NCR 7360-K074 Manuel
Kit Instructions
IPCamera (Standard) Field Upgrade
7360-K074
Issue A
ii
The product described in this document is a licensed product of NCR Corporation.
NCR is a registered trademark of NCR Corporation. NCR FastLane SelfServ™ Checkout is a trademark of NCR Corporation in the
United States and/or other countries. Other product names mentioned in this publication may be trademarks or registered
trademarks of their respective companies and are hereby acknowledged.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
Where creation of derivative works, modifications or copies of this NCR copyrighted documentation is permitted under the terms
and conditions of an agreement you have with NCR, NCR's copyright notice must be included.
It is the policy of NCR Corporation (NCR) to improve products as new technology, components, software, and firmware become
available. NCR, therefore, reserves the right to change specifications without prior notice.
All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances,
photographs are of equipment prototypes. Software screen images are representative, and in some cases, may not match a
customer’s installed software exactly. Therefore, before using this document, consult with your NCR representative or NCR office
for information that is applicable and current.
Copyright © 2022
By NCR Corporation
864 Spring St. NW
Atlanta, GA 30308
United States
All Rights Reserved
iii
Revision Record
Issue Date Remarks
AAug 2022 First Issue
IP Camera Field Upgrade (Standard)
This publication provides procedures for installing the IP Camera Field Upgrade
(Standard) to the NCRFastLane SelfServ™ Checkout (7360).
Kit Contents
Part Number Description
497-0532762 Kit - IP Camera Field Upgrade (Standard)
497-0532090 Tri-Light Cable Channel Bracket
497-0532089 Tri-Light C-clamp Bracket
006-8611462 Screw - M4x8 Phillips Panhead Machine
497-0532122 Tri-LightCamera Bracket - VTC
497-0532349 IP Camera - PoE/12V, VTC WDIN28ATM1P, 2MP, 2.8mm Lens
009-0007953 Nut M3 Self Locking
2 IP Camera Field Upgrade (Standard)
Part Number Description
006-8624498 Screw - M4x.7x8mm, Flat Head, Stainless
* 007-9714414 Tie Strap Plain 5.60LG
* 497-0519622 Label - Hole Cover, Mid - Silver (3 pcs)
* 497-0423108 Instructions Kit (Reference Sheet)
* Items marked with an asterisk are not called out on the image.
Customer Supplied Devices
The following devices must be supplied by the customer:
• 802.3at (PoE+) Compatible Switch/Injector
• Ethernet (LAN) Cable
IP Camera Field Upgrade (Standard) 3
Installation Procedure
To install the IPCamera Field Upgrade (Standard), follow these steps:
Note: Ensure that the NCR Customer Helpdesk is informed when the Tri-Light/Lane
Light with IPCamera is installed in the store.
1. Remove the existing Tri-Light/Lane Light Assembly, if necessary. For more
information, refer to Removing the Tri-Light/Lane Light (R6) on the next page.
2. Install the IP Camera (Standard) to the Tri-Light/Lane Light Assembly, refer to
Installing the IP Camera on page6.
3. Install the Tri-Light with IPCamera Assembly. For more information, refer to
Installing the Tri-Light/Lane Light with IPCamera Assembly on page10.
4. Configure the Camera Settings. For more information, refer to Configuring the Camera
Settings on page49.
Note: For more information about setting up the camera, refer to VTCNetwork
Camera User Manual.
4 IP Camera Field Upgrade (Standard)
Removing the Tri-Light/Lane Light (R6)
To remove the Tri-Light/Lane Light Assembly, follow these steps:
1. Turn off the NCRSelfServ Checkout software and hardware systems. For more
information, refer to the NCR SelfServ™ Checkout (7360) Hardware Service Guide
(B005–0000–2378).
2. Remove one (1) screw to detach the Tri-Light/Lane Light Assembly from the Tri-
Light/Lane Light Pole, as shown in the image below.
IP Camera Field Upgrade (Standard) 5
3. Lift the Tri-Light/Lane Light Assembly and then disconnect the cables.
Tip: Mark all cables as to where they are connected to quickly determine the
corresponding port when reconnecting the cables.
6 IP Camera Field Upgrade (Standard)
Installing the IP Camera
To install the IPCamera (Standard) to the Tri-Light/Lane Light Assembly, follow these
steps:
1. Remove the existing Tri-Light/Lane Light Assembly. For more information, refer to
Removing the Tri-Light/Lane Light (R6) on page4.
2. Connect the LANCable to the IP Camera, as shown in image below.
IP Camera Field Upgrade (Standard) 7
3. Secure the LANCable to the Tri-Light Cable Channel Bracket using four (4) cable
ties, as shown in the image below.
4. Slide the Tri-Light C-clamp Bracket on the new Tri-Light/Lane Light Assembly.
Ce manuel convient aux modèles suivants
1
Autres manuels NCR Accessoires pour appareils photo
