NEC MultiSync E750 Manuel utilisateur
MultiSync E750
MultiSync E950
User's Manual
Declaration
Declaration of the Manufacturer
We hereby certify that the color monitors
MultiSync E750 JC-1747UMW
MultiSync E950 JC-1945UMW
are in compliance with
Council Directive 73/23/EEC:
- EN 60950
Council Directive 89/336/EEC:
- EN 55022
- EN 61000-3-2
- EN 61000-3-3
- EN 50082-1
(IEC 801-2)
(IEC 801-3)
(IEC 801-4)
and marked with
NEC Home Electronics, Ltd.
686-1, NISHIOI OI-MACHI
ASHIGARAKAMI-GUN
KANAGAWA 258-8533, JAPAN
Safety Instruction
Caution:
When operating the JC-1747UMW/JC-1945UMW with a 220-240V AC
power source in Europe except UK, use the power cord provided with the
monitor.
In UK, a BS approved power cord with moulded plug has a Black (five
Amps) fuse installed for use with this equipment. If a power cord is not
supplied with this equipment please contact your supplier.
When operating the JC-1747UMW/JC-1945UMW with a 220-240V AC
power source in Australia, use the power cord provided with the monitor.
For all other cases, use a power cord that matches the AC voltage of the
power outlet and has been approved by and complies with the safety
standard of your particular country.
ENERGY STAR®Product
As an ENERGY STAR Partner, NEC Technologies has determined that this
product meets the ENERGY STAR guidelines for energy efficiency. The
ENERGY STAR emblem does not represent EPA endorsement of any product
or service.
IBM is registered trademark of International Business Machines Corporation.
Apple and Macintosh are registered trademarks of Apple Computer Inc.
Microsoft and Windows are registered trademarks of the Microsoft Corporation.
ENERGY STAR is a U.S. registered trademark.
NEC is a registered trademark of NEC Corporation.
ErgoDesign is a registered trademarks of NEC Home Electronics, Ltd. in U.K., Germany, France, Spain, Italy, Denmark,
Norway, Sweden and Benelux.
IPM, OSM, ColorControl, OptiClear, GlobalSync, EdgeLock and Advanced Digital Control System are trademarks of
NEC Home Electronics, Ltd.
MultiSync is a registered trademark of NEC Technologies, Inc in U.S. and of NEC Home Electronics, Ltd in Canada, U.K.,
Germany, France, Spain, Italy, Austria, Benelux, Switzerland, Denmark, Finland, Norway and Saudi Arabia.
All other trademarks or registered trademarks are property of their respective owners.
TCO’99
Congratulations!
You have just purchased a TCO'99 approved
and labelled product! Your choice has
provided you with a product developed for
professional use. Your purchase has also
contributed to reducing the burden on the
environment and also to the further
development of environmentally adapted
electronics products.
Why do we have environmentally labelled
computers?
In many countries, environmental labelling has become an established
method for encouraging the adaptation of goods and services to the
environment. The main problem, as far as computers and other
electronics equipment are concerned, is that environmentally harmful
substances are used both in the products and during their manufacture.
Since it is not so far possible to satisfactorily recycle the majority of
electronics equipment, most of these potentially damaging substances
sooner or later enter nature.
There are also other characteristics of a computer, such as energy
consumption levels, that are important from the viewpoints of both the
work (internal) and natural (external) environments. Since all methods of
electricity generation have a negative effect on the environment (e.g.
acidic and climate-influencing emissions, radioactive waste), it is vital to
save energy. Electronics equipment in offices is often left running
continuously and thereby consumes a lot of energy.
What does labelling involve?
This product meets the requirements for the TCO'99 scheme which
provides for international and environmental labelling of personal
computers. The labelling scheme was developed as a joint effort by the
TCO (The Swedish Confederation of Professional Employees), Svenska
Naturskyddsforeningen (The Swedish Society for Nature Conservation)
and Statens Energimyndighet (The Swedish National Energy
Administration).
Approval requirements cover a wide range of issues: environment,
ergonomics, usability, emission of electric and magnetic fields, energy
consumption and electrical and fire safety.
The environmental demands impose restrictions on the presence and use
of heavy metals, brominated and chlorinated flame retardants, CFCs
(freons) and chlorinated solvents, among other things. The product must
be prepared for recycling and the manufacturer is obliged to have an
environmental policy which must be adhered to in each country where
the company implements its operational policy.
The energy requirements include a demand that the computer and/or
display, after a certain period of inactivity, shall reduce its power
consumption to a lower level in one or more stages. The length of time to
reactivate the computer shall be reasonable for the user.
Labelled products must meet strict environmental demands, for example,
in respect of the reduction of electric and magnetic fields, physical and
visual ergonomics and good usability.
Below you will find a brief summary of the environmental requirements
met by this product. The complete environmental criteria document may
be ordered from:
TCO Development
SE-114 94 Stockholm, Sweden
Fax: +46 8 782 92 07
Current information regarding TCO'99 approved and labelled products
may also be obtained via the Internet, using the address:
http://www.tco-info.com/
Environmental requirements
Flame retardants
Flame retardants are present in printed circuit boards, cables, wires,
casings and housings. Their purpose is to prevent, or at least to delay the
spread of fire. Up to 30% of the plastic in a computer casing can consist
of flame retardant substances. Most flame retardants contain bromine or
chloride, and those flame retardants are chemically related to another
group of environmental toxins, PCBs. Both the flame retardants
containing bromine or chloride and the PCBs are suspected of giving rise
to severe health effects, including reproductive damage in fish-eating
birds and mammals, due to the bio-accumulative* processes. Flame
retardants have been found in human blood and researchers fear that
disturbances in foetus development may occur.
