MRC ROVA-100S Manuel utilisateur
LED Digital Rotary Evaporator
Operation Instructions
ROVA-100S LED Digital Rotary Evaporator
Please carefully read the Instructions, and use
the product safely under the direction of the
Instructions.
If any information of shapes and performance
indicators changes, we will not notify this
otherwise.
MRC. 1.23
Disclaimer
•The intellectual property right on the manual belongs to MRC Laboratory
Instruments Limited (hereinafter referred to as “the Company”), i.e. relevant
copyright belongs to the company.
•Products of the company are under the patent protection countries and
regions (including obtained patents and patents being applied for).
•We elaborately prepared the manual in the attitude of being responsible for
the users. But we can’t guarantee that the contents of the manual are fully
correct. If any occasional or subsequent loss is caused by the use of the
Manual, the company will not be liable for this at all.
•The manual is a pure technical document, free of any implication or oblique
hint of any third party. Moreover, we won’t be liable for any user’s
misunderstanding upon the printer’s error(s).
•The company and any of the company’s employees will not bear any liability
for direct/indirect loss of information or stop of business (if any) caused by the
information of the manual or the product it mentions.
•The company reserves the right to change specification & price of the product.
•If any information of the manual changes, we will not notify this otherwise.
•The manual and any content of it must not be copied, abstracted or modified
in any form without the company’s written approval in advance.
Contents
Introduction........................................................................................................... 1
How to acquire help .............................................................................................. 1
Warranty ............................................................................................................... 1
1.Safety notes....................................................................................................... 2
2.Scope of application .......................................................................................... 8
3.Inspection .......................................................................................................... 9
3.1 Open-package inspection.......................................................................... 9
3.2 Package list ............................................................................................. 10
4.Control and display .......................................................................................... 11
4.1 Control..................................................................................................... 11
4.2 Display .................................................................................................... 15
5.Installation and testing ..................................................................................... 17
5.1 Installation ............................................................................................... 17
5.2 Testing ..................................................................................................... 21
6.Fault diagnosis ................................................................................................ 23
7.Maintenance and cleaning ............................................................................... 24
8.Relevant standards.......................................................................................... 26
9.Technical parameters....................................................................................... 27
1
Introduction
Welcome to use the Operating Instructions of Rotary Evaporator. Users are advised
to read carefully this manual before using this instrument, operate the instrument
according to the instructions contained herein and be aware of all precautions.
How to acquire help
If you encounter any problems or need help while installing or using this instrument,
please immediately contact the After-sales Service Department of the manufacturer
/ supplier.
Please prepare the following information and materials:
•Product serial number (on the instrument nameplate)
•Warranty card
•Description of problem phenomenon
•The method and operating steps you have undertaken to resolve the problem
•Your contact details including telephone number, fax number and email address.
Warranty
According to the manufacturer’s warranty clause, the warranty period of the product
is 24 months (since the purchase date) provided that it is used by the normal
operation method under the normal service conditions specified in the Manual. This
2
warranty does not cover any performance degradation of or damage to the
instrument due to incorrect installation or operation, unauthorized disassembly or
repair or any other violations of the operating instructions contained herein. If any
related problem described in the terms of warranty occurs, please contact the
manufacturer / supplier.
1.Safety notes
•Please carefully read the Manual before operating the product, and observe
the specifications on safe operation.
•Please properly keep the operating instructions for easy reference in case of
need.
•Please ensure only suitably trained personnel can operate this instrument.
•Please comply with the safety rules, personal safety and accident prevention
norms, especially when creating vacuum!
•According to the type of medium handled, please wear suitable protective
devices when operating the instrument; otherwise, the following dangers may
occur:
3
-Splatter of liquids
-Fly-out of parts
-Contamination of human body, hair or clothes by splattered substances
•Warning! Inhale of contact with toxic liquids, gases, spatters, vapor, dust,
biological or microbiological medium might cause damage to the operator.
•Place the instrument on a stable, clean, antiskid, dry & fireproof table surface.
•Make sure there is sufficient space above the instrument and the glass
assembly might exceed the height of the instrument.
•Before use, please carefully examine the instrument and accessories
especially the glass assembly for any damage. Please do not use any
damaged parts.
•Ensure the glass assembly is free of stress! Each of the following reasons
might result in damage to the glass assembly:
-Stress due to incorrect installation
-Effect of external mechanical force
-Sharp change to the ambient temperature
•Ensure the instrument will not move due to vibration when turning on the
instrument.
4
•Note the danger caused by the following circumstances:
- Flammable substance
- Flammable low-boiling-point medium
- Breakage of glass component
•Warning! Never distill or heat any substance whose ignition point is lower than
the temperature set for the safety of the heating bath.
•The heating bath’s safety temperature shall at least 25 °C lower than the
ignition point of the medium being handled.
•Please don’t operate or use this instrument in an explosive environment or
underwater or use this instrument to handle any dangerous substance.
•This instrument is only suitable for the medium that does not react with the
energy generated in the handling process in a way that might cause danger.
Meanwhile, the substance being handled may not produce danger due to
energy generated in any other manner such as illumination reaction.
•The instrument must be monitored all the time when operating the instrument.
•Please don’t operate this instrument under overpressure.
•To ensure the effective condensation of the motor system, please do not block
the vent of the motor system.
5
•Only use of the accessories in the list of “optional accessories” can guarantee
the operational safety.
•Please refer to the operating instructions for heating kettle.
•Please refer to the operating instructions for optional accessories.
•Please use this instrument in a closed fume hood or other suitable protective
device.
•Select the distilling device according to the amount to be distilled and the
distillation type. The condenser must work normally. Please monitor the flow
rate of the coolant at the outlet of the cooler.
•To prevent pressure buildup, the glass assembly shall be kept vented when
operating under normal pressure, such as keeping the condenser open.
•Please note that gases, vapor or other substances can pose danger through
overflow from the upper opening of the condensation tube. To minimize or
avoid such danger, please take suitable measures, such as connecting the
cooling tube and scrubbing bottle or other effective extraction devices
downwards.
•The glass evaporating flask may not be heated on one side. The rotating
evaporating flask must rotate at the heating phase.
6
•The glass assembly’ design pressure tolerance is 10mbar. The venting valve
(see the part of “Testing”) must be opened before heating and once again after
cooling. When performing vacuum distillation, the steam must be condensed
before release or released safely.
If the residue after distillation is likely to be decomposed when exposed to
oxygen, please add only gas for stress release into it.
•Warning! Please be careful be avoid the formation of peroxides, as the
decomposition of peroxides accumulated in the distillation process might result
in explosion.
Please protect any liquid forming peroxides from ray of light, especially
ultraviolet irradiation. Please be careful to examine formation of any peroxides
before distillation and to remove the peroxides if any. Many organics are easy
to form peroxides, such as methoxypyridine, diethyl ether, dioxane,
tetrahydrofuran, unsaturated hydrocarbostyril, such as tetrahydronaphthalene,
diene, isopropylbenzene, ketone and solutions of the aforesaid substances.
•Warning! The heating bath, heating medium, evaporating flask and glass
assembly might become hot in the operation process and remain hot for a
while after stop of the operation! Before further operation, please let each part
Table des matières
Autres manuels MRC Équipement de laboratoire
MRC
MRC AM-4214SD Manuel utilisateur
MRC
MRC S2D-300 Manuel utilisateur
MRC
MRC MHK 1-6D Manuel utilisateur
MRC
MRC INE-112N-GC Manuel utilisateur
MRC
MRC WBL-100 Manuel utilisateur
MRC
MRC HCEN-24 Manuel utilisateur
MRC
MRC PGI-550H Manuel utilisateur
MRC
MRC MDCEN-302-SMD Manuel utilisateur
MRC
MRC Mini Roller ROL-01U Manuel utilisateur
MRC
MRC MH-4D Manuel utilisateur
MRC
MRC WBH-060N Manuel utilisateur
MRC
MRC UT-FLU1 Series Manuel utilisateur
MRC
MRC WBL-MINI Manuel utilisateur
MRC
MRC 1425 Manuel utilisateur
MRC
MRC RG-12-RM Manuel utilisateur
MRC
MRC WBH-100 Manuel utilisateur
MRC
MRC STE-V60 Manuel utilisateur
MRC
MRC WBT-200 Manuel utilisateur
MRC
MRC FDL-18N-70 Series Manuel utilisateur
MRC
MRC FH-12-DB Manuel utilisateur
Manuels Équipement de laboratoire populaires d'autres marques
Agilent Technologies
Agilent Technologies 5800 ICP-OES Manuel utilisateur
Endress+Hauser
Endress+Hauser Cleanfit CPA875 Manuel utilisateur
NI
NI PXI-5422 Manuel
Collomix
Collomix Aqix Manuel utilisateur
SPEX SamplePrep
SPEX SamplePrep 6875 Freezer/Mill Series Manuel utilisateur
Ocean Insight
Ocean Insight FLAME-NIR+ Manuel utilisateur
