NEC NEC Express5800 Series Manuel utilisateur

SAP HANA Appliance

Express5800 A2040b

Initial Operation Verification Guide

(Revision: Nov-2014)

NEC Europe, Ltd

SAP Global Competence Center

Revision Record

25-Apr-2014

Initial Release

27-Nov-2014

Added information for external storage

Table of Contents

1. Preparation...................................................................................................................... 2

1.1. Check the Power Plugs........................................................................................... 2

1.2. Check the NICs....................................................................................................... 2

1.2.1. Production Network............................................................................................. 2

1.2.2. Management Network......................................................................................... 2

1.3. External Storage (JBOD) ........................................................................................ 3

2. Start the Server............................................................................................................... 3

2.1. Power on the server................................................................................................ 3

2.2. Logon to the server................................................................................................. 4

2.3. Start the SAP HANA Instance................................................................................. 5

3. Stop the Server............................................................................................................... 6

3.1. Stop the SAP HANA Instance................................................................................. 6

3.2. Power off the server................................................................................................ 6

1. Preparation

1.1. Check the Power Plugs

Please check that all power plugs are connected to the back of server.

1.2. Check the NICs

1.2.1. Production Network

Please check that all Network Interface Cards are connected as required. This means the

two dual port adapters mounted in slots number 8 and 9 should be connected. These 4

1GB ports are bonded by the OS driver. For your reference please see the numbers on top

of the PCI slot. The below image does not contain NICs in these slots.

1.2.2. Management Network

Please check that at least one of both management adapters (MGB1 Management and

MGB2 Management) is connected to the network. With this connection you can monitor

your hardware health.

1.3. External Storage (JBOD)

In case you have a 2TB appliance with an external storage please connect the storage to

the 2nd RAID controller.

The RAID controller is mounted in PCI slot 5. Please connect its port “A” to port “0” of the

JBOD.

Please connect two power cables to the external storage as well.

2. Start the Server

2.1. Power on the server

Pressing the SYSTEM POWER Switch at the front of the server turns on the server.

Turn on the server by using the following procedure.

Important

• Do not power on the server before amber SYSTEM POWER LED is unlit.

• Wait for at least 30 seconds before pressing the SYSTEM POWER switch on the

server after turning off the server.

1. Turn on the peripheral devices and display unit.

Note

If the power cord is connected to power control system such as an Uninterruptible Power

Supply (UPS), make sure that the power control system is turned on.

2. Remove Front Bezel, if mounted.

3. Press the SYSTEM POWER switch at the front of the server.

SYSTEM POWER LED is lit green and after a while, POST appears on the display.

Important

Do not connect or disconnect USB device while POST is running.

If you have an external storage please also power on the storage unit by pressing both dip

switches at the back side of the storage near the power units.

Wait for the server to finish the boot operation. Once it has completed you will be presented

the following login screen.

Please login to the OS.

2.2. Logon to the server

Username : root

Password : hana

2.3. Start the SAP HANA Instance

1. Change the current directory ..

# cd /usr/sap/hostctrl/exe

2. Start the SAP HANA Instance.

Check the status “OK”.

Instance No : “HANA>SAP HANA> Instance No.” on parameter sheet.

# ./sapcontrol –nr <instance no> -function Start

16.12.2013 XX:XX:XX

Start

3. Check the SAP HANA Instance Status.

Check the all status “GREEN”

It takes some time after the sapcontrol command.

Instance No : “HANA>SAP HANA> Instance No.” on parameter sheet.

# ./sapcontrol –nr <instance no> - function GetProcessList

3. Stop the Server

3.1. Stop the SAP HANA Instance

1. Change the current directory ..

# cd /usr/sap/hostctrl/exe

2. Stop the SAP HANA Instance.

Check the status “OK”.

Instance No : “HANA>SAP HANA> Instance No.” on parameter sheet.

# ./sapcontrol –nr <instance no> -function Stop

16.12.2013 XX:XX:XX

Stop

3. Check the SAP HANA Instance Status.

Check the all status “GREEN”

It takes some time after the sapcontrol command.

Instance No : “HANA>SAP HANA> Instance No.” on parameter sheet.

# ./sapcontrol –nr <instance no> - function GetProcessList

3.2. Power off the server

1. Power off the server. Use the following command on terminal.

# shutdown –h now

Autres manuels pour NEC Express5800 Series

107

Table des matières

Autres manuels NEC Serveur

NEC

NEC DX2000 Manuel d'utilisation

NEC

NEC Express5800 320La Mode d’emploi

NEC

NEC Univerge SV8100 Manuel du propriétaire

NEC

NEC Express5800/120Rj-2 Manuel utilisateur

NEC

NEC US110 Manuel utilisateur

NEC

NEC EXP801 Manuel d'utilisation

NEC

NEC NEC Express5800 Series Manuel utilisateur

NEC

NEC NEC Express5800 Series Manuel utilisateur

NEC

NEC EXP804 Manuel utilisateur

NEC

NEC EXPRESS5800/R320d-E4 Manuel utilisateur

NEC

NEC Express5800/A2040c Manuel utilisateur

NEC

NEC N8100-1909F Manuel d'utilisation

NEC

NEC ES1200 Manuel utilisateur

NEC

NEC Express5800/B120b-d Manuel utilisateur

NEC

NEC N8141-69F Manuel utilisateur

NEC

NEC NEC Express5800 Series Comment utiliser

NEC

NEC Express5800/T71f Manuel utilisateur

NEC

NEC NEAX 2000IVS2 Manuel utilisateur

NEC

NEC Express 5800/R320c-E4 Manuel utilisateur

NEC

NEC EXPRESS5800/100 SERIES N8100-1635F Manuel utilisateur

NEC

NEC Univerge SV8100 Manuel

NEC

NEC HX4500 Manuel utilisateur

NEC

NEC EXPRESS5800/120Ef Manuel utilisateur

NEC

NEC SV8500 Guide de l'utilisateur

Manuels Serveur populaires d'autres marques

HP AlphaServer ES47 Manuel utilisateur

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

HP ProLiant Gen9 Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur

Planet

Planet NAS-7410 Manuel utilisateur