MRV Communications Fiber Driver EM316LX Manuel utilisateur

EM316LX

Console Server Module

User’s Guide

451-0330F

2451-0330

MRV Communications, Inc. The information in this document is subject to change without notice and

should not be construed as a commitment by MRV Communications, Inc. MRV Communications, Inc.

reserves the right to revise this publication, and to make changes in content from time to time,

without obligation to provide notification of such revision or changes. MRV Communications, Inc.

assumes no responsibility for errors that may appear in this document.

Should you experience trouble with this equipment, please contact one of the following

support locations:

•If you purchased your equipment in the Americas, contact MRV Americas

Service and Support in the U.S. at 978-952-4888. (If you are calling from outside the

U.S., call +001 978-952-4888.)

•If you purchased your equipment outside the Americas (Europe, EU, Middle-East,

Africa, Asia), contact MRV International Service and Support at (49) 6105/2070.

NOTE: The EM316LX is based on an LX-Series device. Therefore, this document refers to the

documentation set for the LX.

451-0330 3

FCC Notice

BSMI Notice

CAUTION

This equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful

interference when the equipment is operated in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, can

cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of

the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the power cord of the equipment into an outlet on a circuit

that is different from that to which the receiver is connected.

• Consult the dealer or experienced radio/TV technician for help.

Changes or modifications not expressly approved by MRV

Communications, Inc. could void the user's authority to operate the

equipment.

4451-0330

VCCI Notice

This is a Class A product based on the standard of the Voluntary Control Council for

Interference by Information Technology Equipment (VCCI). If this equipment is used in a

domestic environment, radio disturbance may arise. When such trouble occurs, the user may

be required to take corrective actions.

EXPORT NOTICE

MRV models contain 128-bit encryption software. Export of this product is restricted under

U.S. law. Information is available from the U.S. Department of Commerce, Bureau of Export

Administration at www.bxa.doc.gov.

451-0330 5

Table of Contents

Preface ................................................................................................................................... 13

Customer Support.............................................................................................................................13

Other Documentation .......................................................................................................................14

Overview of the EM316LX .................................................................................................... 15

Conventions.......................................................................................................................................15

System Specifications .......................................................................................................................17

Installing the EM316LX......................................................................................................... 19

Hardware Installation ......................................................................................................................19

Unpack and Inspect the Unit..................................................................................................... 19

Package Contents ....................................................................................................................... 19

EM316LX Indicators and Interfaces................................................................................................20

Front Panel LEDs....................................................................................................................... 20

Environmental and Installation Considerations ............................................................................21

General Installation..........................................................................................................................21

Follow all Safety Regulations .................................................................................................... 21

Unpacking the Unit .................................................................................................................... 22

Determine the Best Location for the Chassis ........................................................................... 22

General Precautions ................................................................................................................... 22

Plug in the Chassis ..................................................................................................................... 22

Unit Installation ...............................................................................................................................23

Cable Connections ............................................................................................................................24

Connecting the Ethernet Interface ............................................................................................ 24

Connect Serial Device Cables .................................................................................................... 24

Connecting Your Management Station ..................................................................................... 25

Modem Port (Optional) .....................................................................................................................25

Powering On......................................................................................................................................25

System Login and Passwords...........................................................................................................26

Configuring the EM316LX for the First Time...................................................................... 27

Configuring the EM316LX Unit for the First Time From the LX DIAG Port...............................27

First Time Quick Configuration ................................................................................................ 27

Assigning an IP Address via the Network ................................................................................ 29

Manually Setting the IP Address Via the CLI ................................................................................30

Assigning an IP Address for Booting/Runtime From the EM316NM Module ..............................31

Setting Your ppciboot IP Address for Booting From Network ................................................. 31

Assigning a Runtime .................................................................................................................. 33

Accessing and Configuring the Graphical User Interface (GUI) ...................................................33

Configure Mode........................................................................................................................... 37

Menu Mode.................................................................................................................................. 38

Software Upgrades ...........................................................................................................................39

6451-0330

IP Configuration Menu.....................................................................................................................39

Booting from Defaults.......................................................................................................................39

Accessing and Configuring Additional Features.............................................................................39

Connecting to the EM316LX via Telnet or SSH ....................................................................... 39

Accessing from a Terminal Attached to an EM316LX Serial Port .......................................... 40

Additional Considerations................................................................................................................40

Command Line Interface (CLI) Tree Structure ..............................................................................41

Additional Considerations for an Internet Environment ...............................................................42

Autobauding Feature........................................................................................................................42

Reinitializing/Powering Off the Unit...............................................................................................42

Alternative Port Capabilities ................................................................................................ 43

Sensor (Temperature/Humidity) Ports ............................................................................................43

Connecting the Temperature/Humidity Sensor........................................................................ 43

IR-5150 Power Strip Management ..................................................................................................44

Connecting the IR-5150.............................................................................................................. 45

IR-4800 Power Strip Management ..................................................................................................46

Connecting the IR-4800.............................................................................................................. 46

Using LX Ports as Alarm Inputs and Control Outputs ..................................................................47

Alarm Inputs Setup and Usage ................................................................................................. 48

Control Output Setup and Usage .............................................................................................. 49

Appendix A - Technical Specifications............................................................................... 51

Appendix B - Factory Defaults............................................................................................. 53

ppciboot Factory Default Settings....................................................................................................54

Appendix C - POST Test Error Codes................................................................................. 55

Error Code Definitions......................................................................................................................55

Appendix D - Cabling the EM316LX .................................................................................... 57

Cabling Considerations ....................................................................................................................57

Serial Device Connectors............................................................................................................ 57

Diagnostic Port Connector (Port 0)............................................................................................ 57

10/100 Connector ........................................................................................................................ 58

Ordering Cables .......................................................................................................................... 58

Modular Adapters .............................................................................................................................58

Pin Assignments ......................................................................................................................... 58

Connecting to the Diagnostic Port (Port 0)......................................................................................60

Modem Control/Hardware Flow Control .........................................................................................60

RJ-45 Wiring Considerations ...........................................................................................................61

Modular Adapters (RJ-45 to DB-25) ................................................................................................61

MRV Communications 8-Wire Cabling ...........................................................................................64

451-0330 7

Appendix E - Customer Support ......................................................................................... 67

Contact Information .........................................................................................................................67

Americas Support ....................................................................................................................... 67

International Field Offices ......................................................................................................... 67

International Support................................................................................................................. 69

Manual Information .........................................................................................................................70

Glossary.............................................................................................................................................70

Ordering Information .......................................................................................................................70

8451-0330

451-0330 9

Figures

LX-Series EM316LX1 (1 Port) Front Panel (w/Modem) ........................................................... 20

LX-Series EM316LX2 (2 Port) Front Panel............................................................................... 20

Remove the Required Number of Blank Panels. ....................................................................... 23

Align the Edges of the EM316 to the Rail Inside the Chassis and Then Insert the Unit....... 23

Basic Menu Structure ................................................................................................................. 41

Connecting the Temperature/Humidity Sensor ........................................................................ 44

Connecting the IR-5150 .............................................................................................................. 45

Connecting the IR-4800 .............................................................................................................. 46

Typical Alarm Inputs Connections ............................................................................................ 48

Typical Interface Design for Control Output Signals ............................................................... 50

Serial Device Connector (RJ-45) Signal Assignments .............................................................. 57

10/100 Connector Assignments .................................................................................................. 58

DB-25 Pins................................................................................................................................... 60

Adapter Wiring, EM316LX Series to DTE ................................................................................ 61

Adapter Wiring, RJ-45 to DB-9, EM316LX Series to DTE....................................................... 62

Adapter Wiring, EM316LX Series to DCE ................................................................................ 63

Modular Cables for RTS/CTS Flow Control (Eight-Wire), Concurrent with Modem Control Sig-

nalling.......................................................................................................................................... 65

10 451-0330

Table des matières

Autres manuels MRV Communications Matériel réseau

MRV Communications

MRV Communications EM316LNXNM-OT Manuel utilisateur

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur