NEC MultiSync V754Q Manuel utilisateur

NEC Display Solutions of America, Inc.

www.necdisplay.com OLR-751

IR Touch Overlay

Installation Guide for the OLR-751 Rev 1.0

1.0 Contents

Guide Purpose Page 1

Notes and Warnings Page 1

Equipment Page 2

Dimensional Drawings Page 2

Installation Procedure Page 3

2.0 Purpose

2.1 This procedure describes the steps to install the IR touch overlay onto the C751Q display.

3.0 Notes and Warnings

3.1 Prior to installing the overlay, remove the NEC badge from the bottom edge of the monitor.

3.2 The overlay contains tempered glass. Use caution when handling.

3.3 The overlay has an integrated USB cable located along the bottom edge of the overlay. Ensure the

cable is not pinched, crushed, or damaged during installation.

3.4 Installation requires two persons at all times to ensure the touch frame does not bend or torque.

3.5 Once the touch screen is installed, do not lift the monitor by grasping or holding the touch screen

overlay.

3.6 Contact NEC Display Solutions support if you have any questions or require additional installation

guidance support.

500 Park Boulevard, Suite 1100

Itasca, IL 60143

Phone: (800) 632-4662

www.necdisplay.com OLR-751

NEC Display Solutions of America, Inc.

IR Touch Overlay

Installation Guide for the OLR-751 Rev 1.0

4.0 Equipment

5.0 Dimensional Drawings

(1) C751Q IR Overlay

(1) Spare #6-32 Philips flathead

machine screw

(1) 10ft. USB Extension Cable

NEC Display Solutions of America, Inc.

www.necdisplay.com OLR-751

IR Touch Overlay

Installation Guide for the OLR-751 Rev 1.0

6.0 Installation Procedure

6.1 Remove the overlay from the packaging. Place the overlay face down on a padded surface and verify

the material contents (see Equipment on Page 2).

6.2 Use a #2 Philips screwdriver to remove the five (5) #6-32 flathead screws securing the bottom

bracket to the overlay.

6.2.1 Do NOT remove any remaining screws from the overlay.

6.4 Use a cloth and mild cleaner to clean the monitor and inside surface of the overlay.

6.4.1 Do not use any chemical solvents, such as acidic or alkali solutions.

6.4.2 If available, use compressed air after cleaning to remove any lint or dust.

6.3 Remove the bottom bracket from the overlay.

6.3.1 Set the screws and bracket aside for reuse in steps 6.9 and 6.10.

www.necdisplay.com OLR-751

NEC Display Solutions of America, Inc.

IR Touch Overlay

Installation Guide for the OLR-751 Rev 1.0

6.5 With the help from at least one partner, gently install the overlay on the monitor.

6.5.1 Hook the top bracket of the overlay on the top of the monitor.

6.5.2 Slide the overlay toward the bottom of the monitor. The sides of the overlay will slide past the

sides of the monitor.

6.5.3 Lower the overlay down to the monitor surface.

Step 6.5.1 Step 6.5.2 Step 6.5.3

6.6 Be sure the USB cable is toward the bottom of the monitor and is not crushed or pinched

during installation.

6.7 Be sure not to scratch or damage the monitor or glass surface while installing the overlay.

6.8 Double check the monitor panel and overlay glass for dirt, smudges, or dust before securing

the overlay to the monitor.

6.9 Return the bottom bracket to its original position.

6.10 Replace the five (5) #6-32 flathead screws to secure the bottom bracket to the overlay.

6.12 Touch overlay hardware installation completed. Attach the USB output cable to your PC or media

player and enjoy your new touch capabilities!

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels NEC Moniteur

NEC

NEC E421 Manuel utilisateur

NEC

NEC MultiSync LCD1970NX Manuel utilisateur

NEC

NEC MultiSync X462UN Mode d’emploi

NEC

NEC V421-2 Manuel utilisateur

NEC

NEC MultiSync LCD1980SX-BK Manuel utilisateur

NEC

NEC EA273WM-BK Manuel utilisateur

NEC

NEC MultiSync LCD1700M+ Manuel utilisateur

NEC

NEC MultiSync LCD1530V Manuel utilisateur

NEC

NEC MultiSync LCD1512 Manuel utilisateur

NEC

NEC JC-1401P3A Manuel utilisateur

NEC

NEC P703 Manuel utilisateur

NEC

NEC MultiSync LCD1770GX Manuel utilisateur

NEC

NEC JC1402HME Manuel utilisateur

NEC

NEC HR17 MultiSync Manuel utilisateur

NEC

NEC AccuSync AS271F Manuel utilisateur

NEC

NEC MultiSync EA275UHD Manuel utilisateur

NEC

NEC MultiSync X461S Manuel utilisateur

NEC

NEC AccuSync LCD51VM Manuel utilisateur

NEC

NEC MD242C2 Instructions d'utilisation et de sécurité

NEC

NEC MultiSync X474HB Manuel utilisateur

NEC

NEC V652-PC Manuel utilisateur

NEC

NEC MultiSync FP2141SB Manuel utilisateur

NEC

NEC LCD8205 - MultiSync - 82" LCD Flat Panel... Guide de l'utilisateur

NEC

NEC MultiSync EA271Q Manuel utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation

LG M1950D-PZ Manuel utilisateur