Morphy Richards SpillMaster Manuel utilisateur

wwwwww..mmoorrpphhyyrriicchhaarrddss..ccoomm

SpillMaster

Please read and keep these instructions

VC70330 MUK Rev 1

For replacement parts, help with using your Morphy Richards product,

problems and lots more, contact us by phone or through our website.

UUKKHHeellpplliinnee::0088444488771100994499

RReeppllaacceemmeennttPPaarrttss::0088444488773300771155

IIrreellaannddHHeellpplliinnee::11880000440099111199

Use

This product is intended for picking-up liquids only. Picking up solid objects may cause

blockages in the nozzle. If blockages occur, please detach and clean the SpillMaster as directed.

Do not cover the bleed holes when holding the attachment, otherwise there may be a risk of the

cleaner overheating.

The SpillMaster must be attached securely and firmly to the vacuum cleaner hose or hose

handle. It may be necessary to use one of the attachment adaptors, supplied.

Safety devices

If the unit is tipped over in use, safety valves will operate to prevent water escaping, no pick-up

will be possible once these valves have operated. The valves will remain closed until the unit is

returned to it’s correct upright position and the suction is switched off. Similarly, if the unit is

overfilled, a float valve will operate, preventing any further pick-up. The suction must be

switched off and the tank emptied before re-use.

Filter

Regularly remove, clean and dry the filter.

Cleaning

Empty and rinse the product with clean lukewarm water after every use. Leave to dry upside

down for at least 24 hours or until completely dry before re-assembling the top unit to the tank.

Do not place in or near heating appliances to dry.

Getting the best from your new attachment...

70330 rev1 19/6/08 10:15 Page 1

IMPORTANT SAFETY

INSTRUCTIONS

The use of any electrical

appliance or attachment

requires the following common

sense safety rules.

Primarily there is danger of

injury or death and secondly the

danger of damage to the

appliance.

Please read these instructions

before using the attachment.

Location

• This appliance is intended for

domestic use only. Misuse or

use for commercial or any other

purpose will render the

guarantee invalid.

• Do not use or keep this product

outside.

• Do not store the appliance near

hot surfaces, eg. ovens or

heating appliances.

Personal safety

• Do not touch the cleaner, cable

or plug with wet hands.

• This product is not intended for

use by persons (including

children) with reduced physical,

sensory or mental capabilities,

or lack of experience and

knowledge, unless they have

been given supervision or

instruction concerning the use

of the product by a person

responsible for their safety.

• Children should be supervised

to ensure that they do not play

with the appliance or

attachment.

Product safety

• Do not modify the product in

any way.

• Use only as described in these

instructions.

• Never attempt to pick-up solids.

The SpillMaster is only designed

to pick up liquids.

• Never pick-up inflammable

liquids such as spirits.

• Never pick-up strong alkaline or

acidic liquids such as bleach.

• Never pick-up volatile material

such as copier toner.

• Never pick-up hazardous

materials such as asbestos

dust.

• Never pick-up very hot liquids

such as boiling water.

• Never pick-up hot substances

such as hot ashes.

• Keep the liquid away from the

vacuum cleaner and the cleaner

cable and plug.

• Ensure that the plug of the

vacuum cleaner is removed from

the socket outlet before cleaning

or maintaining the appliance.

UUKKHHeellpplliinnee0088444488771100994499RReeppllaacceemmeennttPPaarrttss0088444488773300771155IIrreellaannddHHeellpplliinnee11880000440099111199

70330 rev1 19/6/08 10:15 Page 2

FEATURES

⁄Filter

¤Hose / hose inlet

‹Bleed holes

›Filter release buttons

ﬁTop unit

ﬂTip-back safety device

‡Nozzle

·Water tank release button

‚Tip-sideways safety device

„Water tank

‰Max fill line

ÂFloat safety device

ÊHose inlet adaptors

(up to 4 sizes, dependent

on model)

ﬂ

„

wwwwww..mmoorrpphhyyrriicchhaarrddss..ccoomm

⁄

¤‹

ﬁ

‡

‰

‚

Ê Ê

Dependent Dependent

on model on model

›⁄

›

70330 rev1 19/6/08 10:15 Page 3

ASSEMBLY

Assembling the

SpillMaster A

The SpillMaster may arrive in

two parts.

To assemble the product, align

the arrows on the water tank

with the arrows on the top unit.

Push the two parts together and

rotate clockwise until the top

part clicks into place.

OPERATING THE

SPILLMASTER

Depending on your model of

cleaner, your SpillMaster may

require an adaptor.

If required, choose the

appropriate adaptor and fit as

shown B.

Attaching the

SpillMaster to you

vacuum cleaner

Assemble the vacuum cleaner

according to it’s instruction

booklet.

Ensure the vacuum cleaner is

switched off before attaching

the SpillMaster.

Attach the SpillMaster directly

onto the vacuum hose with

adaptor if required C.

It is not recommended to use

any extension tubes when using

the SpillMaster.

USING THE

SPILLMASTER

Turn the vacuum cleaner on.

Place the SpillMaster on the

floor and tilt forwards so the

nozzle touches the floor D.

You are now ready to pick up

any liquid spills.

The SpillMaster can be used on

all floor types but must only be

used for liquid spills. It has not

been designed to suck up

solids.

For maximum effectiveness, use

the SpillMaster in a steady, slow

motion, pulling it towards

yourself. Always ensure the

SpillMaster is tilted forwards E.

Ensure only the nozzle touches

the floor, so the water tank is

not dragged through the liquid

spill.

Backward strokes are more

effective on deeper carpets.

UUKKHHeellpplliinnee0088444488771100994499RReeppllaacceemmeennttPPaarrttss0088444488773300771155IIrreellaannddHHeellpplliinnee11880000440099111199

70330 rev1 19/6/08 10:15 Page 4

wwwwww..mmoorrpphhyyrriicchhaarrddss..ccoomm

SAFETY FEATURES

As well as the hose filter, there

are three other main safety

features F which will cut off

suction to the SpillMaster in the

event of improper use:

If the SpillMaster is tilted

backwards, a slug in the nozzle

suction chamber will slide

backwards, blocking the suction

to the hose G.

If the SpillMaster is tilted

sidewards, a slug in the suction

chamber connecting to the

liquid tank will slide upwards,

blocking the suction in the unit

If the SpillMaster is overfilled

with liquid, a float in the liquid

tank will rise upwards, blocking

the suction in the unit.

If any of the above occurs, turn

off your vacuum cleaner

immediately, empty the tank,

reassemble the SpillMaster and

resume use as described in

‘Using the SpillMaster’ section.

EMPTYING THE

SPILLMASTER

Ensure the vacuum cleaner

power is switched off.

Remove the vacuum hose from

the SpillMaster.

Take the SpillMaster to a sink or

drain to empty.

Press down on the tank release

button with one finger H.

With the other hand, rotate the

handle section anti-clockwise as

far as possible H.

Pull upwards to separate the

unit into it’s two parts.

Empty the contents of the

reservoir by tipping it upside

down over a sink or drain I.

Before safety

features activate

Safety features

activated

70330 rev1 19/6/08 10:15 Page 5

CLEANING THE

SPILLMASTER

It is recommended that the

SpillMaster is regularly cleaned

to prevent any build up of

residue.

Remove the filter by squeezing

the two white areas with a finger

and thumb and pull the white

tab until the filter is clear of the

product J.

Separate the SpillMaster into it’s

two parts as described in the

‘Emptying the SpillMaster’

section.

Empty the contents of the base

unit over a sink and then rinse

the reservoir with lukewarm

water to remove any residue.

Leave to dry upside down for at

least 24 hours or until

completely dry K.

HINTS & TIPS

(also see ‘Safety Features’)

• The SpillMaster can be used on

all floor types but must only be

used for liquid spills.

• It has not been designed to

suck up solids. If any solids

have accidentally been sucked

up, follow the advice in the

‘Cleaning’ section.

• Hold the SpillMaster ensuring

the bleed holes are not

obstructed L. If the bleed holes

are covered, this could result in

your vacuum cleaner over

heating.

• Do not attempt to overfill past

the max fill line. If overfilled, the

float safety cut-out will be

activated and the suction will

cease.