The relevant TCO'99 demand requires that plastic components weighing
more than 25 grams must not contain flame retardants with organically
bound bromine or chlorine. Flame retardants are allowed in the printed
circuit boards since no substitutes are available.
Cadmium**
Cadmium is present in rechargeable batteries and in the
colour-generating layers of certain computer displays. Cadmium
damages the nervous system and is toxic in high doses. The relevant
TCO'99 requirement states that batteries, the colour-generating layers of
display screens and the electrical or electronics components must not
contain any cadmium.
Mercury**
Mercury is sometimes found in batteries, relays and switches. It damages
the nervous system and is toxic in high doses. The relevant TCO'99
requirement states that batteries may not contain any mercury. It also
demands that mercury is not present in any of the electrical or electronics
components associated with the labelled unit.
CFCs (freons)
The relevant TCO'99 requirement states that neither CFCs nor HCFCs
may be used during the manufacture and assembly of the product. CFCs
(freons) are sometimes used for washing printed circuit boards. CFCs
break down ozone and thereby damage the ozone layer in the
stratosphere, causing increased reception on earth of ultraviolet light with
e.g. increased risks of skin cancer (malignant melanoma) as a
consequence.
Lead**
Lead can be found in picture tubes, display screens, solders and
capacitors. Lead damages the nervous system and in higher doses, causes
lead poisoning. The relevant TCO'99 requirement permits the inclusion of
lead since no replacement has yet been developed.
* Bio-accumulative is defined as substances which accumulate within
living organisms
** Lead, Cadmium and Mercury are heavy metals which are
Bio-accumulative.
English
Contents
MultiSync E Series monitor box* should contain the
following:
• MultiSync E Series Monitor with tilt/swivel base
MultiSync E750 (JC-1747UMW) or
MultiSync E950 (JC-1945UMW)
• Power cord
• Captive Signal Cable
• User’s manual
* Remember to save your original box and packing material to transport
or ship the monitor.
Power cord
(E750)
User's
manual Captive Signal
Cable
Power cord
(E950)
E-1
Quick Start
To attach the MultiSync E Series monitor to your system,
follow these instructions:
1. Turn off the power to your computer and MultiSync monitor.
2. If necessary, install the display card. For more information, refer to the
display card manual.
3. For the PC: Connect the 15-pin mini D-SUB of the captive signal cable
to the connector of the display card in your system (Figure A.1, A.2).
Tighten all screws.
For the Mac: Connect the MultiSync E750 or MultiSync E950 Macintosh
Cable Adapter (not included) to the monitor connector on the Macintosh
(Figure B.1). Attach the 15-pin mini D-SUB end of the captive signal cable
to the Macintosh cable adapter on the computer (Figure B.1). Tighten all
screws.
4. Connect one end of the
power cord to the
MultiSync E Series monitor
and the other end to the
power outlet (Figure C.1,
C.2).
5. Turn on the monitor
(Figure D.1) and the
computer.
6. This completes the
installation.
NOTE: If you have any
problems, please
refer to the
Troubleshooting
section of this
User's Manual.
15-pin mini D-SUB
Captive Signal Cable
Figure A.2 (E950)
Captive Signal Cable
15-pin mini D-SUB
Figure A.1 (E750)
E-2
Autres manuels pour MultiSync E750
1
Ce manuel convient aux modèles suivants
3
Table des matières
Langues :
Autres manuels NEC Moniteur
NEC
NEC E654 Manuel utilisateur
NEC
NEC AccuSync 120 Manuel utilisateur
NEC
NEC ASLCD52V-BK-TC - AccuSync - 15" LCD Monitor Manuel utilisateur
NEC
NEC LCD1700V - MultiSync - 17" LCD Monitor Manuel utilisateur
NEC
NEC PlasmaSync 42PD1 Manuel utilisateur
NEC
NEC LCD22WV-BK - AccuSync - 22" LCD Monitor Manuel utilisateur
NEC
NEC 1500M LA-1524HMW Manuel utilisateur
NEC
NEC LED-06AF1 Manuel utilisateur
NEC
NEC MULTISYNC LCD1510+ Manuel
NEC
NEC LCD4610-BK - MultiSync - 46" LCD Flat Panel... Manuel utilisateur
NEC
NEC MultiSync X551UN Manuel utilisateur
NEC
NEC LCD2190UXP - MultiSync - 21" LCD Monitor Manuel utilisateur
NEC
NEC ShadowSense V Series Manuel utilisateur
NEC
NEC M40B-AV - 40" LCD Flat Panel Display Instructions d'installation et d'utilisation
NEC
NEC MD212G3 Instructions d'utilisation et de sécurité
NEC
NEC PowerMate eco Guide de configuration
NEC
NEC MultiSync ME501 Manuel utilisateur
NEC
NEC AccuSync 50 Manuel utilisateur
NEC
NEC LCD1570NX - MultiSync - 15" LCD Monitor Manuel utilisateur
NEC
NEC MultiSync LCD1700M Manuel utilisateur
