MuxLab 500831 Manuel utilisateur

HDMI 2.0/3G-SDI Signal Analyzer

Installation & Operation Manual

500831

HDMI 2.0/3G-SDI Signal Analyzer

Contents

1. Introduction............................................................................................................................................. 3

2. Package Contents .................................................................................................................................... 4

3. Product Panel Overview .......................................................................................................................... 5

3.1 Front panel ............................................................................................................................................ 5

3.2 Rear panel.............................................................................................................................................. 6

4. Features................................................................................................................................................... 6

5. Specifications........................................................................................................................................... 8

6. Applications............................................................................................................................................. 8

7. Operation Control & Functions .............................................................................................................10

8. USB Port Serial Driver Installation ......................................................................................................... 20

9. Cascading the Control Bus.....................................................................................................................21

10. Warranty ...........................................................................................................................................23

HDMI 2.0/3G-SDI Signal Analyzer

1. Introduction

HDMI 2.0/3G-SDI Signal Analyzer (500831) is an advanced

device for testing the latest HDMI®signal sources with HDMI

outputs from such devices as an HDMI®repeater, switcher,

splitter, matrix, media players, BD Player etc. It can analyze

and display HDMI®signals up to 4K 60Hz 4:4:4, as defined in

the HDMI®2.0 standard. The unit can also be used for SDI

signal analysis, including SD/HD/3G-SDI for Broadcast

applications.

When used together with the HDMI 2.0/3G-SDI Signal

Generator (500830), a useful set of cable tests can be

performed to check the HDMI cable quality and the

connectivity of signal lines. Such tests may be operated

from the HDMI 2.0/3G-SDI Signal Analyzer and the test result

will also be displayed on the HDMI 2.0/3G-SDI Signal

Analyzer.

Thanks to the product’s small size and low power

consumption, the unit is powered via an internal battery,

which can be charged from the included power supply. The

battery supports 5 hours of normal operation between

charges. This convenience permits the operator to run tests

HDMI 2.0/3G-SDI Signal Analyzer

in areas where AC power may not be easily accessible, and

allows for a device that is highly portable and can be easily

included in a video technician’s toolbox. The device is also

well suited for stationary laboratory environment

applications.

The integrated 3”(Inch) TFT LCD panel is very usefully for the

purpose of visual viewing of received HDMI®signal

contents.

In addition to viewing video signals, the OSD (on Screen

Display) feature on the LCD panel will overlay results of the

HDMI®source signal video analysis.

Free Windows based Control Software is available on the

MuxLab website for the purposes of expanding the devices

features and reach capabilities. The included USB cable will

allow the HDMI 2.0/3G-SDI Signal Analyzer to be easily

connected to a Windows based computer. The Control

Software will allow measurements of many Video

parameters, including bit-error.

2.Package Contents

1. Main unit: HDMI 2.0/3G-SDI Signal Analyzer

2. 5V 1A power supply

HDMI 2.0/3G-SDI Signal Analyzer

3. Wall-mounting bracket (x2)

4. 1.2m USB cable (x1)

5. Stick-on rubber feet (x4)

3. Product Panel Overview

3.1 Front panel

1. HDMI/SDI mode select button

2. HDMI or SDI mode LED Indicator

3. 3 inch LCD panel. The display shows actually signals

received on the HDMI input port, as well as to

control/navigation menus and device settings.

4. HDMI Sync Status LED. Shows the HDMI link status and is

lit when the link is active. The LED will be off when the link

is lost or the HPD is not present from the sink device. The

link will blink if an EDID error exists.

5. Convenient and ergonomic buttons for operating and

navigating menus and settings with Up, Down, Left, Right,

HDMI 2.0/3G-SDI Signal Analyzer

Enter (select) and Cancel buttons.

