Mounting Dream MD2198 Manuel utilisateur

MD2198 INSTALLATION INSTRUCTION

If you have any questions, please contact us via customerservice@mountingdream.com

or call us at telephone (626) 604-9048 (USA) Mon - Fri 10am - 6pm (Pacific time).

For more information,please visit our website:www.mountingdreamonline.com

42"~70" Max:600x400mm/24x16"

Min:200x200mm/8x8"

Für die Installationsanweisungen auf deutsch, Siehe Seite 11~12.

Pour l'instruction en français, veuillez vous reporter à la page 13~14.

Para las instrucciones de la instalación en español, favor vea la página 15~16.

Per le Istruzioni in italiano, vedi pagina 17~18.

x3 x1 x1

1 2

(A1)

Before getting started, let’s make sure this mount is perfect for you!

1 Is your TV VESA

equal to/greater than

200x200mm/8x8" and

equal to/less than

600x400mm/24x16"?

2 Does your TV

(including accessories)

weigh less than

100 LBS (45.5 kg)?

4 Installation Tools

(Not lncluded)

Yes --- Perfect!

No --- This mount is NOT compatible.

MAX:600mm/24"

MAX:

400mm/16"

Yes --- Perfect!

No --- This mount is NOT compatible.

CAUTION:

Drywall with

wood studs?

Band Tape

2M2M

5 Safety Caution

Please read this instruction carefully before installation.

If you do not understand these instructions or have doubts about the safety of the

installation, assembly or use of this product, contact Customer Service via

customerservice@mountingdream.com or call us at telephone (626) 604-9048 (USA)

Mon - Fri 10am - 6pm (Pacific Time).

● This product is designed for use in wood stud and solid concrete wall.

- DO NOT install into drywall alone.

● The wall must be capable of supporting five times the weight of the TV and mount

combined.

● Do not apply this product to any purpose not indicated by Mounting Dream.

● Incorrect installation may result in product damage or body injury. Mounting Dream shall

bear no responsibility for any damage or injury resulted from incorrect installation,

incorrect assembly or misuse.

Solid concrete

wall?

Pencil Screwdriver Electrodrill Socket Wrench

1/2"(13mm)

Stud Finder Awl 7/32"(5.5mm)

Wood Drill Bit

3/8"(10mm)

Masonry Drill Bit Hammer

3 What is your wall

made of?

Parts and Hardware

WARNING:This product contains small items that could be a choking hazard if

swallowed. Before starting assembly, verify all parts are included and undamaged. For parts

shortage or damage, please contact us via customerservice@mountingdream.com.

NOTE: Not all hardware included will be used.

TV Brackets

1-1 Select TV Screws

TV back

Bracket Washer

Bracket

Long Screw

Spacer

No, go to PAGE 3 for detailed combination.

Yes, go to PAGE 3 for detailed combination.

TV back

1-2 Need Spacer?

Short Screw

Washer

M4x12mm

M6x12mm

M8x25mm

M4x30mm

M6x35mm

M8x50mm

M6x17mm M8x22mm

M4 M6

10mm 2.5mm

Washers

Spacers

TV Screws

x4 x4

x4 x8

Tips: If you need to combine M6(e) or M8(c/f) screw with 2.5mm spacer(j), you have to

remove the inner circle.

1-3 Attach the TV Brackets

Screw and washer

Spacer(s), screw and washer

No!

For wood stud installation, follow STEP 2A

For concrete installation, follow STEP 2B on PAGE 6

<16mm

(5/8") Max.

24"(610mm)

Min. Wood Stud Size:

nominal 2"(51mm)

actual 1 1/2"(38mm)

Min. Wood Stud Size:

nominal 4"(102mm)

actual 3 1/2"(89mm)

Parts and Hardware

M8 Washer

Wood Stud Installation

Centre line

Mon - Fri 10am - 6pm (Pacific Time) or email us by

customerservice@mountingdream.com to have

these additional pieces shipped directly to you.

