National Instruments CVS-1459RT Manuel utilisateur

GETTING STARTED GUIDE

NI CVS-1459RT

USB3 Vision Compact Vision System with Reconfigurable I/O

The NI CVS-1459RT is a real-time, compact vision system that acquires, processes, and displays

images from USB3 Vision cameras. This document explains how to install and configure the

NI CVS-1459RT.

Contents

Required Components .............................................................................................................. 2

Optional Equipment.......................................................................................................... 2

Software Options .............................................................................................................. 3

Safety Information.................................................................................................................... 3

Electromagnetic Compatibility Guidelines .............................................................................. 4

Installing the Software.............................................................................................................. 5

Installing Vision Builder AI ............................................................................................. 5

Installing the Vision Development Module...................................................................... 5

Configuring the Hardware ........................................................................................................6

Wiring Power to the NI CVS-1459RT ............................................................................. 8

Connecting the System Power Supply...................................................................... 8

Connecting the Isolated Outputs Power Supply ....................................................... 8

Connecting USB3 Vision Cameras .................................................................................. 9

Connecting to the Development Computer ...................................................................... 9

Direct Connection..................................................................................................... 9

Network Connection................................................................................................. 9

Installing Software on the NI CVS-1459RT ............................................................................ 10

Configuring the Device in NI Vision Builder AI ............................................................. 10

Configuring the Device in NI MAX................................................................................. 10

Acquiring an Image .................................................................................................................. 11

Acquiring an Image in Vision Builder AI ........................................................................ 11

Acquiring an Image in MAX............................................................................................ 11

Digital I/O................................................................................................................................. 12

Where to Go Next..................................................................................................................... 14

Additional Resources for Vision Builder AI Users .......................................................... 14

Additional Resources for LabVIEW Users ...................................................................... 14

Worldwide Support and Services ............................................................................................. 15

2|ni.com |NI CVS-1459RT Getting Started Guide

Required Components

The following items are necessary to set up and use the NI CVS-1459RT:

NI CVS-1459RT device

One or two USB3 Vision cameras

One USB 3.0 cable per USB3 Vision camera

One CAT 5 10/100Base-TX, CAT 5e, or CAT 6 1000Base-T Ethernet cable to connect the

device to the development computer or to a network.

Note A CAT 5e or CAT 6 1000Base-T Ethernet cable is required to achieve

1,000 Mbps (Gigabit) Ethernet performance. CAT 5e and CAT 6 Ethernet cables

adhere to higher electrical standards required for Gigabit Ethernet communication.

CAT 5 cables are not guaranteed to meet the necessary requirements. While CAT 5

cables may appear to work at 1,000 Mbps, CAT 5 cables are likely to cause bit errors

resulting in degraded network performance.

Development computer running Microsoft Windows. Refer to the driver or application

development software readme for specific Windows version compatibility.

A compatible power supply, such as the NI PS-15 Power Supply (part number 781093-01)

Optional Equipment

National Instruments offers the following products for use with the NI CVS-1459RT:

24 VDC, 1.25 A Desktop Power Supply (part number 782032-01)

44-pin D-SUB cable for digital I/O

• 44-pin D-SUB male to pigtail cable (part number 156083-03 for 3 meter cable)

• 44-pin D-SUB male to 44-position D-SUB female cable (part number 156084-03 for

3 meter cable or part number 156084-0R5 for 0.5 meter cable)

NI CVS I/O Accessory

Note This accessory is unshielded.

• CVS I/O Accessory and 3 meter 44-pin D-SUB male to 44-position D-SUB female

cable (part number 783327-01)

• CVS I/O Accessory and 0.5 meter 44-pin D-SUB male to 44-position D-SUB female

cable (part number 783328-01)

NI CVS-1459RT Getting Started Guide |© National Instruments |3

DIN Rail Kit (part number 781740-01)

Serial cable (part number 182845-01 for 1 meter cable, part number 182845-02 for 2 meter

cable, or part number 182845-03 for 3 meter cable)

Software Options

Use the following software to develop applications with the NI CVS-1459RT.

NI-IMAQdx 14.0 or later driver software, included with NI Vision Acquisition Software

August 2014

One of the following options for developing machine vision applications:

• NI Vision Builder for Automated Inspection (Vision Builder AI) 2014 or later

• LabVIEW 2014 or later, LabVIEW Real-Time 2014 or later, and the NI Vision

Development Module 2014 or later

Software for using and reconfiguring the NI CVS-1459RT FPGA I/O. Different

configurations are referred to as hardware personalities, and are defined by bitfiles.

• LabVIEW FPGA Module 2014 or later—You must install the LabVIEW FPGA

Module to reconfigure the default personality of the NI CVS-1459RT FPGA.

• NI-IMAQ I/O 14.0 or later driver software, included with NI Vision Acquisition

Software August 2014—NI-IMAQ I/O is required to use the default personality of the

NI CVS-1459RT in LabVIEW, or to reconfigure the default personality of the

NI CVS-1459RT I/O in the LabVIEW FPGA Module.

Safety Information

Caution The following paragraphs contain important safety information you must

follow when installing and operating the device.

Do not operate the device in a manner not specified in the documentation. Misuse of the device

may result in a hazard and may compromise the safety protection built into the device. If the

device is damaged, turn it off and do not use it until service-trained personnel can check its

safety. If necessary, return the device to National Instruments for repair.

Keep away from live circuits. Do not remove equipment covers or shields unless you are trained

to do so. If signal wires are connected to the device, hazardous voltages can exist even when the

equipment is turned off. To avoid a shock hazard, do not perform procedures involving cover or

shield removal unless you are qualified to do so. Disconnect all field power prior to removing

covers or shields.

Because of the danger of introducing additional hazards, do not install unauthorized parts or

modify the device. Use the device only with the chassis, modules, accessories, and cables

specified in the installation instructions. All covers and filler panels must be installed while

operating the device.

4|ni.com |NI CVS-1459RT Getting Started Guide

This is a Pollution Degree 2 device. Do not operate the device in an explosive atmosphere or

where flammable gases or fumes may be present. Operate the device only at or below the

pollution degree stated in the specifications. Pollution consists of any foreign matter—solid,

liquid, or gas—that may reduce dielectric strength or surface resistivity. The following is a

description of pollution degrees.

• Pollution Degree 1—No pollution or only dry, nonconductive pollution occurs. The

pollution has no effect.

• Pollution Degree 2—Normally only nonconductive pollution occurs. Occasionally,

nonconductive pollution becomes conductive because of condensation.

• Pollution Degree 3—Conductive pollution or dry, nonconductive pollution occurs.

Nonconductive pollution becomes conductive because of condensation.

Clean the device and accessories by brushing off light dust with a soft, nonmetallic brush.

Remove other contaminants with a stiff, nonmetallic brush. The unit must be completely dry and

free from contaminants before returning it to service.

You must insulate signal connections for the maximum voltage for which the device is rated. Do

not exceed the maximum ratings for the device. Remove power from signal lines before

connection to or disconnection from the device.

Electromagnetic Compatibility Guidelines

This product was tested and complies with the regulatory requirements and limits for

electromagnetic compatibility (EMC) as stated in the product specifications. These requirements

and limits are designed to provide reasonable protection against harmful interference when the

product is operated in its intended operational electromagnetic environment.

This product is intended for use in industrial locations. There is no guarantee that harmful

interference will not occur in a particular installation, when the product is connected to a test

object, or if the product is used in residential areas. To minimize the potential for the product to

cause interference to radio and television reception or to experience unacceptable performance

degradation, install and use this product in strict accordance with the instructions in the product

documentation.

Furthermore, any changes or modifications to the product not expressly approved by National

Instruments could void your authority to operate it under your local regulatory rules.

Caution To ensure the specified EMC performance, operate this product only with

shielded cables and accessories.

NI CVS-1459RT Getting Started Guide |© National Instruments |5

Installing the Software

Before using the NI CVS-1459RT, you must install the application software and device drivers

on the development computer. National Instruments provides two options for developing

machine vision applications.

•NI Vision Builder AI—Interactive, menu-driven configuration software for developing,

benchmarking, and deploying machine vision applications.

•NI Vision Development Module—Programming library for developing machine vision

and scientific imaging applications. The NI Vision Development Module requires

LabVIEW, LabVIEW Real-Time, and NI-IMAQdx driver software.

Installing Vision Builder AI

Install Vision Builder AI from the Vision Builder AI installation media. Refer to the NI Vision

Builder for Automated Inspection Readme for installation instructions.

After installation, documentation for Vision Builder AI is available by selecting Start»

All Programs»National Instruments»Vision Builder AI»Documentation.

Vision Builder AI does not require additional software. Proceed to Configuring the Hardware.

Installing the Vision Development Module

Install the following software to use the Vision Development Module to develop applications

and LabVIEW FPGA to reconfigure the I/O. The software must be installed in this order.

1. LabVIEW—Refer to the LabVIEW Installation Guide for installation instructions and

system requirements for the LabVIEW software. Refer to the LabVIEW Upgrade Notes for

additional information about upgrading to the most recent version of LabVIEW.

Documentation for LabVIEW is available by selecting Start»All Programs»National

Instruments»LabVIEW.

2. LabVIEW Real-Time Module—Refer to the LabVIEW Real-Time Module Release and

Upgrade Notes for installation instructions and information about getting started with the

LabVIEW Real-Time Module.

Documentation for the LabVIEW Real-Time Module is available by selecting Start»

All Programs»National Instruments»LabVIEW.

3. LabVIEW FPGA Module—It is only necessary to install the LabVIEW FPGA Module if

you want to reconfigure the default personality of the NI CVS-1459RT I/O. Refer to the

LabVIEW FPGA Module Release and Upgrade Notes for installation instructions and

information about getting started with the LabVIEW FPGA Module.

Documentation for the LabVIEW FPGA Module is available by selecting Start»

All Programs»National Instruments»LabVIEW.

4. NI Vision Development Module—Refer to the NI Vision Development Module Readme

on the NI Vision Development Module installation media for system requirements and

installation instructions.

6|ni.com |NI CVS-1459RT Getting Started Guide

Documentation for the NI Vision Development Module is available by selecting Start»

All Programs»National Instruments»Vision»Documentation»NI Vision.

5. NI-IMAQdx—Refer to the NI Vision Acquisition Software Release Notes on the NI Vision

Acquisition Software installation media for system requirements and installation

instructions for the NI-IMAQdx driver.

Documentation for the NI-IMAQdx driver software is available by selecting Start»

All Programs»National Instruments»Vision»Documentation»NI-IMAQdx.

6. NI-IMAQ I/O—NI-IMAQ I/O is required to use the default personality of the

NI CVS-1459RT in LabVIEW, or to reconfigure the default personality of the

NI CVS-1459RT I/O in the LabVIEW FPGA Module. Refer to the NI Vision Acquisition

Software Release Notes on the NI Vision Acquisition Software installation media for

system requirements and installation instructions for the NI-IMAQ I/O driver.

Documentation for the NI-IMAQ I/O driver software is available by selecting Start»

All Programs»National Instruments»Vision»Documentation»NI-IMAQ I/O.

NI-IMAQ and NI-IMAQdx integrate with Measurement & Automation Explorer (MAX), the

National Instruments utility for configuring and testing your measurement and automation

system. The NI MAX icon appears on your desktop after you install one of the device drivers.

Configuring the Hardware

Remove the NI CVS-1459RT from the package and inspect the system for damage. Notify

National Instruments if the system appears damaged in any way. Do not use a damaged system.

Ensure that the AC input to the external power supply is disconnected before plugging in or

unplugging any connector. Ground the unit to minimize the possibility of static electricity

damage.

Complete the following sections to wire power to the NI CVS-1459RT, connect cameras, and

connect the NI CVS-1459RT to a development computer or network. Figure 1 and Figure 2

show the features on the device.

NI CVS-1459RT Getting Started Guide |© National Instruments |7

Figure 1. NI CVS-1459RT Power Connectors and Reset Button

Figure 2. NI CVS-1459RT Front Panel Connectors

1 Reset Button

2 System Power Connector

3 Isolated Outputs Power Connector

4 Chassis Grounding Screw

1 VGA Connector

2 RJ50 Serial Port

3 USB 2.0 Ports

4 RJ45 Network Port

5 USB3 Vision Ports

6 44-pin Digital I/O Connector

SYSTEM

12-24 V

C V

ISO

5-24 V

ISO

NI CVS-1459RT

Compact Vision System

RESET

DIGITAL I/O

10/100/

1000

ACT/

LINK

USER1

USER2

PWR/

FAULT

STATUS

8|ni.com |NI CVS-1459RT Getting Started Guide

Wiring Power to the NI CVS-1459RT

Refer to Figure 1 while connecting the NI CVS-1459RT power supplies.

Connecting the System Power Supply

Complete the following steps to supply power to the NI CVS-1459RT.

1. Make sure the power source is turned off.

2. If the power connector plug is connected to the chassis, disconnect it from the device.

Figure 3 shows the terminal screws, which secure the wires in the screw terminals, and the

connector screws, which secure the connector plug on the chassis.

Figure 3. Power Screw Terminal Connector Plug

Caution Do not tighten or loosen the terminal screws on the power connector while

the power is on.

3. Connect the positive lead of the power source to the V terminal of the power connector plug

and tighten the terminal screw to 0.2 to 0.25 N · m (1.8 to 2.2 lb · in.) of torque.

4. Connect the negative lead of the power source to the C terminal of the power connector plug

and tighten the terminal screw to 0.2 to 0.25 N · m (1.8 to 2.2 lb · in.) of torque.

5. Install the power connector plug into the SYSTEM power receptacle on the

NI CVS-1459RT chassis and tighten the connector screws to 0.4 N · m (3.5 lb · in.) of

torque.

6. Turn on the external power source. Verify the PWR/FAULT LED is lit green.

Connecting the Isolated Outputs Power Supply

Complete the following steps to supply power to the isolated outputs.

1. Make sure the power source is turned off.

2. If the power connector plug is connected to the chassis, disconnect it from the device.

Figure 3 shows the terminal screws, which secure the wires in the screw terminals, and the

connector screws, which secure the connector plug on the chassis.

Caution Do not tighten or loosen the terminal screws on the power connector while

the power is on.

1 V (Positive) Terminal Screw 2 C (Negative) Terminal Screw 3 Connector Screws

NI CVS-1459RT Getting Started Guide |© National Instruments |9

3. Connect the positive lead of the power source to the V terminal of the power connector plug

and tighten the terminal screw to 0.2 to 0.25 N · m (1.8 to 2.2 lb · in.) of torque.

4. Connect the negative lead of the power source to the C terminal of the power connector plug

and tighten the terminal screw to 0.2 to 0.25 N · m (1.8 to 2.2 lb · in.) of torque.

5. Install the power connector plug into the ISO power receptacle on the NI CVS-1459RT

chassis and tighten the connector screws to 0.4 N · m (3.5 lb · in.) of torque.

6. Turn on the external power source.

Connecting USB3 Vision Cameras

The NI CVS-1459RT supports two USB3 Vision cameras. Complete the following steps to

connect cameras to the NI CVS-1459RT.

1. Connect a USB3 Vision cable to a USB3 Vision camera.

2. Connect the other end of the cable to the NI CVS-1459RT Port 0. Repeat these steps for

Port 1 if you are connecting two cameras.

Connecting to the Development Computer

The NI CVS-1459RT can connect to the development computer directly or through a network.

To connect over a network, the device must be on the same subnet as the development computer.

Direct Connection

Complete the following steps to connect the device directly to the development computer.

1. Verify the that the development computer is powered on and connected to the network.

2. Connect one end of an Ethernet cable to the network port on the device.

3. Connect the free end of the cable to an Ethernet port on the development computer.

4. Verify the ACTIVITY/LINK LED on the port is on or blinking.

The device will use a link-local IP address when connected directly to the development

computer.

Network Connection

Complete the following steps to connect the device to the development computer over a network.

1. Verify the that the development computer is powered on and connected to the network.

2. Connect one end of an Ethernet cable to the network port on the device.

3. Connect the free end of the cable to an Ethernet hub or other network device.

4. Verify the ACTIVITY/LINK LED on the port is on or blinking.

The device will negotiate an IP address when connected to a network with a DHCP server or

comparable network device.

10 |ni.com |NI CVS-1459RT Getting Started Guide

Installing Software on the NI CVS-1459RT

Configure the NI CVS-1459RT in NI Vision Builder AI or NI MAX. If you use LabVIEW as

your application development environment, you must use MAX to configure the device.

Configuring the Device in NI Vision Builder AI

Complete the following steps to configure the device in Vision Builder AI.

1. Launch Vision Builder AI by navigating to Start»All Programs»National Instruments»

Vision Builder AI.

2. Select the NI CVS-1459RT from the list of available targets.

3. Select the Configure Target icon.

4. Complete the configuration wizard. At step 3, select Update Target Software to install

Vision Builder AI on the device.

Configuring the Device in NI MAX

Complete the following steps to configure the device in MAX.

1. Launch MAX by navigating to Start»All Programs»National Instruments»NI MAX or

by double-clicking the NI MAX desktop icon.

2. In the Configuration pane, expand Remote Systems to see a list of devices on the same

subnet.

3. Expand the NI CVS-1459RT. Right-click Software and select Add/Remove Software.

4. Select NI-IMAQdx,NI Vision-RIO,NI Vision RT,LabVIEW Real-Time, and NI-RIO.

Some features will automatically select required dependencies.

5. Complete the installation wizard.

Autres manuels pour CVS-1459RT

Table des matières

Autres manuels National Instruments Système de vision industrielle

National Instruments

National Instruments NI EVS-1464RT Manuel utilisateur

National Instruments

National Instruments PCIe-1433 Manuel utilisateur

National Instruments

National Instruments NI myRIO Manuel utilisateur

National Instruments

National Instruments NI EVS-1463 Manuel utilisateur

National Instruments

National Instruments NI Vision CVS-1450 Series Manuel utilisateur

National Instruments

National Instruments NI CVS-1458RT Manuel utilisateur

National Instruments

National Instruments NI Vision CVS-1450 Series Manuel utilisateur

National Instruments

National Instruments NI Vision CVS-1450 Series Manuel utilisateur

National Instruments

National Instruments CVS-1459 Manuel utilisateur

National Instruments

National Instruments ISC-1783 Manuel utilisateur

National Instruments

National Instruments Vision CVS-1455 Manuel utilisateur

National Instruments

National Instruments NI CVS-1458 Manuel utilisateur

Manuels Système de vision industrielle populaires d'autres marques

Festo

Festo SBOC-M-R1B-H Manuel utilisateur

Banner

Banner VE200G1B Manuel utilisateur

SVS-Vistek

SVS-Vistek CoaxPress EoSens Creation 1.1CXP2 Manuel utilisateur

Sony

Sony Vision Exchange PEQ-C100 Manuel utilisateur

Datalogic

Datalogic MX-U81 Instructions d'installation

Cognex

Cognex In-Sight D900 Series Manuel utilisateur

Spektrum

Spektrum SPMVR2520 Manuel utilisateur

Huaray

Huaray Movidius Series Manuel utilisateur

Daheng Imaging

Daheng Imaging MERCURY2 USB3 Manuel utilisateur

SVS-Vistek

SVS-Vistek exo174 U3 Series Manuel utilisateur

Teledyne

Teledyne e2v Eliixa+ Series Manuel utilisateur

Photron

Photron FASTCAM Mini CX Series Manuel utilisateur

Omron

Omron FH-L550 Manuel utilisateur

iGen

iGen NV20/20 Manuel utilisateur

JAI

JAI GO-5100MP-USB Manuel utilisateur

Ark Vision Systems

Ark Vision Systems AVS-Monitor 7 FHD Manuel utilisateur

Cognex

Cognex In-Sight 9902L Manuel utilisateur

Feniex

Feniex C-5500 Manuel utilisateur