mumbi m-AZ3500 Manuel utilisateur
User manual
Outdoor time switch
Scope of supply
• Time switch
• User manual
Specications
input voltage: 230V~50Hz
max. Power: 16(2)A, 3500W
features: 24-hours time switch
General information
To ensure that you can enjoy this product for many years to come, please read this
manual and store it in a safe place. With this time switch, you can conveniently and
easily control electric devices that are to be activated at a certain time or over a
longer time period.
Commissioning
1. Remove the product from the packaging and remove any remaining packaging
material.
2. Use the blue pins to set the desired time period.
3. Slowly turn the turntable clockwise to set the current time.
4. Connect the time switch to the desired socket. Make sure that the voltage corres-
ponds to the specications of the time switch.
5. The time switch is operational, you can now connect the device that is to be
controlled.
Settings
The time switch allows you to specify one or more time periods for which the
connected decive will be supplied with power. Set the time by pressing all the outer
pins within the desired time period. One pin corresponds to 15 minutes each. For
example, if the timer is to be activated 2 hours a day, a total of 8 pins have to be
pressed.
Set the time using the turntable afterwards. Turn it clockwise, until the arrow points
to the current time. One line corresponds to 15 minutes each, so one hour is divided
into four areas. For example, to set a time of 13:30, the turntable should be rotated
to the second line after the 13.
Maintenance
The device is maintenance-free, so please do not open the device. You will invali-
date your warranty if you open up the device. Clean the outside with a soft, dry
cloth or a brush.
Do not use any cleaning products that contain carbonic acid, benzene, alcohol or
similar substances. Such substances attack the surface of the device and their
vapours are also hazardous to health and explosive. Do not use any sharp-edged
tools, screwdrivers, wire brushes or similar to clean the device.
Safety and maintenance instructions
• Make sure that all electrical connections, such as cable connections, comply with
to the relevant policies.
1
Imported for Claus GmbH, Sigsfeldstraße 4, 45141 Essen, Deutschland,
www.mumbi.de
This product complies with the standards: ITEM #24707
EN 60730-2-7: 2010, EN 60730-1:20011
DIN VDE 0620-1: 2016, DIN VDE 0620-2-1:2016+EK1 510-11:2011
EN 60730-1: 2000 + A12: 2003 + A1: 2004 + A13: 2004 + A14:
2005 + A16: 2007 + A2: 2008,
EN 60730-2-7: 2010
WEEE-Reg.-Nr.: 83627387
• Attention! Do not overload power outlets and extensions, this can cause re or
an electric strike.
• If you are facing any trouble with using the device, or if you have any safety
issues, please contact an expert.
• Keep out of the reach of children.
• Avoid hard impacts, this can lead to damaging the electronic circuits.
• Never replace damaged power leads yourself! Please remove the devices from
the mains and contact a specialist company/dealer.
• Opening and repairing the device must be performed only by an authorized
specialist.
• Wireless systems could be aected by phones, microwaves and other electro-
nic devices that are operating within the 433.92 MHz eld. Keep a minimum di-
stance of at least 3 meters during the installation and operation of the device.
Protecting the environment
At the end of its service life, this product must not be disposed of with the normal
domestic waste. It must be taken to an assembly point for the recycling of
electrical and electronic devices. This is indicated by the symbol on the product,
the instruc-
tion manual and packaging. The materials and substances can be recycled accor-
ding to their marking.
The reutilisation of recycled substances or other forms or recycling of old devices
signicantly helps the environment. Please contact your local authority for informa-
tion regarding the relevant disposal points.
2
Discover our complete assortment now on
www.mumbi.de
Table des matières
Autres manuels mumbi Changer