• If the float is activated, switch

the vacuum cleaner off and

empty the reservoir. The float will

drop back into it’s original

position.

• After use, empty the contents of

the water tank, clean and dry

the product fully.

• Regularly check that the filter is

not blocked, dirty or damp. If

the filter becomes dirty, rinse in

lukewarm water and leave to dry

fully before re-use.

• If the filter becomes damaged, it

must be replaced. Call our

helpline for replacement parts.

• When carrying the SpillMaster

to the sink, ensure it is kept

horizontal to prevent any

spillage.

PRODUCT STORAGE

• When finished, do not store

near any heat sources.

• Store in an upright, flat position.

• Only store when dry.

HELPLINE

If you have any difficulty with

your appliance, do not hesitate

to call us.

We are more likely to be able

to help than the store from

where you bought it.

Please have the following

information ready to enable our

staff to deal with your query

quickly.

• Name of the product

• Model number as shown on the

underside of the appliance.

• Serial number as shown on

underside of the appliance.

UK Helpline 0844 871 0949

Replacement Parts 0844 873 0715

Ireland Helpline 1800 409 119

UUKKHHeellpplliinnee0088444488771100994499RReeppllaacceemmeennttPPaarrttss0088444488773300771155IIrreellaannddHHeellpplliinnee11880000440099111199

70330 rev1 19/6/08 10:15 Page 6

wwwwww..mmoorrpphhyyrriicchhaarrddss..ccoomm

YOUR TWO YEAR

GUARANTEE

It is important to retain the

retailer’s receipt as proof of

purchase. Staple your receipt to

this back cover for future

reference.

Please quote the following

information if the product

develops a fault. These numbers

can be found on the base of the

product.

Model no.

Serial no.

All Morphy Richards products

are individually tested before

leaving the factory. In the unlikely

event of any appliance proving

to be faulty within 28 days of

purchase, it should be returned

to the place of purchase for it to

be replaced.

If the fault develops after 28

days and within 24 months of

original purchase, you should

contact the Helpline number

quoting Model number and

Serial number on the product, or

write to Morphy Richards at the

address shown.

You may be asked to return a

copy of proof of purchase.

Subject to the exclusions set out

below (see Exclusions), the

faulty appliance will then be

repaired or replaced and

dispatched usually within 7

working days of receipt.

If you suspect a fault, follow the

simple checks detailed below

before retrying the appliance or

calling the helpline.

• Check for blockages.

• Check the safety devices have

not operated.

If, for any reason, this item is

replaced during the 2 year

guarantee period, the guarantee

on the new item will be

calculated from the original

purchase date. Therefore, it is

vital to retain your original till

receipt or invoice to indicate the

date of initial purchase.

To qualify for the 2 year

guarantee, the appliance must

have been used according to the

instructions supplied.

EXCLUSIONS

Morphy Richards shall not be

liable to replace or repair the

goods under the terms of the

guarantee where:

1The fault has been caused or is

attributable to accidental use,

misuse, negligent use or used

contrary to the manufacturer’s

recommendations or where the

fault has been caused by power

surges or damage caused in

transit.

2The appliance has been used on

a voltage supply other than that

stamped on the products.

3Repairs have been attempted by

persons other than our service

staff (or authorised dealer).

4The appliance has been used for

hire purposes or non domestic

use.

5The appliance is second hand.

6Morphy Richards are not liable

to carry out any type of servicing

work under the guarantee.

7The guarantee excludes

consumables such as filters.

• This guarantee does not confer

any rights other than those

expressly set out above and

does not cover any claims for

consequential loss or damage.

This guarantee is offered as an

additional benefit and does not

affect your statutory rights as a

consumer.

• This guarantee is valid in the UK

and Ireland only.

70330 rev1 19/6/08 10:15 Page 7

Morphy Richards products are intended for household use only.

Morphy Richards has a policy of continuous improvement in product quality and

design. The company, therefore reserves the right to change the specification of

it’s models at any time.