3.2 Rear panel

1. DB9 connector for RS232 control

2. DB9 connector for RS232 cascade, to other tester

3. USB port for control

4. SDI in

5. 3.5mm jack for 2CH analog audio out

6. HDMI in

7. 5V DC socket

8. Power switch

4. Features

Powerful and affordable testing solution AV R&D

engineers, integrators and installers

Supports 4Kx2K 24Hz/25Hz/30Hz/50Hz/60Hz and 3D,

4K 50/60Hz YUV420 is only used for HDMI®2.0

HDMI 2.0/3G-SDI Signal Analyzer

Support RGB4:4:4, YUV4:2:2, YUV4:2:0 and Deep-Color

Support SD/HD/3G-SDI

3 inch high resolution LCD panel for displaying input

video and OSD for Menu settings display

VU meter available on the LCD panel to help users see

the volume on each audio channel

HDMI cable test function can help users diagnose cable

problems when the HDMI link is problematic

Signal characteristics for actual audio present on the

3.5mm Audio-out socket is displayed on the OSD (Note

that analog audio is only available in PCM mode)

EDID can be managed by the Windows based Control

Software

The embedded software (firmware) includes 4 sets of

fixed EDID settings and 10 memory slots for 10 sets of user

defined EDID settings

HDMI receiver module can be powered up and

powered down in any order –to emulate an HDMI®sink

device power On/Off sequence

HDMI 2.0/3G-SDI Signal Analyzer

5. Specifications

HDMI Version

HDMI®2.0 / DVI

HDCP Support

Yes

HDCP Version

HDCP2.2/HDCP1.4

HDMI Video Bandwidth

Up to 18.0GHz (6.0GHz per channel)

SDI version

SD-SDI/ HD-SDI/ 3G-SDI

Color Depth

24bits, 30bits, 36 bits, 48bits

Color Space

RGB444, YUV444,YUV422, YUV420 (HDMI2.0 only)

Audio Bits

26bits, 20bits, 24bits

Audio Sample Rate

32K, 44K, 48K, 88K, 96K,176K,192K

Vertical Frequency Range

≤ 120 Hz

Power Consumption (max.)

2 Watts

Housing

Metal

Dimension (mm)

170mm x 109mm x 50mm

Weight (g)

930g

6.Applications

The HDMI 2.0/3G-SDI Signal Analyzer is an SDI receiver or

HDMI®sink emulator that can be used to test SDI or HDMI

Sources, such as Media Players, BD players, Matrix Switches,

Switchers, Splitters, Repeaters, and numerous other HDMI

devices for proper functionality.

HDMI 2.0/3G-SDI Signal Analyzer

The HDMI 2.0/3G-SDI Signal Analyzer (500831) also works with

the HDMI 2.0/3G-SDI Signal Generator (500830), which is

practical when testing devices placed between source and

sink equipment, such a matrix switches, switchers and

splitters as shown below. This device pairing creates a

flexible and powerful UHD test system. The test systems can

be controlled via a single RS232 control port, due to the fact

that the RS232 signal can cascaded (daisy chained) across

multiple testing devices (500830 & 500831 devices).

The combination of the HDMI 2.0/3G-SDI Signal Generator

(500830) and HDMI 2.0/3G-SDI Signal Analyzer (500831)

provides the user with a sophisticated low cost UHD

troubleshooting testing system. The setup can be used to

analyze bit error levels, and for long term “Time /Event

based sampling” tests that are extremely difficult to do by

individual technician alone.

HDMI 2.0/3G-SDI Signal Analyzer

The HDMI 2.0/3G-SDI Signal Analyzer offers sophisticated

functionality in a compact size, making it a valuable tool for

AV professionals.

7. Operation Control & Functions

1. Connect an HDMI cable to the HDMI®source device.

2. If needed, connect the PC RS232 to the phoenix

socket or use a USB cable to connect to the HDMI

2.0/3G-SDI Signal Analyzer via USB port for controlling

the Analyzer.

3. The Signal Analyzer can be run on the internal battery, or

can be run via an external power source, such as from

the included power supply by connecting the power

supply to the Signal Analyzer power socket.

Table des matières

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur