Nematron AEMC236-990 Manuel utilisateur

AEMC236-990

Intel®C236 Express Chipset

Industrial Computer Board

User's Manual

v1.2

Release date: 2023.6

Preface 
1 
Contents 
 
 
Copyright and Trademarks Notice.............................................3
Revision History..........................................................................3
Technical Support.......................................................................3
Safety Instructions......................................................................3
Chemical Substances Information.............................................4
Battery Information .....................................................................5
CE Conformity.............................................................................5
FCC-A Radio Frequency Interference Statement......................5
Notice 1....................................................................................................6
Notice 2....................................................................................................6
Voir La Notice D’Installation Avant De Raccorder Au Reseau............6
WEEE Statement .........................................................................6
Chapter 1 Overview.................................................................8
Mainboard Specifications ......................................................................8 
Mainboard Layout.................................................................................11
Chapter 2 Hardware Setup....................................................12
CPU (Central Processing Unit) ............................................................12
Introduction to LGA 115x CPU ......................................................................12 
CPU Installation...............................................................................................13 
Memory..................................................................................................15 
Dual-Channel Mode.........................................................................................15 
Recommended Memory Population..............................................................15 
Installing Memory Modules............................................................................15 
Power Supply........................................................................................16 
System Power Connector: PWRCONN1.......................................................16 
CPU Power Connector: JPWR2.....................................................................17 
Rear Panel I/O .......................................................................................17
Connector..............................................................................................18
Fan Power Connector: CPUFAN1, SYSFAN2~4...........................................18 
I2C Bus Connector: JSMB1............................................................................19 
GPIO Pin Header: JGPIO1..............................................................................19 
Serial ATA Connector: SATA1~5 (SATA5 for C236/ Q170 SKU)................19 
Front Panel Connector: JFP1 ........................................................................19 
USB 2.0 Connector: JUSB1, JUSB2..............................................................20 
USB 3.0 Connector: JUSB3............................................................................20 
TPM Module Connector: JTPM1....................................................................21 
Front Audio Connector: JAUD1.....................................................................21 

Preface 
2 
S/PDIF Pinheader: JSPDI1 .............................................................................22 
Parallel Port Connector: JLPT1.....................................................................22 
Serial Port Connector: JCOM1~6..................................................................22 
Jumper...................................................................................................24 
Clear CMOS Jumper: J_CMOS1....................................................................24 
AT/ATX Select Jumper: JAT1 ........................................................................24 
Chassis Intrusion Pinheader: J1...................................................................25 
Serial Port Power Jumper: JCOMP1 ~ JCOMP6..........................................25 
NVM LAN Jumper: JNVM1 .............................................................................25 
Slot.........................................................................................................25
PCIe (Peripheral Component Interconnect Express) Slot..........................25 
Mini-PCIe Slot..................................................................................................26 
PCI (Peripheral Component Interconnect) Slot...........................................26 
Chapter 3 BIOS Setup...........................................................27
Entering Setup......................................................................................27
Control Keys....................................................................................................27 
Getting Help.....................................................................................................28 
Sub-Menu.........................................................................................................28 
General Help <F1>...........................................................................................28 
The Menu Bar........................................................................................29 
Main .......................................................................................................30 
Advanced...............................................................................................31
Boot .......................................................................................................36
Security..................................................................................................37
Chipset...................................................................................................41 
Power.....................................................................................................42 
Save & Exit............................................................................................44
Appendix WDT & GPIO.........................................................45
WDT Sample Code................................................................................45
GPIO Sample Code...............................................................................46
 
 
 
 

Preface

mentioned may be trademarks of their respective owners. No warranty as to

accuracy or completeness is expressed or implied. We reserves the right to

make changes to this document without prior notice.

Revision History

Revision

Date

V1.0

2017/ 11

V1.1

2021/ 01

V1.2

2023/ 06

Technical Support

If aproblem arises with your system and no solution can be obtained from the

user’s manual, please contact your place of purchase or local distributor.

Alternatively, please try the following help resources for further guidance.

Safety Instructions

⚫Always read the safety instructions carefully.