The After Sales Division

Morphy Richards Ltd

Mexborough, SouthYorkshire,

England, S64 8AJ

Helplines (office hours)

UK 0844 871 0949

Spare Parts 0844 873 0715

Republic of Ireland 1800 409 119

VC70330 MUK Rev 1 06/08

FFoorrddeettaaiillssooffootthheerrpprroodduuccttssiinntthheeMMoorrpphhyyRRiicchhaarrddssrraannggee,,pplleeaasseesseeeeoouurrwweebbssiittee......

wwwwww..mmoorrpphhyyrriicchhaarrddss..ccoomm

For electrical products sold within the European

Community. At the end of the electrical products

useful life, it should not be disposed of with

household waste.

Please recycle where facilities exist. Check with

your Local Authority or retailer for recycling

advice in your country.

70330 rev1 19/6/08 10:15 Page 8

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Morphy Richards Aspirateur

Morphy Richards

Morphy Richards VC73240MUK Manuel utilisateur

Morphy Richards

Morphy Richards PERFORMAIR CYCLONIC VACUUM CLEANER Manuel utilisateur

Morphy Richards

Morphy Richards IB73100 Manuel utilisateur

Morphy Richards

Morphy Richards Supervac Sleek Pro Manuel utilisateur

Morphy Richards

Morphy Richards Supervac Deluxe Manuel utilisateur

Morphy Richards

Morphy Richards 70317 Manuel utilisateur

Morphy Richards

Morphy Richards BIG POD BAGLESS VACUUM CLEANER - REV 2 Manuel utilisateur

Morphy Richards

Morphy Richards Ecovac 70096 Rev 2 (Page 1) Manuel utilisateur

Morphy Richards

Morphy Richards Scoot cylinder vacuum cleaner Manuel utilisateur

Morphy Richards

Morphy Richards POD VACUUM CLEANER Manuel utilisateur

Morphy Richards

Morphy Richards IB71053 Manuel utilisateur

Morphy Richards

Morphy Richards Storm Manuel utilisateur

Morphy Richards

Morphy Richards VORTICITY Manuel utilisateur

Morphy Richards

Morphy Richards Boxer wet & dry vacuum cleaner Manuel utilisateur

Morphy Richards

Morphy Richards Supervac 732009 Manuel utilisateur

Morphy Richards

Morphy Richards IB73340 Manuel utilisateur

Morphy Richards

Morphy Richards LOX VACUUM CLEANER Manuel utilisateur

Morphy Richards

Morphy Richards IB73170 Manuel utilisateur

Morphy Richards

Morphy Richards IB73301 Manuel utilisateur

Morphy Richards

Morphy Richards IB73105 Manuel utilisateur

Morphy Richards

Morphy Richards Perfom air VC71067MUK Manuel utilisateur

Morphy Richards

Morphy Richards Essentials 73179 Manuel utilisateur

Morphy Richards

Morphy Richards Storm 73215 Manuel utilisateur

Morphy Richards

Morphy Richards IB70041 Manuel utilisateur

Manuels Aspirateur populaires d'autres marques

Bissell

Bissell LittleGreen Proheat 1425 Series Manuel utilisateur

Panasonic

Panasonic MC-YL637S147-AE Manuel utilisateur

NEFF

NEFF N17XH10 0 Series Manuel utilisateur

LG A9 Series Manuel utilisateur

Oreck

Oreck Cordless Captura BK51700 Series Manuel utilisateur

Kogan

Kogan KAVACROBVWA Manuel utilisateur

Kränzle

Kränzle VENTOS 50 ID Guide de l'utilisateur

EVVO

EVVO Ai35 Manuel utilisateur

DeWalt

DeWalt DWH200D Manuel utilisateur

Pontec

Pontec Pondomatic Vacuum Cleaner Manuel utilisateur

Cleanmaxx

Cleanmaxx PC-P007E Manuel utilisateur

Exido

Exido 240-114 Manuel utilisateur

RIDGID

RIDGID WD1685AU0 Manuel utilisateur

Ezviz

Ezviz RE4P Manuel utilisateur

STG global

STG global TANVAC HDV3000 Manuel utilisateur

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Manuel utilisateur

Factory

Factory M3340 Manuel utilisateur

Shop-Vac

Shop-Vac VN92 SERIES Manuel utilisateur