NEC Dterm I Series Manuel utilisateur

The Dterm Series I

16-Button Phone Set

Speaker

Output

Exit

Feature

Conference

Redial

Answer

Transfer

Speaker

Control &

Indicator

Hold

Built-in

Microphone

LCD

24 Characters x 3 lines

Adjustable Angle Indicator Lamp

•Incoming Call

•Message Waiting

(Voice Mail) 10/100

Base T Switch

(Future Enhancement)

4 Administrative

Soft Keys

8 Programmable

Keys Flexible

Line/Feature Keys

Microphone &

Indicator Lamp

Volume Control

•Ring

•Receive

•LCD Contract

Help

Recall

Conf (Conference): Press this key to

establish a three-way conversation. The LED

on the key lights when the key is active.

Answer: When LED on this key is lit, press key to

answer call.

Hold: Press key to place a call on hold.

Feature: Used to activate terminal setup functions

and to program One-Touch Speed Dial/Feature

Keys.

Recall: Press key to terminate established call

and reseize internal dial tone.

Redial: Press key to activate Last Number Call

redial and Speed Calling.

Transfer: Allows the station user to transfer

established calls to another station, without

attendant assistance.

Speaker: Controls the built-in speaker which can be

used for Hands Free dialing/monitoring LED on key

lights when key is active.

Microphone: Press key to turn on/off the

microphone.

Up/Down: Used to adjust LCD contrast,

speaker/receiver volume, and ringer volume.

NEC Dterm Series I 16-Button Telephone QUICK REFERENCE GUIDE

(These instructions apply to all NEC Dterm Series I users)

Amarillo College Faculty and Staff

FUNCTION KEYS

TO ORIGINATE AN OUTSIDE CALL

Lift handset or press Speaker key, receive dial tone.

Dial the Central Office access code, e.g. 9.

Dial desired telephone number.

Use handset or MIC to converse.

TO ORIGINATE AN INTERNAL CALL

Lift handset or press Speaker key.

Receive dial tone.

Dial desired station number.

Display indicates digits dialed.

Use handset or MIC to converse.

TO ORIGINATE A CALL USING SPEED CALLING

(ONE-TOUCH BUTTONS)

Press desired Speed Call button, or press Speaker and Speed Call.

To program:

(Available only on D-term stations with speed calling keys.)

Press Feature button.

Press desired Speed Call button.

Enter desired telephone number or feature code on the keypad. Display indicates digits dialed.

Press Feature again to save the number.

To verify:

Press Feature button.

Press desired Speed Dial button.

Display indicates digits programmed.

NOTE 1: To program a pause, press Recall key as any digit other than the first digit ( displays on

LCD).

NOTE 2: To program a Voice Call, press Transfer key after dialing station number

(Vdisplays on LCD).

TO PLACE A CALL ON HOLD

Press Hold. Held line wink flashes.

NOTE: If held line appears on other D-term stations, the associated LED flashes red slowly.

To retrieve:

Lift handset or press Speaker.

Press held line. Use handset to converse.

NOTE: Any station with this line appearance can retrieve the call.

If unanswered

After preprogrammed time, Automatic Recall is initiated.

Visual and audible signal (rapid flash and ring burst) is sent to station that placed call on hold.

NOTE 1: A transfer or conference call may be placed on hold depending on software level of the

switch.

NOTE 2: Hold shows as a flashing green LED on your phone. The same line on other phones shows

as a flashing red LED. Recall shows as a flashing green LED on your phone and flashing red LED on

other phones with the same line.

TO TRANSFER A CALL

After conversing, ask party to hold.

Press Transfer. Receive interrupted dial tone.

Dial destination station's extension, hang up or wait for answer.

If transferring party hangs up, that station's number appears in

the center of recipient's display.

CONFERENCE

With call in progress, ask party to hold.

Press Transfer, receive interrupted dial tone.

Dial desired number.

After call is answered, press Conf. Conf LED lights.

Three-way conference is established.

If one party hangs up, other two remain connected. Conf LED goes out.

Using the Soft Key

With a call in progress, press Transfer and dial desired number.

After call is answered, press

CONF Soft Key. Three-way conference is established.

CALL PICKUP (GROUP)

When station within pickup group rings:

Lift handset.

Press CALL PICKUP or dial Call Pickup access code (may be stored on-one-touch speed calling key).

Connection to calling party is established.

If currently on a call, press Transfer and dial Call Pickup access code. The original party is placed on

hold.

Using the Soft Key

Lift handset and press PICK Soft Key.

Connection to calling party is established.

LAST NUMBER REDIAL

To recall the last number dialed:

Press Redial. Last number dialed is displayed.

Press Redial key until desired number is displayed. Up to 5 previously dialed numbers.

Press *. The number on the display is automatically redialed.

When party has answered, lift handset or speak hands free.

TO TURN THE MIC ON & OFF

Press Feature or FNC button to turn it on, the led on the button will light.

Press the 1 key, this will toggle the mic on & off.

CALL FORWARDING-ALL CALLS

To Set:

Press Speaker. Receive dial tone.

Press FWD or dial Call Forwarding access code. Receive special dial tone.

