NEC Flash Memory Programmer PG-FP3 Manuel utilisateur

User’s Manual

PG-FP3

Flash Memory Programmer

1991©

Printed in Japan

Document No. U13502EJ2V0UM00 (2nd edition)

Date Published July 1999 J CP(K)

1998

User's Manual U13502EJ2V0UM00

[MEMO]

User's Manual U13502EJ2V0UM00 3

SUMMARY OF CONTENTS

CHAPTER 1 GENERAL .....................................................................................................................................................17

CHAPTER 2 CONFIGURATION.........................................................................................................................................19

CHAPTER 3 STARTING AND STOPPING ........................................................................................................................27

CHAPTER 4 BASIC OPERATING PROCEDURE..............................................................................................................37

CHAPTER 5 COMMAND REFERENCE.............................................................................................................................45

CHAPTER 6 STAND-ALONE FUNCTION .........................................................................................................................67

CHAPTER 7 HARDWARE SPECIFICATIONS...................................................................................................................69

CHAPTER 8 ERROR MESSAGES AND REMEDIAL ACTIONS .......................................................................................87

APPENDIX A NOTES ON DESIGNING A TARGET............................................................................................................91

APPENDIX B REVISION HISTORY.....................................................................................................................................93

User's Manual U13502EJ2V0UM00

EEPROM is a trademark of NEC Corporation.

PC/AT is a trademark of International Business Machines Corporation.

Windows and Windows NT are either registered trademarks or trademarks of Microsoft Corporation in the United

States and/or other countries.

Pentium is a trademark of Intel Corporation in the United States.

User's Manual U13502EJ2V0UM00 5

• The information in this document is subject to change without notice. Before using this document,

please confirm that this is the latest version.

• No part of this document may be copied or reproduced in any form or by any means without the prior written

consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in

this document.

• NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual

property rights of third parties by or arising from use of a device described herein or any other liability arising

from use of such device. No license, either express, implied or otherwise, is granted under any patents,

copyrights or other intellectual property rights of NEC Corporation or of others.

• Descriptions of circuits, software, and other related information in this document are provided for illustrative

purposes in semiconductor product operation and application examples. The incorporation of these circuits,

software, and information in the design of the customer's equipment shall be done under the full responsibility

of the customer. NEC Corporation assumes no responsibility for any losses incurred by the customer or third

parties arising from the use of these circuits, software, and information.

M7A 98.8

User's Manual U13502EJ2V0UM00

Regional Information

Some information contained in this document may vary from country to country. Before using any NEC

product in your application, pIease contact the NEC office in your country to obtain a list of authorized

representatives and distributors. They will verify:

•

Device availability

•

Ordering information

•

Product release schedule

•

Availability of related technical literature

•

Development environment specifications (for example, specifications for third-party tools and

components, host computers, power plugs, AC supply voltages, and so forth)

•

Network requirements

In addition, trademarks, registered trademarks, export restrictions, and other legal issues may also vary

from country to country.

NEC Electronics Inc. (U.S.)

Santa Clara, California

Tel: 408-588-6000

800-366-9782

Fax: 408-588-6130

800-729-9288

NEC Electronics (Germany) GmbH

Duesseldorf, Germany

Tel: 0211-65 03 02

Fax: 0211-65 03 490

NEC Electronics (UK) Ltd.

Milton Keynes, UK

Tel: 01908-691-133

Fax: 01908-670-290

NEC Electronics Italiana s.r.l.

Milano, Italy

Tel: 02-66 75 41

Fax: 02-66 75 42 99

NEC Electronics (Germany) GmbH

Benelux Office

Eindhoven, The Netherlands

Tel: 040-2445845

Fax: 040-2444580

NEC Electronics (France) S.A.

Velizy-Villacoublay, France

Tel: 01-30-67 58 00

Fax: 01-30-67 58 99

NEC Electronics (France) S.A.

Spain Office

Madrid, Spain

Tel: 91-504-2787

Fax: 91-504-2860

NEC Electronics (Germany) GmbH

Scandinavia Office

Taeby, Sweden

Tel: 08-63 80 820

Fax: 08-63 80 388

NEC Electronics Hong Kong Ltd.

Hong Kong

Tel: 2886-9318

Fax: 2886-9022/9044

NEC Electronics Hong Kong Ltd.

Seoul Branch

Seoul, Korea

Tel: 02-528-0303

Fax: 02-528-4411

NEC Electronics Singapore Pte. Ltd.

United Square, Singapore 1130

Tel: 65-253-8311

Fax: 65-250-3583

NEC Electronics Taiwan Ltd.

Taipei, Taiwan

Tel: 02-2719-2377

Fax: 02-2719-5951

NEC do Brasil S.A.

Electron Devices Division

Rodovia Presidente Dutra, Km 214

07210-902-Guarulhos-SP Brasil

Tel: 55-11-6465-6810

Fax: 55-11-6465-6829

J99.1

User's Manual U13502EJ2V0UM00 7

Major Revisions in This Edition

Page Description

p.18 The setting of the baud rate and the capacity for downloading the user program in Table 1-1 have been

changed.

p.19 Figure 2-1 has been changed.

p.20 Figure 2-2 has been changed.

p.20 The description of EXPANSION CONNECTOR has been deleted from Section 2.2.

p.28 A description in Section 3.1 has been changed.

p.30 A description in Section 3.2 has been changed.

p.36 A description has been added to "Option setting" in Section 3.3.

p.46 A description has been added to Section 5.1.2.

p.50 A description in Section 5.2.2 has been changed.

p.58 A description in Section 5.3.2 has been changed.

p.59 A description in Section 5.3.3 has been changed.

p.61 A description in Section 5.3.4 has been changed.

p.62 A description in Section 5.3.5 has been changed and Caution has been added to Section 5.3.5.

p.62 A description in Section 5.3.6 has been changed.

p.65 A description in Section 5.4.3 has been changed.

p.72 A description in "Supported ROM specifications" in Section 7.2 has been changed.

p.73 A description has been deleted from Section 7.3.

p.77 The setting of the baud rate in Table 7-4 has been changed.

p.91 Figure A-1 has been changed.

p.92 Figure A-2 has been changed.

p.93 Appendix B has been added.

p.41 in the

first edition Section 5.3.2 has been deleted.

p.46 in the

first edition Section 5.3.7 has been deleted.

p.53 in the

first edition Section 5.4.6 has been deleted.

p.75 in the

first edition Section 7.5 has been deleted.

The mark shows major revised points.

User's Manual U13502EJ2V0UM00

[MEMO]

User's Manual U13502EJ2V0UM00 9

PREFACE

Readers of This Manual This manual is intended for user engineers who use the PG-FP3 to design and develop

systems with an NEC microcontroller with flash memory.

Purpose The PG-FP3 enables programs in the NEC microcontroller with flash memory to be

erased, written, or verified with the microcontroller mounted on a user-designed printed

circuit board through simple operations on a WindowsTM screen.

This manual contains the basic PG-FP3 specifications and explains how to use the

PG-FP3.

Organization This manual contains the following chapters:

General, Configuration, Starting and Stopping, Basic Operating Procedure, Command

Reference, Stand-alone Function, Hardware Specifications, and Error Messages and

Remedial Actions

How to Read This Manual To understand the basic specifications and operation of the PG-FP3, read this manual

in the order given in the table of contents. Be sure to read Chapter 3, which contains

important information on operating the PG-FP3.

It is assumed that the readers of this manual have a basic knowledge of electricity,

logic circuits, and microcontrollers. It is also assumed that, especially in the

description of applications, they have sufficient knowledge of Windows. For

information on using Windows 95 and Windows NTTM and for the related terminology,

refer to the appropriate Windows manual.

Legend Note : Explanation of the item so marked

Caution : Important information

Remark : Supplementary explanation

Numeric notation : Binary..............×××× or ××××B

Decimal ...........××××

Hexadecimal....0××××H or ××××H

User's Manual U13502EJ2V0UM00

Terminology PG-FP3 ................................... Flash memory programmer

FLASHPRO3 ........................... Windows application name of PG-FP3

Target ...................................... NEC microcontroller with flash memory or user board

on which such a microcontroller is mounted

Printer interface (IEEE 1284) ... Parallel interface specified by IEEE 1284-1994. Used

by the PG-FP3 as one of the host interfaces.

FA adapter ............................... Adapter board used to write programs to an NEC

microcontroller with flash memoryNote

Note The FA adapter board is a product of Naito Densei Machida Mfg. Co., Ltd.

Naito Densei Machida Mfg. Co., Ltd.: 044-822-3813

Table des matières

Autres manuels NEC Matériel réseau

NEC

NEC NE3203-153 Manuel utilisateur

NEC

NEC Univerge SV8100 Guide de l'utilisateur

NEC

NEC A201NE Manuel utilisateur

NEC

NEC N8104-213 Manuel utilisateur

NEC

NEC SIGMABLADE N8406-019 Manuel utilisateur

NEC

NEC Aspire Series Manuel utilisateur

NEC

NEC N8151-46 Manuel utilisateur

NEC

NEC Express5800/E120d-M Manuel utilisateur

NEC

NEC NVM Series Manuel utilisateur

NEC

NEC ipasolink 400 Manuel utilisateur

NEC

NEC QB-V850ESFJ3 Manuel utilisateur

NEC

NEC N8151-50 Manuel utilisateur

NEC

NEC NEAX 2400 IPX Manuel utilisateur

NEC

NEC 200 Manuel utilisateur

NEC

NEC SVP SERVER - Manuel utilisateur

NEC

NEC IP8800/S2400 Series Manuel utilisateur

NEC

NEC N8151-51A Guide de démarrage rapide

NEC

NEC NEAX 2400 IMX Manuel utilisateur

NEC

NEC DSX-160 Manuel utilisateur

NEC

NEC P401-TMX4D Manuel utilisateur

NEC

NEC UX5000 Manuel utilisateur

NEC

NEC NRS Expanded Series Manuel utilisateur

NEC

NEC HS3-40 Manuel utilisateur

NEC

NEC N8146-28 Manuel utilisateur

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur