NEC LED-E012i-108 Manuel

I nst allat ion and

Maint enance m anual

LED Display Kit

[ Models for indoor use]

LED-E012i-108

LED-E012i-217

LED-E015i-135

LED-E018i-162

LED-E025i-217

MODELS: LED-E012i, LED-E015i, LED-E018i, LED-E025i

Ta ble of Cont ent s

I m port a nt I nform a t ion ...................................................................English-1

About t he LED lam ps ......................................................................English-4

Lam p break- in ...................................................................................................... English-4

Cont e nt s .........................................................................................English-5

Par t s N a m e ....................................................................................English-7

I nst a lla t ion Ex a m ple ......................................................................English-8

1. I nstallat ion location....................................................................................................... 8

2. I nstallat ion Setup ....................................................................................................... 10

3. Wiring ....................................................................................................................... 22

4. I nstalling t he pixel card ............................................................................................... 27

Screen Conguration ....................................................................English-29

I m a ge Set t ing ..............................................................................English-38

M a in t en an ce .................................................................................English-40

Trou ble shoot ing ...........................................................................English-43

1. Display problem s ........................................................................................................ 43

2. St ate m onitoring using t he software .............................................................................. 44

Specications ...............................................................................English-49

Diagr a m .......................................................................................English-50

English - 1

I m port a nt I nfor m a t ion

Sa fe t y Pr e ca u t ions a nd M a in t en ance

FOR OPTI MUM PERFORMANCE, PLEASE NOTE

THE FOLLOWI NG WHEN SETTI NG UP AND

USI NG THE LED DI SPLAY SYSTEM:

Abou t t h e Sym b ols

To ensure safe and proper use of the product, t his m anual uses a num ber of sym bols t o prevent

injury t o you and ot hers as well as dam age t o property. The symbols and their meanings are

described below. Be sure to underst and them t horoughly before reading t his m anual.

W ARN I N G

Fa iling t o h e ed t h is sym b ol a n d h a ndlin g t h e prod uct

in cor r ect ly could result in accide n t s le a ding t o m a j or

in j ur y or dea t h.

CAUTI ON

Fa iling t o h e ed t h is sym b ol a n d h a ndlin g t h e prod uct

in cor r ect ly could result in pe r son al in j u ry or da m a g e t o

sur rou ndin g pr ope rt y.

Ex am ple s of sym bols

I n dicat e s a w a r nin g or ca u t ion.

Th is sym b ol indicat e s you sh ou ld be ca r eful o f e le ct r ic shock s.

I n dicat e s a pr oh ibit e d a ct ion.

Th is sym b ol indicat e s som e t h ing t hat m u st be proh ibit e d.

I n dicat e s a m a nda t or y a ct ion.

Th is sym b ol indicat e s t ha t t h e pow e r cor d sh ou ld be u n plugg ed fr om t h e

pow er out le t .

English - 2

● Be sure to read the following before using the product to use it correctly and safely.

W ARN I N G

Do not apply vibrat ions or shocks to the

product.

Do not install t he product t o unst able

locat ions or locations subj ect to vibrat ions.

Always ask a technician t o perform t he

installation.

Do not connect the cables w it h wet hands.

Ot her wise, it m ay cause an inj ury or an

electrical shock.

Do not repair or m odify t he product yourself.

Otherwise, it may cause an injury, a re or an

electrical shock.

I n case of thunder, do not touch the power

cord. Ot herwise, it m ay cause an elect rical

shock.

Connect the product to t he correct volt age.

I f t he product is connect ed to a volt age other

than the specied voltage, it may lead to a

re or an electrical shock.

I n case of a malfunct ion (not hing is displayed

on t he screen, et c.) or if sm oke, abnorm al

heat, or a strange sound or odor is generated,

turn the power off and im m ediately ask a

technician or your ret ailer for repair.

I nstall the product so t hat the vents are not

obstruct ed.

Make sure there are enough people available

to ensure safety (at least two people) when

installing or m oving the product . Ot herwise, it

m ay lead t o an inj ury.

Be sure t o ground the pr oduct. I f the pr oduct

is not grounded, there is a risk of electrical

shock in case a m alfunct ion occur s.

I n case for eign m att er has ent er ed int o the

product , im m ediat ely disconnect t he pow er

supply and st op using t he product .

After t he inst allat ion, if a problem such as

loose screw s occurs, im m ediately ask a

technician or your ret ailer for repair.

Do not put obj ect s int o the product .

Otherwise, it may cause a re or an electrical

shock.

I n case the product is in contact wit h water

or anot her liquid, im m ediat ely disconnect the

power supply and stop using t he product. I f

you continue using the product in t hat st at e,

it may lead to a malfunction, a re, or an

electrical shock.

English - 3

This product can only be serviced in t he count ry where it was purchased.

CAUTI ON

Do not dam age the power cord. Do not put

heavy object s on it, place it near heat ers, pull

it with excessive strengt h, or apply a strong

force on it while it is bent.

A damaged power cord may cause a re or an

electrical shock.

Do not install the product in narrow places

where heat t ends t o build up.

Do not use the product in an environment

with low heat dissipation.

Ot herwise, it m ay cause a m alfunct ion.

The RJ-45 port of the product is for use

with t he product only. Do not connect it to a

net work. Connecting this port to a net work

that m ay receive over-voltage current m ay

cause dam age to t he product or an electrical

shock.

Do not use the product in a vehicle or anot her

m eans of transport at ion.

Do not use or store the product in t he

following places.

• Near heaters

• Places with lot s of hum idit y or dust, or

places subj ect t o oily sm ok e

• Places where water or oil m ay splash

• Places with lot s of corrosive gases, such as

near hot springs

• Places where t he product m ay fr eeze

• Do not place t he product on it s side, face

down, or upside down.

• Places wit h lot s of vibrat ions

I f you will not be using t he product for a long

t im e, disconnect it from the power dist ribut or

for safety purposes.

Disconnect the power supply when

perform ing t he m aintenance.

I nstall the pr oduct in accordance with the

local laws and regulat ions.

Do not place t he product under direct sunlight

or near heaters.

This product is designed t o be used indoors.

Do not use it outdoors. Ot herwise, it m ay

cause a m alfunct ion.

English - 4

About t he LED lam ps

LED lam ps are sensitive t o static elect ricity and surge voltage, w hich m ay dam age t heir com ponent s

and decrease their reliabilit y.

Take m easures against static electricity during t he installation. Do not t ouch the LED display areas.

The LED lam ps m ay absorb and hold m oist ure during the LED m odule inst allation or if not used for

a long tim e. Therefore, in such cases, the bright ness m ust be increased gradually during a break- in

period before set t ing the norm al brightness.

I f t he LED lam ps are lit wit h 100% bright ness while m oist ure is ret ained, t he tem perature will r ise very

quickly and t he wat er inside the lam ps will evaporat e and expand. This will cause t he encapsulating

resin to expand, which m ay lead to separat ion of t he boundary surface inside the LED lamps. This

separat ion can cause t he LED lam ps not to light up properly.

Lam p break- in

Congure the brightness settings as shown below with a video displayed on the LED module.

After a break-in period of approxim at ely 3 hours, t he LED m odule can be used under norm al

conditions.

Time since start-up: 0

(just after start-up)

1 hour 2 hours 3 hours

Full white Normal operation70%50%

80%60%40%

Brightness

value 20%

Normal operation

Video content

English - 5

Con t ent s

The supplied part s are as follows.

I n case one of these part s is m issing or dam aged, cont act the ret ailer.

Part s Specications Quant ity

LED-E012i-108 LED-E015i-135 LED-E018i-162 LED-E012i-217 LED-E025i-217

Bot tom frame 1 1 1 2

Bot tom fram e

connecting part

- - - 1

Bot tom fram e

connecting screw

PM3 - - - 8

KM3 - - - 8

Mounting bar 2 2 3 4

Alignm ent bar 2 2 2 2

Cabinet hanger pin Head diam et er

10 m m x 25 m m

16 20 36 64

Bot tom fram e

screw

M6 x 16 6 6 9 12

Over fram e (top) 1 1 1 1

Over fram e ( left,

right)

2 2 2 2

Corner fram e 2 2 2 2

Slot nut M3 x 13 mm 12 15 18 24

Screw for the slot

nut

M3 x 10 mm 12 15 18 24

English - 6

Part s Specications Quant ity

LED-E012i-108 LED-E015i-135 LED-E018i-162 LED-E012i-217 LED-E025i-217

Cabinet alignm ent

bracket

35 x 35 x 6 m m 10 12 14 18

Fixing screw for t he

cabinet alignm ent

bracket

Hexagonal socket

head screw (M4

x 12)