Dial destination station or external telephone number. Receive service set tone.

FWD LED lights (at your station or at the Dterm of the sub line station you are setting).

To Set Using the Soft Key

Press Speaker. Receive dial tone.

Press FDA Soft Key. Receive special tone.

Dial destination; wait for service set tone.

"FORWARD SET” is displayed; call forwarding for all calls is set.

NOTE:With Soft Key operation, FDA flashes on the display.

To verify (with 16 or 32-button D-term):

Press FWD.

Display indicates the station number calls are forwarded to.

NOTE: If recipient station is a 16- or 32-button D-term, LCD displays:

To cancel:

Press Speaker. Receive dial tone. .

Press FWD or dial Call Forwarding cancel code. Receive service

set tone. LED goes out at your station (or the D-term of the

sub line station).

Press Speaker. Call Forwarding is canceled.

To Cancel Using the Soft Key

Receive dial tone.

Press flashing FDA Soft Key.

Receive service set tone and "FORWARD CANCEL" is displayed.

CALL FORWARDING BUSY /NO ANSWER

To Set:

Press Speaker. Receive dial tone.

Press FWD-BSY. Receive special dial tone.

Dial destination station or external telephone number. Receive service set tone.

FWD LED lights (at your station or at the D-term of the sub line station you are setting).

Press Speaker. Call Forwarding Busy is set.

To Set Using the Soft Key

Press Speaker. Receive dial tone.

Press FDB Soft Key. Receive special tone.

Dial destination; wait for service set tone.

"FORWARD SET” is displayed; busy for all calls is set.

To verify (with Display Phone):

Press FWD-BY.

Display indicates the station number calls are forwarded to.

NOTE: If recipient station is a 16 or 32-button D-term, LCD displays:

To cancel:

Press Speaker. Receive dial tone.

If canceling for another station, press SUB LINE APPEARANCE.

Press FWD-BY or dial Call Forwarding Busy cancel code. Receive service set tone. LED goes out at

your station (or the Dterm of the sub line station).

Press Speaker. Call Forwarding is canceled.

To Cancel Using the Soft Key

Press flashing

FDB Soft Key.

Receive service set tone and "FORWARD CANCEL" is displayed.

Last updated 12/15 /2009

This is a publication of Information Technology Services. For further assistance please contact the

Technology Information Center (806) 371-5100, or email [email protected]

Autres manuels pour Dterm I Series

Table des matières

Autres manuels NEC Téléphone

NEC

NEC Univerge SV8100 Manuel utilisateur

NEC

NEC DT300 Series Manuel utilisateur

NEC

NEC SV8300 Manuel utilisateur

NEC

NEC Univerge SV9100 Manuel utilisateur

NEC

NEC XN120 Vision Manuel utilisateur

NEC

NEC SL1100 Manuel utilisateur

NEC

NEC Univerge SV9100 Manuel utilisateur

NEC

NEC Univerge SV8100 Mode d’emploi

NEC

NEC NVM-2000 Manuel utilisateur

NEC

NEC Univerge SV8100 Mode d’emploi

NEC

NEC DT310 Manuel utilisateur

NEC

NEC Univerge DT820 Manuel d'instructions

NEC

NEC UNIVERGE SL2100 Manuel utilisateur

NEC

NEC DT300 Series Manuel utilisateur

NEC

NEC Univerge SV8100 Manuel utilisateur

NEC

NEC DT430 Series Manuel utilisateur

NEC

NEC Univerge SV9100 Manuel utilisateur

NEC

NEC XN120 Vision Manuel utilisateur

NEC

NEC DS2000 IntraMail Manuel utilisateur

NEC

NEC Univerge SV9100 Manuel utilisateur

NEC

NEC Xen Topaz Manuel utilisateur

NEC

NEC Univerge SV9100 Manuel d'utilisation et d'entretien

NEC

NEC Univerge SV8100 Mode d'emploi

NEC

NEC DT310 Guide de référence

Manuels Téléphone populaires d'autres marques

GE 2-9480 Manuel utilisateur

Geemarc

Geemarc PHOTOPHONE 155 Manuel utilisateur

D-Link

D-Link DWR-720/PW Manuel utilisateur

Interquartz

Interquartz Gemini IQ333 Manuel utilisateur

SSS Siedle

SSS Siedle HT 840-0 Manuel utilisateur

Motorola

Motorola TITANIUM Manuel utilisateur

Panasonic

Panasonic ICX Manuel utilisateur

LG H870DS Manuel utilisateur

Samsung

Samsung GT-I9500 Manuel utilisateur

AT&T

AT&T Trimline 205 Manuel utilisateur

Selta

Selta zenyth 600 Manuel utilisateur

Doro

Doro AFTI 20 Manuel utilisateur

UNIQCELL

UNIQCELL A1 Manuel utilisateur

Panasonic

Panasonic KX Series Manuel utilisateur

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Manuel utilisateur

BT Decor 425 Manuel utilisateur

Teledex

Teledex PEARL Manuel utilisateur

Ericsson

Ericsson Dialog 3213 Manuel utilisateur