NEC MultiSync FE1250+ Manuel utilisateur

MultiSync FE1250+

User’s Manual

English-1

English

For the Customer to use in

U.S.A. or Canada

Canadian Department of Communications

Compliance Statement

DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing

Equipment Regulations.

C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to

CSA C22.2 #950.

FCC Information

1. Use the attached specified cables with the MultiSync NSV1117STTKW colour monitor so as not

to interfere with radio and television reception.

(1) Please use the supplied power cable or equivalent to ensure FCC compliance.

(2) Shielded captive type signal cable.

Use of other cables and adapters may cause interference with radio and television

reception.

2. This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses, and can radiate radio frequency energy, and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

- Consult your dealer or an experienced radio/TV technician for help.

If necessary, the user should contact the dealer or an experienced radio/television technician for

additional suggestions. The user may find the following booklet, prepared by the Federal

Communications Commission, helpful: “How to Identify and Resolve Radio-TV Interference

Problems.”This booklet is available from the U.S. Government Printing Office, Washington, D.C.,

20402, Stock No. 004-000-00345-4.

No user serviceable parts inside. Do not attempt to modify this equipment. If modified, your

authority to operate this equipment might be voided by FCC.

VCCI Statement

English-2

Declaration

Declaration of the Manufacturer

We hereby certify that the color monitor

MultiSync FE1250+ (NSV1117STTKW) is in

compliance with Council Directive 73/23/EEC:

- EN 60950

Council Directive 89/336/EEC:

- EN 55022

- EN 61000-3-2

- EN 61000-3-3

- EN 55024

and marked with

NEC-Mitsubishi Electric Visual Systems Corporation

4-13-23, Shibaura,

Minato-Ku

Tokyo 108-0023, JAPAN

English-3

English

ENERGY STA R ®is a U.S. registered trademark. All other brands and product names are trademarks or

registered trademarks of their respective owners.

As an ENERGY STA R Partner, NEC-Mitsubishi Electric Visual Systems Corporation has determined that

this product meets the ENERGY STA R guidelines for energy efficiency.

The ENERGY STA R emblem does not represent EPA endorsement of any product or service.

All other trademarks mentioned in this manual are the property of their respective owners.

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT

TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED

PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS

UNLESS THE PRONGS CAN BE FULLY INSERTED.

REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE

COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE

POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY

DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT

THE POWER CORD FROM THE AC OUTLET. DO NOT REMOVE

COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol warns user that uninsulated voltage within the unit may

have sufficient magnitude to cause electric shock. Therefore, it is

dangerous to make any kind of contact with any part inside this unit.

This symbol alerts the user that important literature concerning the

operation and maintenance of this unit has been included. Therefore, it

should be read carefully in order to avoid any problems.

CAUTION

WARNING

RISK OF ELECTRIC SHOCK •DO NOT OPEN

Safety Instruction

English-4

TCO’99

Congratulations! You have just purchased a

TCO’99 approved and labeled product! Your choice

has provided you with a product developed for

professional use.Your purchase has also contributed

to reducing the burden on the environment and also

to the further development of environmentally

adapted electronics products.

Why do we have environmentally labelled computers?

In many countries, environmental labelling has become an established

method for encouraging the adaptation of goods and services to the

environment. The main problem, as far as computers and other

electron-ics equipment are concerned, is that environmentally harmful

substances are used both in the products and during their manufacture.

Since it is not so far possible to satisfactorily recycle the majority of

electronics equipment, most of these potentially damaging substances

sooner or later enter nature.

There are also other characteristics of a computer, such as energy

consumption levels, that are important from the viewpoints of both the

work (internal) and natural (external) environments. Since all methods

of electricity generation have a negative effect on the environment (e.g.

acidic and climate-influencing emissions, radioactive waste), it is vital to

save energy. Electronics equipment in offices is often left running

continuously and thereby consumes a lot of energy.

What does labelling involve?

This product meets the requirements for the TCO’99 scheme which

provides for international and environmental labelling of personal

computers. The labelling scheme was developed as a joint effort by the

TCO (The Swedish Confederation of Professional Employees), Svenska

Naturskyddsforeningen (The Swedish Society for Nature Conservation)

and Statens Energimyndighet (The Swedish National Energy Adminis-

tration).

Approval requirements cover a wide range of issues: environment,

ergonomics, usability, emission of electric and magnetic fields, energy

consumption and electrical and fire safety.

English-5

English

The environmental demands impose restrictions on the presence and

use of heavy metals, brominated and chlorinated flame retardants,

CFCs (freons) and chlorinated solvents, among other things. The

product must be prepared for recycling and the manufacturer is obliged

to have an environmental policy which must be adhered to in each

country where the company implements its operational policy.

The energy requirements include a demand that the computer and/or

display, after a certain period of inactivity, shall reduce its power con-

sumption to a lower level in one or more stages. The length of time to

reactivate the computer shall be reasonable for the user.

Labelled products must meet strict environmental demands, for

example, in respect of the reduction of electric and magnetic fields,

physical and visual ergonomics and good usability.

Below you will find a brief summary of the environmental requirements

met by this product. The complete environmental criteria document may

be ordered from:

TCO Development

SE-114 94 Stockholm, Sweden

Fax: +46 8 782 92 07

Email (Internet): development@tco.se

Current information regarding TCO’99 approved and labelled products

may also be obtained via the Internet, using the address:

http://www.tco-info.com/

Environmental requirements

Flame retardants

Flame retardants are present in printed circuit boards, cables, wires,

casings and housings. Their purpose is to prevent, or at least to delay

the spread of fire. Up to 30% of the plastic in a computer casing can

consist of flame retardant substances. Most flame retardants contain

bromine or chloride, and those flame retardants are chemically related

to another group of environmental toxins, PCBs. Both the flame

retardants containing bromine or chloride and the PCBs are suspected

of giving rise to severe health effects, including reproductive damage in

fish-eating birds and mammals, due to the bio-accumulative* processes.

Flame retardants have been found in human blood and researchers fear

that disturbances in foetus development may occur.

English-6

The relevant TCO’99 demand requires that plastic components weighing

more than 25 grams must not contain flame retardants with organically

bound bromine or chlorine. Flame retardants are allowed in the printed

circuit boards since no substitutes are available.

Cadmium**

Cadmium is present in rechargeable batteries and in the colour-

generating layers of certain computer displays. Cadmium damages the

nervous system and is toxic in high doses. The relevant TCO‘99

requirement states that batteries, the colour-generating layers of display

screens and the electrical or electronics components must not contain

any cadmium.

Mercury**

Mercury is sometimes found in batteries, relays and switches. It

damages the nervous system and is toxic in high doses. The relevant

TCO‘99 requirement states that batteries may not contain any Mercury.

It also demands that no mercury is present in any of the electrical or

electronics components associated with the labelled unit.

CFCs (freons)

The relevant TCO‘99 requirement states that neither CFCs nor HCFCs

may be used during the manufacturing and assembly of the product.

CFCs (freons) are sometimes used for washing printed circuit boards.

CFCs break down ozone and thereby damage the ozone layer in the

stratosphere, causing increased reception on Earth of ultraviolet light

with e. g. increased risks of skin cancer (malignant melanoma) as a

consequence.

Lead**

Lead can be found in picture tubes, display screens, solders and

capacitors. Lead damages the nervous system and in higher doses,

causes lead poisoning. The relevant TCO‘99 requirement permits the

inclusion of lead since no replacement has yet been developed.

*Bio-accumulative is defined as substances which accumulate within living

organisms.

