Myride E SCOOTER ES9001 Manuel utilisateur
Electric Scooter
E SCOOTER ES9001
1
1
Table of Contents
1. The electric scooter and main parts ............................. 2, 3
2. Folding and unfolding..................................................... 4, 5
3. Display and functions...................................................... 6
4. Trouble Shooting …………………………….……..…. 7
5. Charging .......................................................................... 8
6. Specifications ................................................................... 9
7. Safety instructions ............................................................. 10
8. Care and Storage ................................................................ 11
9. Maintenance………………………………………………12
10. Warranty………………………………………………….13
11. Declaration………………………………………………..14
12. Contact us…………………………………………………15
.
2
2
I The ESCOOTER ES9001 main parts
1
2
3
4
5
6
7
14
8
9
10
11
15
12
13
3
3
1.Foldiung handlebar
2.Adjustable pole
3.Quick release
4.Head Light
5.Safety buckle
6.Folding Lock
7.Front suspension fork
8.Deck
9.Anti-slip sticker
10.Battery Case
11.Rear Suspension
12.Motor
13.Rear Light
14.Front Mudguard
15.Rear Mudguard
Folding Handlebar
1. Brake lever
2. Grip
3. Bell
4. Light Switch button
5. handlebar Sleeve
6. Connector for handlebar and pole
7. Display
8. Switch button
9. Mode Button
1
3
6
7
8
1
2
9
5
5
4
2
4
4
2 Folding and unfolding
1. Unfolding
When you take the electric scooter out from the carton, it is almost completely assembled, just
unfold the stem and handlebar, to fully expand the electric scooter.
1.1 How to unfold the stem?
Firstly, release the safety buckle.
Secondly, press the folding lock.
Thirdly, keep pressing the folding lock and pull up the stem to the correct position until you
hear a “click “sound.
Finally, lock the safety buckle to fix the stem into position.
1.2 How to unfold the handlebar?
After unfolding the stem, please unfold the handlebar to expand the ESCOOTER ES9001
scooter completely.
Pull down the handlebar sleeve and then lift the left and right handlebar to the horizontal
position, then rotate the right-side handlebar sleeve clockwise to fix the right-side handlebar,
then rotate the left side handlebar anticlockwise to fix the left side handlebar.
To adjust the height of the stem, just loosen the quick release lever, pull up or push down the
upper part of the adjustable stem to the right height, then fix the quick release into position.
You have now expanded your ESCOOTER ES9001 completely and it is now ready for use.
2. Folding
If you need to fold your electric scooter for convenient transporting or storage, please refer to
the following to fold the handlebar then the stem.
2.1 How to fold the handlebar?
Loosen the right-side handlebar sleeve by rotating it anticlockwise till it is completely loose,
then pull out the right-side handlebar and fold it.
Loosen the right-side handlebar sleeve by rotating it clockwise till it is completely loose and
then pull out the left side handlebar and fold it.
5
5
2.2 How to fold the stem?
To fold the stem when the handlebar is folded.
Firstly, release the safety buckle.
Secondly, press the folding lock with your thumb on one hand while pushing the stem ahead
with another hand, to unlock the folding mechanism, then put down the stem slowly and
softly till hearing a “clicking” sound. Now the stem is folded and locked, you can now carry it
with one or two hands.
To fold the stem when handlebar is unfolded.
Firstly, release the safety buckle.
Secondly, hold the grips with two hands.
Thirdly, press down the folding locking mechanism with your foot while pushing the
handlebar forward then push down the stem slowly and softly till hearing “clicking” sound.
Now the stem is folded and locked completely by the folding mechanism.
3 Functions and application
1. Lights
When the display is switched on press the light switch button to turn on the front and rear
lights, press again to turn off.
2. Brake
The ESCOOTER ES9001 has front and rear drum brakes as well as an electric brake
system.
Pull left side brake lever to activate the electric brake and rear drum brake.
Pull right side brake lever to activate the electric brake, as well as the rear wheel and front
wheel mechanical brakes.
6
6
3. Display
1. Power switch button 2. Mode button
There are two buttons on the display, a power button and mode button.
3.1 Usage of display
Press and hold the power switch button to power on the electric scooter, once switched on, the
screen of display will show speed mode (1, 2 or 3), battery capacity, constant speed, trip or
DOD（depending on the function chosen). Press and hold the power switch again to switch off
the electric scooter.
If there is no input signal received within 3 minutes after switching it on, the display will be
switched off automatically.
After each short press of the power switch button, the following modes will be displayed
TRIP, DOD, VOL (battery volume) and time will be shown in turn.
Long press mode button to clear data of TRIP
Short press mode button to change speed mode between 1, 2 and 3.
Speed mode 1 is slow speed, mode 2 is middle speed and mode 3 is fast speed.
Pull finger throttle on the display to start riding.
Power Switch
Button
Mode Button
Finger Throttle
7
7
3.2 Trouble shooting
When your ESCOOTER ES9001 malfunctions, the display will show a certain code number
to let you know which area is faulty or causing a problem. The following fault codes are
indicated.
Code
Problem part
Signal
1
Brake
2
Motor
3
Throttle
4
Controller
8
8
4 Charging
Power off the electric scooter before charging.
Open the cover of the charging port.
Plug the output end of the charger into that charge port, which is under the deck, located on
the front / left side of the battery case. Then plug the input end of the charger into the power
point and switch on the power point for charging.
Red light is on when charging, when battery is fully charged, green light turns on.
After charging is complete, unplug the charger from the wall socket first then unplug from the
charging port on the scooter and finally cover the charging port with the rubber plug.
Charging Port
Charger
9
9
5 Specifications
Overall dimension
Unfolded: 112*58*119 cm
Folded: 112*20*46 cm
Frame
Al alloy
Tire
pneumatic, 9 inches
Suspension
Front and rear suspension
Brake
front and rear drum brake + electric brake
Motor
36V 200W rear drive motor
Battery
36V 12.8Ah, LG lithium battery
Charger
42V 2A
Charging time
6-8 H
Display
LCD
Speed mode
3 modes 10, 15, 25 km/h
Max Speed
25 km / h
Lights
front and rear lights + side flashing lights
loading capacity
100 kgs
Range per charge
40 km, depending on loading capacity and terrain
condition
N.W./G. W
19.65 kgs / 22.15 kgs
Packing:
113*21*43 cm
Table des matières
Autres manuels Myride Scooter
Manuels Scooter populaires d'autres marques
First Choice Mobility
First Choice Mobility Roma Medical Corella S741 Manuel utilisateur
Carrera
Carrera impel Manuel utilisateur
Afikim
Afikim Superlight SL-3 Manuel utilisateur
CareCo
CareCo ZOOM Manuel utilisateur
Douglas
Douglas Vespa G.S. Manuel utilisateur
Gazelle
Gazelle with BOSCH System Manuel utilisateur