NEC MultiSync V520 Manuel d'installation et d'exploitation
MultiSync V520
MultiSync V720
Users Manual
We hereby certify that color monitors
MultiSync V520 (N9501)
MultiSync V720 (N9701)
are in compliance with
Council Directive 73/23/EEC
-EN 60950
Council Directive 89/336/EEC
-EN 55022
-EN 60555-2 (for V720)
-EN 61000-3-2 (for V520)
-EN 61000-3-3
-EN 50082-1
(IEC 801-2)
(IEC 801-3)
(IEC 801-4)
and marked with
Declaration of the Manufacturer
NEC Home Electronics, Ltd.
686-1 NISHIOI OI-MACHI,
ASHIGARAKAMI-GUN
KANAGAWA 258-8533, JAPAN
Declaration
Safety Instruction
Caution:
When operating the V520/V720 with a 220-240V AC power source
in Europe except UK, use the power cord provided with the monitor.
In UK, a BS approved power cord with moulded plug has a Black
(five Amps) fuse installed for use with this equipment. If a power cord
is not supplied with this equipment please contact your supplier.
When operating the V520/V720 with a 220-240V AC power source
in Australia, use the power cord provided with the monitor.
For all other cases, use a power cord that matches the AC voltage of
the power outlet and has been approved by and complies with the
safety standard of your particular country.
ENERGY STAR®Product
As an ENERGY STAR Partner, NEC Technologies has determined that
this product meets the ENERGY STAR guidelines for energy efficiency.
The ENERGY STAR emblem does not represent EPA endorsement of
any product or service.
CSA
This Class B digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulation.
Cet appareil numerique de la class B respecte toutes les exigences
du Reglement sur le materiel brouilleur du Canada.
IBM is registered trademark of International Business Machines Corporation
Apple and Macintosh are registered trademarks of Apple Computer Inc.
Microsoft and Windows are registered trademarks of the Microsoft Corporation.
ENERGY STAR is a U.S. registered mark.
NEC is a registered trademark of NEC Corporation.
Ergo Design is a registered trademarks of NEC Home Electronices, Ltd. In U.K., Germany,
France, Spain, Italy, Denmark, Norway, Sweden and Benelux.
IPM, OSM, ColorControl, OptiClear, GlobalSync, EdgeLock, and Advanced Digital Control
System are trademarks of NEC Home Electronices, Ltd.
MultiSync is a registered trademark of NEC Technologies, Inc in U.S. and of NEC Home
Electronices, Ltd in Canada, U.K., Germany, France, Spain, Italy, Austria, Benelux,
Switzerland, Denmark, Finland, Norway and Saudi Arabia.
All other trademarks or registered trademarks are property of their respective owners.
V Series monitor box* should contain the following:
MultiSync V Series Monitor with tilt / swivel base
MultiSync V520
MultiSync V720
Power cord
Captive Signal Cable
Users manual
* Remember to save your original box and packing material to
transport or ship the monitor.
Contents
E-1
E
To attach the MultiSync V Series monitor to your
system, follow these instruction:
1 Turn off the power to your computer and MultiSync monitor.
2 If necessary, install the display card. For more information, refer to
the display card manual.
3For the PC: Connect the 15-pin mini D-SUB of the captive signal
cable to the connector of the display card in your system (Figure A.1)
Tighten all screws.
For the Mac: Connect the MultiSync V520 or V720 Macintosh Cable
Adapter (not included) to the monitor connector on the Macintosh
(Figure B.1). Attach the 15-pin mini D-SUB end of the captive signal
cable to the Macintosh cable adapter on the computer (Figure B.1).
Tighten all screws.
4 Connect one end of the power cord to the MultiSync V Series
monitor and the other end to the power outlet (Figure C.1).
5 Turn on the monitor (Figure D.1) and the computer.
6 This completes the installation.
NOTE: If you have any problems, please refer to the
Troubleshooting section of this Users Manual.
Quick Start
E-2
FigureA.1 15 pin mini D-SUB
Captive Signal Cable
E-3
E
Figure D.1
Figure B.1
Captive Signal Cable
15-pin mini D-SUB
Mac Adapter
(not included)
Computer
Power cord
Power Outlet
Figure C.1
Tilt / swivel base fixing, removing
Fixing
This product consists of the MultiSync monitor and the tilt / swivel base.
When fixing the tilt / swivel base to the MultiSync monitor, please
follow the steps below.