Concrete Wall Anchor

4pcs

Mounting Template

M6x12 Bolt

(Pre-assembled)

Wall Plate

Unit

Allen Key

M5x12mm Bolt

Tube Clip

Lag Bolt M8x60mm

16"/18"/24"

(406/457/610mm)

2.5"(64mm)

Go to Step 3 on PAGE 7.

Centre line

Again, find another wood stud

CAUTION: To avoid potential personal injury or property damage:

All 4 lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate

assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to

the next step.

To prevent the TV falling down, the Bolt Head Must Keep UP at this step!!

Bubble level

Stick

7/32"

(5.5mm)

No!

Bolt Head UP!

Solid Conrete Wall Installation

DANGER

2.5"

(64mm)

Concrete Wall

Anchor

Min.

8"(203mm)

CAUTION: To avoid potential personal injury or property damage:

All 4 lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate

assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to

the next step.

To prevent the TV falling down, the Bolt Head Must Keep UP at this step!!

Stick

3/8"

(10mm)

No!

Bolt Head UP!

100 LBS (45.5 kg)

Before hanging TV, please conduct "wall plate installation integrity test" first.

1 2

Handle

② Pull out and hold the handle.

③ Turn the handle in the opposite direction.

④ Push and release the handle.

⑤ Turn handle again to tighten or loosen.

① Turn handle (loosen or tighten)

until stopped by mount.

To tighten or loosen the handle

4-1 Tilting angle adjustment (+5°/-15°)：

Loosen handle, adjust TV to your desired position, then tighten

handle.

-15°

+5°

Handle

4-2 TV leveling adjustment (±3°):

Loosen 2 leveling bolts on the rear of TV plate by maximum 2

turns, adjust to level, and retighten to secure.

Tighten

Loosen

4-3 TV side to side movement (8"):

Loosen four bolts by maximum 2 turns and need two people cooperation to

lift the assembly unit (TV + TV plate + arms) at the same time slide it left or

right along the rail of the wall plate to perfectly position the TV. Then tighten

the bolts after adjustment.

1 2

bolts

Tighten

Loosen

±3°

203mm(8")

Autres manuels pour MD2198

Table des matières

Langues :

Autres manuels Mounting Dream Support et étagère

Mounting Dream

Mounting Dream MD2268-XL Manuel utilisateur

Mounting Dream

Mounting Dream MD2198 Manuel de programmation

Mounting Dream

Mounting Dream MD6230-M Manuel utilisateur

Mounting Dream

Mounting Dream MD5421 Manuel utilisateur

Mounting Dream

Mounting Dream MD2617-CA Manuel utilisateur

Mounting Dream

Mounting Dream MD2383 Manuel utilisateur

Mounting Dream

Mounting Dream MD5420-021 Manuel utilisateur

Mounting Dream

Mounting Dream MD5420-CA Manuel utilisateur

Mounting Dream

Mounting Dream MD2285-LA Manuel utilisateur

Mounting Dream

Mounting Dream HM2112-L Manuel utilisateur

Mounting Dream

Mounting Dream MD5401 Manuel utilisateur

Mounting Dream

Mounting Dream MD2380 Manuel utilisateur

Mounting Dream

Mounting Dream MD2653 Manuel utilisateur

Mounting Dream

Mounting Dream MD2285-LB Manuel utilisateur

Mounting Dream

Mounting Dream MD2209 Manuel utilisateur

Mounting Dream

Mounting Dream MD5420 Manuel utilisateur

Mounting Dream

Mounting Dream MD2268-LK Manuel utilisateur

Mounting Dream

Mounting Dream MD5420-03 Manuel utilisateur

Mounting Dream

Mounting Dream MD5402 Manuel utilisateur

Mounting Dream

Mounting Dream MD2380-021 Manuel utilisateur

Mounting Dream

Mounting Dream MD2268-MK-02 Manuel utilisateur

Mounting Dream

Mounting Dream MD5422 Manuel utilisateur

Mounting Dream

Mounting Dream MD2618 Manuel utilisateur

Mounting Dream

Mounting Dream HM2122-L Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur