NEC 120Ra-1 Manuel utilisateur

120Ra-1 Pentium III Processor

Installation Insert

PN: 455-01614-000

Proprietary Notice and Liability Disclaimer

The information disclosed in this document, including all designs and related materials, is

the valuable property of NEC Computers Inc. and/or its licensors. NEC Computers Inc.

and/or its licensors, as appropriate, reserve all patent, copyright and other proprietary rights

to this document, including all design, manufacturing, reproduction, use, and sales rights

thereto, except to the extent said rights are expressly granted to others.

The NEC Computers Inc. product(s) discussed in this document are warranted in

accordance with the terms of the Warranty Statement accompanying each product.

However, actual performance of each such product is dependent upon factors such as

system configuration, customer data, and operator control. Since implementation by

customers of each product may vary, the suitability of specific product configurations and

applications must be determined by the customer and is not warranted by NEC Computers

Inc.

To allow for design and specification improvements, the information in this document is

subject to change at any time, without notice. Reproduction of this document or portions

thereof without prior written approval of NEC Computers Inc. is prohibited.

Trademarks

Intel and Pentium III are registered trademarks of Intel Corporation.

All other product, brand, or trade names used in this publication are the trademarks or registered

trademarks of their respective trademark owners.

PN: 455-01614-000 March 2001

NEC Computers Inc.

15 Business Park Way

Sacramento, CA 95828

120Ra-1 Pentium III Processor Installation 3

Introduction

This Intel®Pentium®III Installation Insert provides information for installing

the Pentium III processor upgrade into your 120Ra-1 system. Read this

procedure in its entirety before performing the installation to become familiar

with the items in this upgrade and the sequence of steps you will perform.

Unpacking the Upgrade

When you receive your Pentium III processor upgrade, inspect the shipping

container prior to unpacking. If the shipping box is damaged, note the damage,

and if possible, photograph it for reference. After removing the contents of the

container, keep the carton and the packing materials. If the contents appear

damaged when you unpack the box, file a damage claim with the carrier

immediately.

Installing the Upgrade

CAUTION

Observe static precautions. Use an antistatic wrist strap.

Hold the processor only by its edges. Do not touch the pins

of the processor board.

CAUTION

Installing a second processor that is of a different type than

the first processor will result in system damage. Do not

touch or bend the processor's exposed pins.

Note: When adding a second processor to your system,

you must remove the terminator from the secondary

processor socket.

4 120Ra-1 Pentium III Processor Installation

Removing the Front Bezel

Refer to the Figure 1 and remove the front bezel of the server as follows:

1. Terminate all applications.

2. Open the front door of the system rack.

3. If the front server bezel is locked, unlock it.

4. Grasp the right edge of the front bezel and pull the bezel towards you to

open it.

5. Slide the front bezel left to disengage the mounting tabs and remove the

front bezel from the chassis.

6. Press the power ON/OFF button (Figure 1, A) to power down the server.

7. Remove the two screws securing the server to the front of the system rack.

WARNING

To reduce the risk of personal injury, be careful when

pressing the component rail release latches and sliding the

component in or out of the rack. The slide rails could pinch

your fingertips.

8. Pull the server out of the rack until the component rail release latches

engage. The component rail release latches on either side of the server lock

the server onto the slide rails.

Figure 1. Opening the Front Bezel

120Ra-1 Pentium III Processor Installation 5

Top Covers

The server includes front and rear top covers. To install a processor into the

system board of the server, you must remove the rear top cover.

CAUTION

For proper cooling and airflow, do not operate the system

with the top covers removed. Always replace the covers

before powering on the system.

WARNING

If you are removing the top covers after the system is set up,

you must first power off the system and all external devices

and then Unplug the system power cord

Removing the Rear Top Cover

To remove the rear top cover:

1. Loosen the captive thumbscrew securing the top cover to the rear panel.

See Figure 2. Slide the top cover towards the rear of the server chassis until

its tab fasteners unlock.

2. Lift the top cover up and away from the chassis.

Figure 2. Removing the Top Cover

6 120Ra-1 Pentium III Processor Installation

Installing a Processor

CAUTION

Observe static precautions. Use an antistatic wrist strap.

Hold the processor only by its edges.

CAUTION

Installing a second processor that is of a different type than

the first processor will result in system damage. Do not

touch or bend the processor's exposed pins.

Note: When adding a second processor to your system,

you must remove the terminator from the secondary

processor socket.

