NEC NP06CM Mode d’emploi
Portable Projector
NP06CM Ceiling Mount Unit
Installation and Adjustment Manual
Thank you for your purchase of the NEC Portable projector ceiling mount unit.
Please read this installation and adjustment manual carefully to ensure proper use.
Special skills are required for the installation of the Portable projector.
This work should never be performed by the customer.
To the Dealer and the Installer
For the safety of the customer, we ask that the installation work be started
after careful attention is paid to the strength of the mounting location to be
sure it will withstand the weight of the Portable projector and mounting
hardware.
CONTENTS
Heed the Following ............................................................................2
Preparation..........................................................................................4
List of Packaged Parts.............................................................................4
Names of the Parts...................................................................................5
Dimensions ...............................................................................................6
Guide to Screen Size and Projector Mounting Position .......................6
Mounting the Projector ......................................................................7
Adjustment of the Projection Angle................................................11
Cleaning the filter ...................................................................................14
Specifications ...................................................................................15
Printed in Japan
NP06CM-0704K-1
PRINTED WITH
SOY INK
TM
Printed on recycled paper.
NP06CM-E07.3.209:02AMページ1
2
Heed the Following
•When installing the projector, be sure to
do so as explained in this manual. The
projector may fall and cause injury if it is
installed improperly.
•To prevent the projector from falling, install
it in a place and fasten it in a way with
sufficient strength to support the combined
weight (21.6kg) of the projector (17.7kg)
and the ceiling mount unit (3.9kg) for an
extended period of time as well as to
withstand earthquakes. Insufficient
strength or fastening may result in the
projector falling and causing injury.
•To ensure safety, be sure to tighten the
bolts and screws securely. Also be sure to
use the included brackets and other metal
fittings. Failure to do so may result in the
projector falling and causing injury.
•When sliding the opening of the mounting
adapter over the pin of the ceiling
attachment unit, check that the pin of the
ceiling attachment unit is fully seated in
the opening. If not, the projector may fall
and cause injury.
•Do not modify any parts. Doing so may
result in the projector falling and causing
injury.
WARNING
•Do not use broken parts. Doing so may
result in the projector falling and causing
injury. If a part should be broken, consult
your dealer.
•Do not look into the lens when the
projector is turned on. Doing so could
damage your eyesight.
•Make adjustments as described in this
manual.
Incorrect adjustments may result in the
projector falling and causing injury.
This symbol alerts the user that important information concerning the
operation and maintenance of this unit has been provided. The
information should be read carefully to avoid problems.
NP06CM-E07.3.209:02AMページ2
3
CAUTION
•Do not obstruct the projector's ventilation
holes. Doing so will prevent the dissipation
of heat and may result in fires. In
particular, do not use the projector in the
following ways:
Do not install the projector in a wall or in a
tight place where ventilation is poor, place
a cover it, etc.
•Do not install the projector in front of the
outlets of an air conditioner or heater or in
a place where vibrations are strong.
Doing so may result in fires.
•Do not install the projector in humid or
dusty places or exposed to smoke or
steam (such as near cooking equipment or
humidifiers). Doing so may result in fires.
•When installing the projector, leave
sufficient space between it and
surrounding objects. Failure to leave
sufficient space will prevent the dissipation
of heat and may result in fires.
•When removing the screws on left and
right on the mounting adapter, be sure to
support the projector while doing so.
Failing to do so may result in the projector
swinging back abruptly and causing injury.
•for PLUGGABLE EQUIPMENT, the
socket-outlet shall be installed near the
equipment and shall be easily accessible.
Installation Precautions
•Special techniques are required for the
installation work of the projector and
installation work should only be
undertaken by qualified and licenced
installers.
•NEC Display Solutions will not accept any
responsibility related to any accidents or
incidents due to insufficient or inferior
mounting techniques.
Installation Location
Avoid places of high temperature or low
temperature.
(For ambient operating temperature, see the
user's manual included with the projector.)
Avoid places exposed to direct sunlight and
the vicinity of ventilation holes of room air
conditioning and heating.
Avoid rooms with a lot of dust, humidity,
greasy smoke, or tobacco smoke.
Dirt will adhere to optical parts such as
lenses and mirrors and this will cause a
deterioration of image quality.
Avoid places in which the screen is exposed
to direct sunlight or illumination light.
When surrounding light directly hits the
screen, the image appears washed out and
is difficult to view.
Heed the Following
NP06CM-E07.3.209:02AMページ3
4
Preparation
List of Packaged Parts
Installation and adjustment manual...1
Up-down angle adjustment screws (M5) ...4
Projector mounting screws (long M4 screws) ...5
Projector mounting adapter...1
Fixed ceiling part...1
Terminal cover...1
Terminal cover mounting screws (short M4 screws) ...4
NP06CM-E07.3.209:02AMページ4
Preparation
5
Names of the Parts
Inclination axis screws
Left-right angle adjustment
screws
Inclination adjustment screws
Up-down angle adjustment screws
[Front view]
[Right side view]
●
●
●
●
Fixed ceiling part
Projector mounting
adapter
Projector mounting
adapter
Fixed ceiling part
NP06CM-E07.3.209:02AMページ5
For the distance to the screen and the picture size, see the projector's operating instructions.