Push the six hooks of the tilt / swivel base into the six holes at the
bottom of the MultiSync monitor.
Then slide the tilt /swivel base forward.
Then the latch above the tilt / swivel base engages it is secure.
E-4
Removing
Please removing the tilt / swivel base when transporting for repair.
Push down the latch of the MultiSync monitor and pull out the tilt /
swivel base.
Slide backward the tilt / swivel base from the front of the MultiSync
monitor.
Pull out the tilt / swivel base from the holes of the MultiSync monitor.
E-5
Controls
OSM(On-screen Manager) control buttons on the front of
the monitor function as follows:
SELECT Enters and exits the OSM menu.
CONTROL-/+ Selects one of the controls and decreases or
increases the adjustment.
RESET Resets the highlighted control to the factory setting.
Press -/+ button at the same time for approximately 1 sec.
Brightness: Adjusts the overall image and background
screen brightness.
Contrast: Adjusts the image brightness in relation to the
background.(Contrast control is also effective with -/+
button even though OSM window is not visible.)
Red Color Control: Adjust the red contrast of the display.
Green Color Control: Adjust the green contrast of the
display.
Blue Color Control: Adjust the blue contrast of the display.
Horizontal: Moves the image horizontally left or right.
Vertical position: Moves the image vertically up or down.
Horizontal size: Decreases or increases the horizontal
size of the image.
Vertical size: Decreases or increases the vertical size of the
image.
The Geometry controls allow you to adjust the curvature or angle of
the sides of your display.
R
G
B
E
E-6
Pincushion/Barrel: Decreases or increases the curvature
of the sides either inward or outward.
Trapezoid: Decreases or increases the bottom of the
screen to be the same as the top.
Parallelogram: Decreases or increases the tilt of the sides
either to the left or right.
Bow (Pincushion Balance): Decreases or increases the
curvature of the sides either to the left or right.
Rotates: Rotates the image.
Degauss: Select the degauss icon on Icon select
window and push SELECT button.
It will eliminate the stray magnetic field and correct the
scan of the electron beam, which affect the purity, focus
and convergence.
Note: Allow a minimum interval of 20 minutes to elapse
between uses of the degauss function.
Color Temperature: Select the Color Temperature icon
on Icon Select Window and push SELECT button.
It can be switched to change the color Temperature.
(9300K,7500K, 6500K, user)
OSD: There are 3 background colours (Blue, Black, and
white). These can be selected by SELECT button after
the selection of OSD on Icon select window.
EXIT: To exit OSM window. Select EXIT on Icon select
window, then push SELECT button.
Note: If you do not push buttons within 10 seconds in OSM
condition, the window will automatically disappear.
exit
9300K
OSD
Autres manuels pour MultiSync V520
2
Ce manuel convient aux modèles suivants
1
Table des matières
Langues :
Autres manuels NEC Moniteur
NEC
NEC NEC MultiSync LCD2110 LCD2110 LCD2110 Manuel utilisateur
NEC
NEC MultiSync X461S Manuel utilisateur
NEC
NEC MultiSync X462HB Manuel utilisateur
NEC
NEC 1850X Manuel utilisateur
NEC
NEC MultiSync LCD1990FXp Manuel utilisateur
NEC
NEC MultiSync XV17 Manuel utilisateur
NEC
NEC MultiSync 24WMGX3 Manuel utilisateur
NEC
NEC P232W-BK Manuel utilisateur
NEC
NEC MultiSync LCD195WXM Manuel utilisateur
NEC
NEC MultiSync FE750 JC-17W40 Manuel utilisateur
NEC
NEC 42XP10 - PlasmaSync - 42" Plasma Panel Manuel utilisateur
NEC
NEC LCD1560NX - MultiSync - 15" LCD Monitor Manuel utilisateur
NEC
NEC MD213MC - MultiSync - 21.3" LCD Monitor Manuel utilisateur
NEC
NEC MultiSync FP955 Manuel utilisateur
NEC
NEC A Series Manuel utilisateur
NEC
NEC MultiSync LCD225WXM-BK Manuel utilisateur
NEC
NEC MultiSync LCD2010X Manuel utilisateur
NEC
NEC ShadowSense Touch MultiSync P404 SST Manuel utilisateur
NEC
NEC LCD52VM - AccuSync - 15" LCD Monitor Manuel utilisateur
NEC
NEC MD210C2 Instructions d'utilisation et de sécurité
