MURO VISLIDER CH7280 Manuel utilisateur
Model：CH7280SU／CH7280LU
Instruction manual (with warranty card)
◆Safety precautions◆
WARNING
Denotes risk of personal injury, loss of life or damage to the tool
In case of failure to follow instructions in this manual.
①Read instructions carefully prior to operating power tool . Read and unders tand all section in the
instruction manual
②Be sure to wear protective goggles and dust-proof mask while operating tool
③Depending on the work environment, ear p lugs, hardhat, safety shoes, and other personal protective
equipment may be required
④Use only specified Adaptor Kit recommended by Muro for your screwdriver model.
⑤Use only specified "VISROPE STRIPS" collated screws
⑥Do not overreach, ensure proper footing and balance to have control of power tools
⑦Wear proper clothing, avoid loose clothes, jewelry or any accessories that may catch onto tool
⑧Keep workplace clean, tidy and well lit to prevent accident
⑨Do not direct power tool towards anybody at all time
⑩Do not place hands, feet and/or head close to the tip (screw outlet) of the tool while operating
⑪Do not operate tools under influence of drugs, alcohol or any medication to prevent serious injury
⑫Do not use power tools near volatile, flammable substances such as gasoline, thinner, gas, paint, and
adhesive to prevent catching fire or explosion
⑬Do not expose power tool under rain or wet condition to prevent risk of electric shock
⑭Store power tools, accessories and consumable parts outreach of children and untrained personnel
⑮Grounded tools must be plugged into outlet properly installed accordance with all codes and ordinance
⑯Handle power tools with care. Dropping or hitting may result in tool malfunction
⑰Keep these instructions in a safe place for future references
⑱DO NOT TOUCH ANY METAL PART OF THE TOOLwhen driving into walls, floor etc where live electrical
wires may be encountered
⑲When operating power tool outdoor, use extension cord marked“W”or “WA”to reduce risk of electric
shock.
⑳Do not use tool if switch malfunction(on/off) or any misalignment in the tool
◆Specifications◆
Model
CH7280SJ
CH7280LJ
Length (without accessories)
Approx. 8-3/4”
Approx. 9-1/4”
Weight (without accessories)
Approx. ＊＊＊ Ibs
Approx. ＊＊＊ Ibs
Applicable
screw
Screw Diameter
#10 to #12
#10 to #12
Screw Length
5/8”to 3/4”
1”to 1-1/2”
Screw Head
HEX（Partially, specified washer available）、FLAT HEAD
（Partially, specified washer available）、WAFER、THIN
WASHER HEAD
CH7200
Attachment
CH7280
◆Maintenance and inspection◆
1. After each use, be sure to clean up power tool. Powder plaster, dust and dirt stuck on the tool may cause trouble
or issue for next operation
2. To wipe and clean power tool, use dry cloth or neutral deterg ent-soaked cloth. Do not use gasoline, thinner or
similar solution to prevent damage in the power tool. Never wash power tool with water to avoid any rust or tool
malfunction
3. The bit of the adaptor kit is consumable parts. If the bit on both ends have worn out, immediately replace with a
new one. ※Worn-out bit may cause poor tightening or damage to the screw head.
4. Store power tool in a dry, cool place. Keep it outreach of children and untrained personnel. Place tool on a flat
spot to prevent any falling damage
5. Do not disassemble and repair the power tool yourself. For repairs, contact your dealer.
VISLIDER Auto Feed Screwdriving Attachment
Product Registration: Online OR Mail-in Warranty Card to Service Centre
●This is your Muro product registration card. Proper registration may serve as proof of purchase in case original receipt is lost
or misplaced. Please fill out registration card and return by mail OR register online at www.muro.com. Muro North
America Inc. provide a 6 months warranty after the date of purchaseby the end-user against defective workmanship or material.
This warranty does not cover defects or damage due to misuse, abuse, or normal wear and tear. Warranty is voidif any screws
other than VISROPE (Muro collated screw) are used . For any issue or trouble arise, p roduct must be returned to p lace of
purchase. Detailed warranty information printed on last page of this booklet.
●IN NO EVENT SHALL MURO BE RESPONSIBLE FOR ANY DIRECT, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES, EVEN IF MURO IS INFORMED
ABOUT THEIR POSSIBLE EXISTENCE, INCLUDING ANY LOSS OR DAMAGE ARISING OUT OF, CONNECTED WITH, OR RESULTING FROM THE
MANUFACTURE, SALE, DELIVERY, RESALE, REPAIR, REPLACEMENT, USE, MISUSE, OR PERFORMANCE OF ANY PRODUCT
●SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THAT THE ABOVE MAY NOT
APPLY TO YOU
●THE LAW OF SOME JURISDICTIONS LIMIT OR DO NOT ALLOW THE DISCLAIMER OF CONSEQUENTIAL DAMAGES. IF THE LAWS OF SUCH
JURISDICTION APPLY TO ANY CLAIM BY OR AGAINST THE SELLER, THE LIMITATION AND DISCLAIMERS CONTAINED HERE SHALL BE TO THE
GREATEST EXTENT PERMITTED BY LAW
CH7280
Attachment
Warranty Card
Model
CH7280SJ
CH7280LJ
Warranty period
6 months after date of purchase
Date of purchase
Serial Number
Customer
Name
Phone
Address
Dealer
Name
Phone
Address
Please go to the Muro website to Register your Purchase
(Please Note: Warranty is voided on products not registered)
www.muro.com/customer_service/product_registration/
Ce manuel convient aux modèles suivants
2
Table des matières