**Lead, Cadmium and Mercury are heavy metals which are Bio-accumulative.

English-7

English

Contents

Your new MultiSync FE1250+ monitor box* should contain the following:

• MultiSync FE1250+ Monitor with tilt/swivel base

• Power cord

• Captive Signal Cable

• User’s Manual

• CD-ROM:

Includes complete User’s Manual in PDF format and Windows related

files (Inf file and color profile). To see the complete User’s Manual,

Acrobat Reader 4.0 must be installed at your PC.

* Remember to save your original box and packing material to

transport or ship the monitor.

Power Cord

Captive Signal Cable

User’s Manual

CD-ROM

English-8

Quick Start

To attach the MultiSync FE1250+ monitor to your system, follow these

instructions:

1. Turn off the power to your computer.

2. If necessary, install the display card into your system. For more

information, refer to the display card manual.

3. For the PC: Connect the 15-pin mini D-SUB of the captive signal

cable to the connector of the display card in your system

(Figure A.1). Tighten all screws.

For the Mac: Connect the Macintosh cable adapter (not included) to

the monitor connector on the Macintosh (Figure B.1). Attach the

15-pin mini D-SUB end of the captive signal cable to the Macintosh

cable adapter on the computer (Figure B.1). Tighten all screws.

4. The Windows®95/98/2000 INF file for your MultiSync monitor can be

found on the CD-ROM, delivered with the monitor.

5. Connect one end of the power cord to the MultiSync FE1250+

monitor and the other end to the power outlet (Figure C.1).

6. Turn on the monitor (Figure D.1) and the computer.

NOTE: If you have any problems, please refer to the

Troubleshooting section of this User’s Manual.

Captive Signal Cable

15-pin mini D-SUB

Figure A.1

English-9

English

Figure B.1

Figure C.1

15-pin mini D-SUB

Captive Signal Cable

Computer Mac Adapter

(not included)

Power Outlet

Power Cord

Power Button

Figure D.1

Autres manuels pour MultiSync FE1250+

Table des matières

Autres manuels NEC Moniteur

NEC

NEC MultiSync LCD2690WUXi Guide de l'utilisateur

NEC

NEC PlasmaSync 50XM4 Guide de configuration rapide

NEC

NEC LCD6520L-BK-AV - MultiSync - 65" LCD Flat Panel... Manuel utilisateur

NEC

NEC LCD1915X Manuel utilisateur

NEC

NEC AccuSync LCD19WV Manuel utilisateur

NEC

NEC AccuSync LCD72VX Guide de référence rapide

NEC

NEC LCD4020-BK-AV - 40IN LCD 1200:1 1366X768 60HZ Dvi-d... Guide de l'utilisateur

NEC

NEC MultiSync LCD6520 Manuel utilisateur

NEC

NEC MultiSync 75F-3 Manuel utilisateur

NEC

NEC PlasmaSync 42XM4 Manuel utilisateur

NEC

NEC MultiSync P462 Mode d’emploi

NEC

NEC LCD175VXM - MultiSync - 17" LCD Monitor Manuel utilisateur

NEC

NEC AccuSync LCD52V Manuel utilisateur

NEC

NEC FA Series Manuel utilisateur

NEC

NEC PlasmaSync PX-50XM4G Manuel utilisateur

NEC

NEC MultiSync P701 Manuel utilisateur

NEC

NEC PlasmaSync PX-42VM1G Manuel utilisateur

NEC

NEC MultiSync LCD1550ME Manuel utilisateur

NEC

NEC LCD1770GX-BK Manuel utilisateur

NEC

NEC MultiSync P521 Manuel de la liste des pièces

NEC

NEC MultiSync LCD1535VI Manuel utilisateur

NEC

NEC PlasmaSync 3300 Manuel utilisateur

NEC

NEC LCD2190UXI - MultiSync - 21.3" LCD Monitor Manuel utilisateur

NEC

NEC LCD1770V - MultiSync - 17" LCD Monitor Manuel utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation

LG M1950D-PZ Manuel utilisateur