⚫Keep this User’s Manual for future reference.

⚫Keep this equipment away from humidity.

⚫Lay this equipment on areliable flat surface before setting it up.

⚫The openings on the enclosure are for air convection hence protects the

equipment from overheating. DO NOT COVER THE OPENINGS.

Preface

⚫Make sure the voltage of the power source and adjust properly 110/220V

before connecting the equipment to the power inlet.

⚫Place the power cord such away that people can not step on it. Do not

place anything over the power cord.

⚫Always Unplug the Power Cord before inserting any add-on card or

module.

⚫All cautions and warnings on the equipment should be noted.

⚫Never pour any liquid into the opening that could damage or cause

electrical shock.

⚫If any of the following situations arises, get the equipment checked by

service personnel:

➢The power cord or plug is damaged.

➢Liquid has penetrated into the equipment.

➢The equipment has been exposed to moisture.

➢The equipment does not work well or you can not get it work

according to User’s Manual.

➢The equipment has dropped and damaged.

➢The equipment has obvious sign of breakage.

⚫DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT UNCONDI-

TIONED, STORAGE TEMPERATURE ABOVE 60℃(140℉), IT MAY

DAMAGE THE EQUIPMENT.

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace

only with the same or equivalent type recommended by the manufacturer.

警告使用者: 這是甲類資訊產品，在居住的環境中使用時，可能會造成無線電干

擾，在這種情況下，使用者會被要求採取某些適當的對策。

Chemical Substances Information

In compliance with chemical substances regulations, such as the EU REACH

Regulation (Regulation EC No. 1907/2006 of the European Parliament and

the Council), We provides the information of chemical substances in products.

Preface

Battery Information

European Union:

Batteries, battery packs, and accumulators should not be

disposed of as unsorted household waste. Please use the

public collection system to return, recycle, or treat them in

compliance with the local regulations.

废电源请回收

BSMI:

For better environmental protection, waste batteries should

be collected separately for recycling or special disposal.

California, USA:

The button cell battery may contain perchlorate material

and requires special handling when recycled or disposed of

in California.

Danger of explosion if battery is incorrectly replaced. Replace only with the

same or equivalent type recommended by the manufacturer.

CE Conformity

Hereby, Micro-Star International CO., LTD declares that this

device is in compliance with the essential safety requirements

and other relevant provisions set out in the European Directive.

FCC-A Radio Frequency Interference Statement

This equipment has been tested and found to comply with the

limits for aClass Adigital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses and can radiate

Preface

radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in aresidential area is likely to cause harmful

interference, in which case the user will be required to correct the interference

at his own expense.

Notice 1

The changes or modifications not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

Notice 2

Shielded interface cables and AC power cord, if any, must be used in order to

comply with the emission limits.

VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER

AU RESEAU.

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions:

1) this device may not cause harmful interference, and

2) this device must accept any interference received, including interference

that may cause undesired operation.

WEEE Statement

Under the European Union (“EU”) Directive on Waste Electrical

and Electronic Equipment, Directive 2002/96/EC, which takes

effect on August 13, 2005, products of “electrical and electronic

equipment” cannot be discarded as municipal waste anymore and

manufacturers of covered electronic equipment will be obligated to take back

such products at the end of their useful life. We will comply with the product

take back requirements at the end of life of branded products that are sold into

Preface

the EU. You can return these products to local collection points.

Chapter 1 Overview

Thank you for choosing the AEMC236-990, an excellent industrial computer

board. Based on the innovative Intel®C236 chipset for optimal system

efficiency, the AEMC236-990 supports Intel®7th/ 6th Gen Intel®Core™

Xeon/i7/i5/i3 Pentium®&Celeron®Processor in socket LGA1151 and

supports DDR4 2133 UDIMM slots.

In the advanced-level and mid-range market segment, AEMC236-990

provides ahigh-performance solution for today’s front-end and general

purpose workstation, as well as in the future.

Mainboard Specifications

Processor

◼C236 SKU supports 7th/6th Gen Intel®Xeon®E3-12xx V5, Core™

i7/i5/i3, Pentium, Celeron Processors in socket LGA1151.