1. Raise the ZIF socket lever to the up position. See Figure 3.

Figure 3. Raising the ZIF Socket Lever

2. Remove the terminator from the secondary processor socket.

3. Position the processor over its ZIF socket so the processor pins align with

the socket holes. Note that one corner of the processor has three pins that

should be positioned over the corner of the socket that has the three

matching pin holes. See Figure 4, A.

120Ra-1 Pentium III Processor Installation 7

Figure 4. Positioning the Processor

4. Insert the processor pins into the socket. Apply pressure equally over the top

surface of the processor until it seats in the socket. The processor should

easily fit, do not force the processor into the socket.

5. Lower the ZIF socket lever into the locked position. See Figure 5.

Figure 5. Installing the Processor

8 120Ra-1 Pentium III Processor Installation

CAUTION

The thermal pad is very delicate and tears easily. Handle

with extreme care. Perform the next two steps exactly as

described to ensure proper heat transfer from the processor

to the heat sink.

6. One side of the thermal pad is shiny metallic foil. The other side of the

thermal pad is covered with a clear plastic liner. Carefully peel the liner

away from the pad. The clear liner is not used and may be discarded.

7. Position the thermal pad on top of the processor with the shiny side facing

down and the yellow sticky side of the pad facing up. Ensure the pad is

positioned over the center of the processor as shown in Figure 6.

Figure 6. Installing Thermal Pad

8. Ensure the small end of the heat sink clip is positioned into the heat sink as

far as it will go.

Note: The heat sink included with this upgrade may not

resemble the heat sink on the processor in your system.

Several types of heat sinks are used with the Pentium III

processor.

CAUTION

When performing the next three steps, be sure the heat sink

is held firmly in position. If the heat sink should slide across

the top of the processor, the thermal pad may be damaged.

120Ra-1 Pentium III Processor Installation 9

9. Attach the small end of the heat sink clip to the tab located on the base of the

ZIF socket. See Figure 7, A. Gently lower the heat sink onto the processor,

being careful not to move the heat sink from side to side.

Figure 7. Positioning the Heat Sink Clip

10 120Ra-1 Pentium III Processor Installation

10.Using a small flat blade screwdriver, press down on the heat sink clip

retention latch and hook it under the fastener tab on the base of the ZIF

socket, as shown in Figure 8, A. The heat sink clip is now secured to the

fastener tab of the ZIF socket.

Figure 8. Installing Heat Sink Clip

11.Record the processor in the equipment log.

Table des matières

Autres manuels NEC Serveur

NEC

NEC Express5800/T110i-S Manuel utilisateur

NEC

NEC NEAX 2000 Manuel utilisateur

NEC

NEC HX4000 Manuel utilisateur

NEC

NEC Express5800/120Bb-d6 Manuel utilisateur

NEC

NEC NECCare Gold Express5800/320Fd Manuel utilisateur

NEC

NEC UNIVERGE NEAX 2000 IPS Manuel utilisateur

NEC

NEC Express5800/120Mc2 series Mode d’emploi

NEC

NEC Express5800/R120e-2M Manuel utilisateur

NEC

NEC Express5800/E120d-1 Manuel technique

NEC

NEC Univerge SV8100 Guide de l'utilisateur

NEC

NEC UX5000 Manuel utilisateur

NEC

NEC EXPRESS 5800 ES1400 SERIES Online Manuel utilisateur

NEC

NEC MC2400 Manuel utilisateur

NEC

NEC EXP200 Manuel utilisateur

NEC

NEC NECCare Platinum Express5800/A1160 Manuel utilisateur

NEC

NEC NEC Express5800 Series Manuel utilisateur

NEC

NEC EXPRESS5800/120Lf Manuel utilisateur

NEC

NEC Express5800/R120h-1M Manuel utilisateur

NEC

NEC Express5800/D120h Manuel utilisateur

NEC

NEC Express5800/320Ma Manuel utilisateur

NEC

NEC Express 5800/R320c-E4 Manuel utilisateur

NEC

NEC N8800-103F Manuel utilisateur

NEC

NEC EXPRESS5800/140He Manuel utilisateur

NEC

NEC US110 Manuel utilisateur

Manuels Serveur populaires d'autres marques

HP AlphaServer ES47 Manuel utilisateur

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

HP ProLiant Gen9 Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur

Planet

Planet NAS-7410 Manuel utilisateur