40 48 56 72

Pixel card 64 100 144 256

Cabinet 600 m m x 337.5

m m

16 25 36 64

Connection screw

for LED m odules

M6 x 26 mm 56 90 132 240

LED contr oller Novast ar MCTRL

660Pro

1 1 1 - 1

Novast ar MCTRL

- - - 1 -

LAN cable for the

LED m odules

750 m m - - - - 4

200 m m 12 20 30 48 56

LAN cable for the

LED contr oller

20000 m m 4 5 6 8 8

24000 m m - - - 8 -

Power cord for t he

LED m odules

950 m m 2 2 - -

300 m m - 1 6 8

Power cord for t he

LED contr oller

1 1 1 1

Power cord

connector

WAGO (2pcs) 4 6 12 16

WAGO (3pcs) 2 3 6 8

USB ash memory 1 1 1 1

Safety Manual 1 1 1 1

Packing list 1 1 1 1

English - 7

Pa rt s N a m e

3 4

1Pixel card

2Cabinet

3LAN cable input/ output

4LAN cable input (not used wit h t his product)

5Power cord input/ output

6Hub board

7Power unit

English - 8

I nst a lla t ion Exa m ple

1 . I nst allat ion loca t ion

Before the installat ion, be sure to review the following safety precaut ions to ensure proper and safe

installat ion.

CAUTI ON

• Ask a technician to perform the inst allation.

• Make sure t he product is m oved and inst alled by enough people to ensure safet y.

• Make sure t hat t he beam s or t he other struct ures to which t he product is installed have enough st rengt h t o

support the weight of the product, and make sure that the product is securely xed.

• Do not inst all directly t he product to a surface that has not enough st rengt h.

• When inst alling t he product in a narrow place ( in a wall, etc.) , leave gaps around the LED screens as

shown in the gure below to prevent an increase in the temperature. The gure below is only an example.

Pay par ticular at tent ion t o the installation environm ent ( heat from t he exter nal envir onm ent , dir ect

sunlight, heat generated by t he num ber of display s) in order t o facilitate cooling of the LED m odules.

If cooling is not sufcient, take measures, such as increasing the distance from the walls or installing a

for ced-air cooling syst em .

Ask a t echnician or your retailer for m ore det ails.

A B C

m in distance t o sides m in. dist ance t o top and bott om Distance between wall and system

60 m m 60 m m 20 m m

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels NEC Moniteur

NEC

NEC AccuSync LCD72V Manuel utilisateur

NEC

NEC 50XR4 Manuel utilisateur

NEC

NEC FE770/FE771 Manuel utilisateur

NEC

NEC PV32-AVT Manuel utilisateur

NEC

NEC MultiSync EA273WM Manuel de la liste des pièces

NEC

NEC MultiSync V552 Manuel utilisateur

NEC

NEC MultiSync LCD300 Manuel utilisateur

NEC

NEC LCD22WV-BK - AccuSync - 22" LCD Monitor Manuel utilisateur

NEC

NEC LCD1990SXi BK MultiSync -LCD Manuel utilisateur

NEC

NEC P221W-BK - MultiSync - 22" LCD Monitor Manuel utilisateur

NEC

NEC LCD1501-BK Manuel utilisateur

NEC

NEC AccuSync LCD224WM Manuel utilisateur

NEC

NEC FE2111SB - MultiSync - 22" CRT Display Manuel utilisateur

NEC

NEC AccuSync PV32 Manuel utilisateur

NEC

NEC LCD1980SX - MultiSync - 19" LCD Monitor Manuel utilisateur

NEC

NEC NEC MultiSync LCD2110 LCD2110 LCD2110 Manuel utilisateur

NEC

NEC LCD1810 - MultiSync - 18.1" LCD Monitor Manuel utilisateur

NEC

NEC PLASMA50USER Manuel utilisateur

NEC

NEC AccuSync LCD73VM Manuel utilisateur

NEC

NEC LCD175VXM - MultiSync - 17" LCD Monitor Manuel utilisateur

NEC

NEC MultiSync EA190M Mode d’emploi

NEC

NEC MultiSync P402 Mode d’emploi

NEC

NEC AccuSync LCD72VXM Manuel utilisateur

NEC

NEC MultiSync EA244WMi Guide de l'utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation

LG M1950D-PZ Manuel utilisateur