•The ceiling mount unit can be adjusted up and down a maximum of +/-10˚, but if too much
of an angle is taken the image will show some distortion. Therefore, it is recommended that
an adjustment is made in conjunction with the screen projection angle.
6
Dimensions
Fixed Ceiling Part Bolt Hole Position Dimensions
Fixed Ceiling Part and Lens Center Dimensions Diagram
Unit: mm
Preparation
210
180
228.9
140
117.4
117.4
410
176
120
150
Center line of fixed ceiling part
Lens center
Lens center
Lens center
Center line of fixed
ceiling part
Distance to lens end
Guide to Screen Size and Projector Mounting Position
NP06CM-E07.3.209:02AMページ6
7
1
2
Mounting the Projector
Attach the Fixed Ceiling Part to the Ceiling
First, partially tighten the four nuts, then tighten the nuts firmly
after positioning.
Attach the Projector Mounting Adapter to the Projector
Align the holes of the projector mounting adapter with the holes at the bottom surface of
the projector, then securely tighten the five supplied (M4) screws.
Use M8 bolts for the fixed ceiling part.
Use of types other than M8 could
cause the projector to fall.
WARNING!
Fixed ceiling part
WARNING!
The use of screws other than those supplied for mounting purposes may
cause the projector to be damaged or fall and cause injury. Please be sure to
use the supplied screws.
Projector mounting adapter
Bottom surface of projector
Long screw
NP06CM-E07.3.209:02AMページ7
8
3Suspend the Projector from the Fixed Ceiling Part
Slide the slotted part of the projector mounting adapter over the pin of the fixed ceiling
part and push all the way to the back.
The projector is temporarily suspended in this condition and attention must be paid so
that the unit does not fall since it is not fixed in place.
Slotted part of mounting adapter
Pin of fixed ceiling part
4Temporarily Fasten the Projector Mounting Adapter
Temporarily fasten by partially tightening the four supplied (M5) screws.
Tighten firmly after completing the screen projection angle adjustment.
Mounting the Projector
Temporarily fasten also the other side.
NP06CM-E07.3.209:02AMページ8
Mounting the Projector
9
5After connecting all the cables, mount the terminal cover.
Line up the projecting parts of the projector mount adapter with the holes in the
included terminal cover, and fasten securely using the four included screws (M4).
Line up the projecting parts with
the positions of the holes
Line up the projecting parts with
the positions of the holes
Short screw
NP06CM-E07.3.209:02AMページ9
10
Installation Examples
When the Ceiling is Wood Construction:
Mounting board
(Strong enough to support the weight of the whole unit.)
Washer
Beam
Nut and washer
Bolt (M8)
When the Ceiling is Concrete Construction:
Anchor nut (Purchase commercially-available M8-type anchor nuts that are
strong enough to endure the weight of the whole unit.)
Ceiling
Washer
Bolt (M8)
NOTE : Mounting boards, M8-type anchor nuts, bolts, nuts and washers are
commercially available.
Mounting the Projector
NP06CM-E07.3.209:02AMページ10
Table des matières
Autres manuels NEC Projecteur
NEC
NEC LT240K, LT260K Manuel utilisateur
NEC
NEC PH1201QL Manuel utilisateur
NEC
NEC NP4000 Manuel utilisateur
NEC
NEC NP100 - SVGA DLP Projector Manuel utilisateur
NEC
NEC NP510WS Series Manuel utilisateur
NEC
NEC PA600X Series Manuel utilisateur
NEC
NEC NP40 Manuel utilisateur
NEC
NEC VT670 Series Manuel utilisateur
NEC
NEC VE281X Manuel utilisateur
NEC
NEC MultiSync LT245 Manuel utilisateur
NEC
NEC DT100 - MultiSync XGA LCD Projector Manuel utilisateur
NEC
NEC VT46 Manuel utilisateur
NEC
NEC PX602UL-BK Manuel utilisateur
NEC
NEC U300X Series Manuel utilisateur
NEC
NEC VT650 Instructions de montage
NEC
NEC GT5000 Series Manuel utilisateur
NEC
NEC Nighthawk SX10000D Manuel utilisateur
NEC
NEC VT570 Series Manuel utilisateur
NEC
NEC V230X Manuel utilisateur
NEC
NEC NP50 Series Manuel
Manuels Projecteur populaires d'autres marques
Panasonic
Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur
BenQ
BenQ SH753P Manuel utilisateur
Eiki
Eiki EK-623U series Manuel utilisateur
Epson
Epson PowerLite Pro Cinema 6020UB Manuel utilisateur
Epson
Epson PowerLite Home Cinema 705HD Manuel utilisateur
Christie
Christie LHD700 Manuel utilisateur