Chipset

◼C236 SKU: Intel C236 chipset

Memory

◼C236 SKU: Intel C236 chipset

◼C236- 4 DDR4 UDIMM slots (C236 SKU supports ECC)

➢Supports the maximum of 64GB - Supports dual-channel mode

LAN

◼LAN1: Intel I219-LM Gigabit Fast Ethernet controller

◼LAN2: Intel I210-AT Gigabit Fast Ethernet controller

SATA

◼C236

➢5 SATA 6Gb/s ports (SATA1 ~ SATA5)

➢1 mSATA slot (shares slot with Mini-PCIe2)

Audio

◼Realtek ALC887 audio codec

◼3 audio jacks

Graphics

◼Within Intel®Processor. Integrated Intel®HD Graphics, supports

DirectX12.

Rear Panel I/O

Chapter 1 Overview

◼1 PS/2 Mouse/ Keyboard Combo port

◼2 Gigabit LAN jacks

◼4 USB 3.0 ports

◼2 USB 2.0 ports

◼1 DVI-D port

◼1 D-Sub port (Non PnP)

◼2 DisplayPort

◼3 flexible audio ports

Onboard Pin Headers/ Connectors/ Jumpers

◼5 SATA 6Gb/s ports;

◼1×2*10-pin 2.0-pitch box-header, each of support two USB 3.0-port

2×2*5-pin 2.54-pitch box-headers, each of support two USB 2.0-ports

◼6 Serial Port connectors (COM1/2: RS-232/422/485 with

Ring/0V/5V/12V; COM3/4/5/6: RS-232 with 0V/5V/12V)

◼6 Serial Port Power select jumpers (2×2*3-pin 2.0-pitch pin-headers,

select Ring/0V/5V/12V for COM1/2; 4×1*3-pin 2.0/2.54-pitch pin-

headers, select 0V/5V/12V for COM3/4/5/6)

◼1 TPM connector

◼1 Parallel Port connector

◼1 Front Panel connector

◼1 Front Audio connector

◼1 GPIO pin header

◼1 SMBus connector

◼1 Chassis Intrusion pin header

◼1 Clear CMOS jumper

◼1 AT/ATX Jumper

◼1 ME Jumper

◼1 LAN NVM Select Jumper

◼1 S/PDIF

◼1 CPU FAN Header

◼3 System FAN Header

Slot

◼1 PCIe x16 slot (Gen 3) - PCIe1

◼2 PCIe x4 slots - PCIe2 & PCIe3

◼2 Mini-PCIe slots

◼4 PCI slots

Form Factor

◼ATX size: 305mm×244mm

Table des matières

Autres manuels Nematron PC industriel

Nematron

Nematron ePC Series Manuel utilisateur

Manuels PC industriel populaires d'autres marques

Chipsee

Chipsee PPC-A72-101 Manuel utilisateur

Advantech

Advantech UNO-2184G Manuel utilisateur

MSI

MSI MS-9A76 Manuel utilisateur

Stackrack

Stackrack THOR200 Manuel utilisateur

Moxa Technologies

Moxa Technologies DA-682C Series Manuel utilisateur

Nodka

Nodka eBOX-3000-ETC Manuel utilisateur

Siemens

Siemens SIMATIC IPC627E Manuel utilisateur

MSI

MSI MS-9A89 Manuel utilisateur

Artila

Artila Matrix-516 Manuel utilisateur

Siemens

Siemens SIMATIC Rack PC 840 V2 Manuel utilisateur

Advantech

Advantech IPPC-6152A Manuel utilisateur

Beckhoff

Beckhoff CX9020 Manuel utilisateur

Dell

Dell Embedded Box PC 5000 Manuel utilisateur

IBASE Technology

IBASE Technology ASB200-918 Series Manuel utilisateur

Lenovo

Lenovo ThinkCentre M90q Manuel du propriétaire

IXXAT

IXXAT Econ 100 Manuel utilisateur

Kontron

Kontron KBox A-151-TGL Manuel utilisateur

AXIOMTEK

AXIOMTEK ICO500-518 Series Manuel utilisateur