunction. Remove power prior to separate thermostat cover (control module) from its base.

A. Remove the screw (captive) holding the base and the front cover of the thermostat.

B. Lift the front cover of the thermostat to separate it from the base.

C. Pull the cable through the base hole.

D. Secure the base to the wall using wall anchors and screws (supplied). Make the appropriate connections.

E. Mount the control module on the base and secure using the screw (from step A).

Settings on PC Board & Connections

Mode Selection (JP1)

PGM

RUN

JP1

Jumper (JP1) on RUN:

Thermostat is in Operation Mode.

Thermostat must be set in this mode to operate properly.

If not locked, setpoint, fan speed and control mode (Heating &

Cooling ON, Cooling only ON or Heating only ON) can be

modified by end user.

PGM

RUN

JP1

Jumper (JP1) on PGM:

Thermostat is set in Programming Mode.

Refer to following section about all settings description

TFL54 –3 wire cable (TB5 #1, 2 & 3)

Connect TB6 #4 (A+) & #5 (B-) to EFCB for BACnet service port to work

TFL55 –RJ45 Ethernet cable

BACnet service port works only if TFL(H)5x is connected to EVCB

JP1

Mode selector COM

PGM

Connecting

strip

COMM.

BUS

24V

Temperature

sensor

RUN

TB1

BACnet

service port

1 2 3 4 5 6 7

AI1

B-

A+

DI1

JP1

Mode selector

PGM

Temperature

sensor

RUN

BACnet

service port

RJ45 connector

Recycling at end of life

At end of life, please return the thermostat to your Neptronic®local distributor for recycling. If you need to find the nearest Neptronic®

authorized distributor, please consult www.neptronic.com.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Neptronic Thermostat

Neptronic

Neptronic TRO5404 Manuel utilisateur

Neptronic

Neptronic EFC Manuel utilisateur

Neptronic

Neptronic TFCB24F3XYZ1 Manuel utilisateur

Neptronic

Neptronic TRO24T4XYZ3 Manuel utilisateur

Neptronic

Neptronic ARO24T Manuel utilisateur

Neptronic

Neptronic TFCB24F3XYZ1 Manuel utilisateur

Neptronic

Neptronic TROB24 Series Manuel utilisateur

Neptronic

Neptronic TRT2422 Manuel utilisateur

Neptronic

Neptronic PTC Manuel utilisateur

Neptronic

Neptronic TMA54-EXT1 Manuel utilisateur

Neptronic

Neptronic TRL54 Manuel de service

Neptronic

Neptronic TRO24-EXT1 Manuel utilisateur

Neptronic

Neptronic EFCB12T-OE1 Manuel utilisateur

Neptronic

Neptronic EVCBM14NIT2S Manuel utilisateur

Neptronic

Neptronic EVCB14NIT2S Manuel utilisateur

Neptronic

Neptronic TFL24 Manuel utilisateur

Neptronic

Neptronic TFHB24F3XYZ1 Manuel utilisateur

Neptronic

Neptronic EFCB10TU2 Manuel utilisateur

Manuels Thermostat populaires d'autres marques

EWELLY

EWELLY EW-181 Manuel utilisateur

Prolon

Prolon T1100 Instructions d'installation

Computherm

Computherm Q20 Manuel utilisateur

Heatmiser

Heatmiser neoStat Manuel utilisateur

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manuel utilisateur

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manuel utilisateur

Saswell

Saswell SAS920XWHB-7-S-RF Mode d’emploi

Aircalo

Aircalo TFP1-ET85P2 Manuel utilisateur

Honeywell

Honeywell CM721 Manuel utilisateur

Carrier

Carrier DEBONAIR 33CS Manuel utilisateur

Lennox

Lennox iHarmony Zone Thermostat Instructions de montage

Gemtech

Gemtech GT7000 Mode d’emploi

Rollei

Rollei Smartes 45000 Manuel utilisateur

Sinope

Sinope TH1300RF Manuel utilisateur

Honeywell

Honeywell RLV4305 Manuel utilisateur

Honeywell

Honeywell Prestige 2.0 THX9421 Manuel utilisateur

NuTone

NuTone NTBZ48 Instructions d'utilisation d'origine

Stelpro

Stelpro MAESTRO ASMT402AD Manuel utilisateur