USER MANUAL
Intended use
mVisor 7001 is a protective face shield that offers approved protection
against droplets and liquid splashes. It should be used in environments
where the user is exposed to liquid splashes and/or droplets.
The product should only be used in accordance with this user manual.
After assembling (see front) mVisor 7001
PUT ON THE FACE SHIELD Wear plastic gloves. Place the head strap over
and around your head and adjust until it fi ts the contours of your head.
Important: Always check that mVisor 7001 is securely in place before
starting the work.
REMOVE THE FACE SHIELD For a safe removal of the face shield without
infecting hands or face: Put on plastic gloves. Hold the buckle at the
back of your head, pull out gently and remove the face shield by pulling
it forward. Avoid touching the front of the face shield. Clean the face
shield according to the instructions.
Care and cleaning
1. Disinfect your hands with hand sanitizer
2. Put on protective gloves
3. Disinfect and clean the shield and head strap with soap and
water or surface disinfectant
4. Hang up or put the face shield in a place where it can dry,
or wipe with a surgically clean disposable wipe
5. When dry and disinfected, store the face shield in a clean
plastic bag or original packaging before reuse
This product has been
manufactured in compliance
with Regulation (EU) 2016/425,
the applicable requirements of
standard EN 166:2001, certifi cate
No. 20/3121/00/0161 issued by
AITEX, Plaza Emilio Sala No. 1, Alcoi,
Spain, Notifi ed Body 0161.
User manual v1.1
Technical specifi cation
Lens Adjustable head strap Foam
Thickness: 1,8 mm Thickness: 1,2 mm Thickness: 30 mm
Length: adjustable 219 mm Width: 25 mm Width: 30 mm
Weight: 146 gr Weight: 24,2 gr Length: 200-330 mm
Material: polycarbonate, PC Material: polypropylene, PP Weight: 6,2 gr
Material: BPI PolyEther+PolyEster
mVisor 7001 can be used for as long as the shield provides good visibility and is undamaged.
Regularly check that the head strap and lens are free from cracks.
Contact
mShield | Anders Anderssons väg 12, 285 35 | Markaryd, Sverige | info@mshield.se | +46 433 128 45
Documentation available for download
Please visit: mshield.se/docs
