Operating Manual
MSBA00049
Date: 21.03.2019
Rev.: 05
Page 5 of 14
Mütec Instruments GmbH Tel.: +49 (0) 4185-80 83-0 E-Mail: muetec@muetec.de
Bei den Kämpen 26 Fax: +49 (0) 4185-80 83-80 Web: www.muetec.de
D-21220 Seevetal-Ramelsloh
2General Instructions
This device left the plant in flawless condition in terms of its safety features. To preserve
this condition and ensure safe operation of the device, the user has to observe the
instructions and warning notes indicated in this operating manual.
NOTE
For the sake of clarity the manual does not contain complete detailed information on all
product types and can therefore not take into account every conceivable case with
respect to installation, operation and maintenance.
Should you wish further information or should special problems arise that are not treated
in sufficient detail in the manual, you can obtain the necessary information by telephone.
Moreover, we point out that the content of the manual shall not constitute part of or
amend a previous or existing contract, agreement or legal relationship. All obligations of
Mütec Instruments GmbH shall result from the respective contract of purchase, which
also contains the complete and solely valid warranty terms. These contractual warranty
terms shall neither be extended nor limited by the information contained in the manual.
The content reflects the technical state of the art regarding printing. It is subject to
technical modifications in the course of further development.
DISCLAIMER
All modifications to the device fall within the responsibility of the user unless expressly
specified otherwise in the operating manual.
QUALIFIED PERSONNEL
are persons who are familiar with installation, assembly, repair and operation of the
product and have the qualifications necessary for their work, such as:
•Training, instruction and/or authorization to operate and maintain
equipment/systems in accordance with the standards of safety technology for
electrical circuits, high pressures and corrosive as well as hazardous media.
•In the case of equipment with explosion protection: training, instruction and/or
authorization to perform work on electrical circuits for potentially explosive
equipment.
•Training or instruction in accordance with the standards of safety technology
regarding care and use of appropriate safety equipment.
CAUTION
Potentially electrostatic components may be destroyed by voltage that is far below the
limits of human perception. Such voltage occurs even when you touch a component or
electrical connections of a component and are not electrostatically discharged. The
damage that occurs to a component because of overvoltage usually cannot be detected
immediately and does not become noticeable until after a longer operating period.
