Morphy Richards IB70045 Manuel utilisateur
Fusion bagless cylinder vacuum cleaners
Please read and keep these instructions
www.morphyrichards.co.uk
getting the best from your
new cleaner...
If your cleaner is not picking up as well as it should,
please check
•Filters
It is important that the airbox and filters are cleaned regularly to allow
air through the appliance. Tap to remove dust, the filter can also be
washed in warm water and left to air dry.
IMPORTANT - Ensure filter is totally dry before refitting into machine.
A spare pleated filter is provided, this allows one to be washed
and dried whilst the other is in use.
If you find that washing the filter is a problem we can help. Call our
dedicated helpline on 0870 060 2604 for further details.
• Blockages
Check the hose, handle and tools for blockages.
•Overheating protection
The cleaner automatically cuts off in the event of overheating caused
by blocked hoses / filters. Remove plug, clear blockage and allow 15
minutes for the cleaner to automatically reset.
2
Important safety
instructions
The use of any electrical appliance
requires the following common sense safety
rules.
Primarily there is danger of injury or
death and secondly the danger of damage
to the appliance. These are indicated in the
text by the following two conventions:
WARNING: Danger to the person!
IMPORTANT: Damage to the appliance! In
addition we offer the following safety advice.
Location
•Do not use or keep this product outside
when it is raining.
•Do not store the appliance near hot
ovens or heating appliances.
Children
•Children do not understand the dangers
associated with operating electrical
appliances. Never allow children to use
this appliance.
Personal safety
•The plug must be removed from the wall
socket before cleaning or maintaining
the appliance.
•Never modify the cleaner in any way.
Other safety considerations
•Never use in the presence of explosive
liquids or vapours.
•Never pick up inflammable or poisonous
liquids such as petrol, copier toner or
other volatile substances. Never pick up
acids, asbestos or asbestos dust.
•Repairs to electrical appliances are only
to be undertaken by trained personnel.
Unprofessional repairs can be
dangerous for users.
•Use only genuine Morphy Richards
spare parts and accessories.
•If the electrical cable becomes damaged
the complete cable assembly must be
replaced. Do not attempt this task
yourself, contact Morphy Richards using
the replacement parts number on the
front of this leaflet.
•The appliance must never be left running
when unsupervised.
•This vacuum cleaner is intended for
domestic use only. Misuse or use for
commercial or any other purpose will
render the guarantee invalid.
•Always disconnect the appliance from
the mains supply after use or prior to
cleaning or replacing the airbox or filters.
Product safety
•Never use the appliance without the
airbox or filters being installed.
•Never use the appliance to vacuum hot
ashes, broken glass or sharp objects.
•Never modify the cleaner in any way.
•To protect against fire, electric shock and
personal injury do not immerse cord,
plug or cleaner in water or other liquid.
Electrical requirements
Check that the voltage on the rating
plate corresponds with your house
electricity which must be A.C. (alternating
current).
If the socket outlets in your home are not
suitable for the plug supplied with this
appliance the plug should be removed and
the appropriate one fitted.
If you cut off the plug and let go of the
cable it will rewind into the machine.
Therefore you must pull out a length of
cable and secure it before cutting off the
plug and refitting a new one.
IMPORTANT: The plug removed from
the mains lead, if severed, must be
destroyed as a plug with a bared flexible
cord is hazardous if engaged into a live
socket outlet.
Should the fuse in the 13 amp plug
require changing a 13 amp BS1362 fuse
must be fitted.
3
›
·
fl
‚
Á
Features
⁄Dust compartment cover
¤Inlet for suction hose
‹Dust compartment release button
›Tool storage compartment cover
fiAir box
flElectronic suction power control
‡On/off foot switch
·Cable rewind foot switch
‚Exhaust filter cover
„Carrying handle
‰Tube park (on underside of cleaner)
ÂTube standby slot
Accessories you should have
13 and 14 come assembled as one piece
ÊSuction hose with 360˚swivel connector
ÁHandle with airflow control
ËFloor nozzle
ÈTelescopic metal tube
ÍUpholstery tool
ÎCrevice tool
ÏFurniture brush
ÌSuction gauge
ÓHard floor brush
Ë
Ê
‰
Â
È
‹
¤
ÎÍ
Ï
⁄
fi
‡
„
Ì
Ó
Assembly
Push the elbow-shaped end of the suction
hose into the housing until it clicks into place.
Te lescopic tube È
Attach the tube to the handle.
To adjust the length, press the release button
as indicated and pull or push the tube to the
desired length.
Floor nozzle Ë
This nozzle is suitable for general purpose
cleaning on a wide variety of floor coverings.
Hard floor nozzle Ó
This nozzle is suitable for hard floors, such
as wood, laminate and tiled surfaces.
Operation
The cable should always be fully withdrawn
before plugging into an electrical socket.
Switching on
Press foot pedal to start the motor.
4
È
Controlling suction
power
The suction power can be varied to suit the
surface being cleaned, by using the electronic
suction power regulator. See table for guideline
settings.
Overheating protection
In the event of a motor overload, your
vacuum cleaner will switch off automatically.
Press the on/off switch and let the motor cool
down.
The vacuum cleaner cuts out automatically
when:
•The floor nozzle or tubes become blocked
•The airbox filter is very dirty.
•The motor protection filter is very dirty
•The exhaust filter is very dirty
Rectify the cause of the cut out and do not
use for 15 minutes to allow the motor to cool.
Power setting Application
Curtains
and delicate
fabrics
Textiles and
upholstery
Floor
coverings
such as rugs
or economy
setting
for carpets
Carpets or
hard floor
coverings
5
Accessories
The accessories are stored in the tool
compartment as shown.
The accessories can be attached to the end
of the tube or to the handle.
•Upholstery tool Ífor curtains and
sofas/armchairs.
•Crevice tool Îfor small gaps - various
surfaces.
•Furniture brush Ïfor dusting shelves etc,
(pushes onto the crevice tool).
Tube standby
During short breaks in cleaning the tubes
can be held in an upright, ‘standby’ position,
whilst you move furniture for instance.
CAUTION: Ensure that the appliance is never
left unattended whilst it is switched on.
After vacuum-cleaning
1Switch off the vacuum cleaner.
2Unplug from the mains.
3Use a hand or foot to operate pedal to
rewind the cable.
CAUTION: When using the cable rewind,
always hold the plug as the cable will rewind
quickly.
Í
Î
Ï
6
Emptying the air box
To maintain the performance of your vacuum
cleaner the airbox must be emptied regularly
and the filters cleaned.
The suction gauge indicates the air flow
through the cleaner. If in use, the suction gauge
is continuously in the red, the airbox must be
emptied and the filters cleaned. The suction
gauge will also go into the red if the hose or
nozzles become blocked.
•Press the dust compartment release button
‹indicated by arrow 1 and lift up the dust
compartment lid. (arrow 2)
•Holding the handle on the airbox lift upwards
and remove the airbox from the machine.
Take the airbox to the dustbin.
•Unclip the airbox lid as shown (from the
handle side first). Place the lid to one side
and empty the contents of the airbox into the
dustbin.
7
8
Cleaning the airbox filter
IT IS IMPORTANT TO CLEAN THE FILTER
TO MAINTAIN PERFORMANCE, EVERY TIME
THE AIRBOX IS EMPTIED.
•After emptying the dust, twist the filter
assembly anti-clockwise to remove as
shown.
•Slide off the outer mesh filter.
•Tap the pleated filter over a dustbin to
remove any remaining dust.
Washing the airbox filter
IT IS IMPORTANT TO REGULARLY WASH
THE PLEATED FILTER TO MAINTAIN
PERFORMANCE.
Wash in warm water and leave to air dry. Do
not use detergents as this can affect the
performance of the filter.
CAUTION: THE FILTER MUST BE TOTALLY
DRY BEFORE REPLACING INTO THE
MACHINE.
A spare pleated filter is provided.
Replacement filters can be purchased from
our Replacement Parts Helpline Number
0870 167 6635.
•To reassemble, slide the mesh filter over the
pleated filter then lock the filter assembly into
the airbox by twisting clockwise 1/4of a turn.
Replace the airbox lid by locating the two
tabs on the underside of the airbox (opposite
side of handle) into the lid and clip into
place.
•Slide the airbox back into the dust
compartment ensuring that the front hook of
the airbox is located into the slot provided.
DO NOT FIT THE AIRBOX WITHOUT THE
FILTER BEING IN PLACE.
Cleaning the motor
protection filter
The motor protection filter is accessible from
the dust compartment only when the airbox has
been removed first.
WARNING: NEVER USE THE APPLIANCE
WITHOUT THE MOTOR PROTECTION FILTER
INSTALLED, OTHERWISE DAMAGE TO THE
MOTOR MAY OCCUR WHICH WOULD NOT BE
COVERED BY THE GUARANTEE.
1Open the flap on the filter cassette.
2Take out the micro hygiene filter.
3Wash in warm water and leave to air dry. DO
NOT USE DETERGENTS.
4Replace the dry filter and close the filter
cassette.
5Insert the airbox and close the dust
compartment cover.
Recommendation
The micro hygiene filter should be cleaned
when you have emptied the airbox 5 times.
Important
Ensure the filter is completely dry before
reinserting into the machine.
Replacement filters can be purchased from
our Replacement Parts Helpline Number
0870 167 6635.
9
Cleaning the exhaust
air filter
The exhaust air filter cleans the air before it
exits the vacuum cleaner.
Recommendation
The exhaust air filter should be cleaned
when you have emptied the airbox 5 times.
How to clean the exhaust air filter
1Push the lock and remove the cover in an
upward direction.
2Lift the exhaust air filter upwards and
remove.
3Wash in warm water and leave to air dry. DO
NOT USE DETERGENTS.
4Replace the dry filter and close the cover.
Important
Ensure the filter is completely dry before
reinserting into the machine.
Replacement filters can be purchased from
our Replacement Parts Helpline Number
0870 167 6635.
Storage
Tube park
The vacuum cleaner can be stored in an
upright position. Rotate the floor nozzle until the
lug on the back of it can be fitted into the tube
park slot on the base of the appliance.
10
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Morphy Richards Aspirateur
Morphy Richards
Morphy Richards LOX VACUUM CLEANER Manuel utilisateur
Morphy Richards
Morphy Richards Allergy cylinder vacuum cleaner Manuel utilisateur
Morphy Richards
Morphy Richards VC73111 MUK Manuel utilisateur
Morphy Richards
Morphy Richards ESSENTIAL MINI VACUUM CLEANER - REV 1 Manuel utilisateur
Morphy Richards
Morphy Richards Bagless Cylinder Vacuum Cleaner Manuel utilisateur
Morphy Richards
Morphy Richards PERFORMAIR CYCLONIC VACUUM CLEANER 71062 Manuel utilisateur
Morphy Richards
Morphy Richards 732000 Supervac Manuel utilisateur
Morphy Richards
Morphy Richards Steam cleaner Manuel utilisateur
Morphy Richards
Morphy Richards BIG POD BAGLESS VACUUM CLEANER - REV 2 Manuel utilisateur
Morphy Richards
Morphy Richards VORTICITY Manuel utilisateur
Morphy Richards
Morphy Richards IB73105 Manuel utilisateur
Morphy Richards
Morphy Richards PerformAir Upright Vacuum Manuel utilisateur
Morphy Richards
Morphy Richards 73199 Manuel utilisateur
Morphy Richards
Morphy Richards GrimeBuster steam cleaner Manuel utilisateur
Morphy Richards
Morphy Richards Goblin 73276 Manuel utilisateur
Morphy Richards
Morphy Richards ECO PRIUS Manuel utilisateur
Morphy Richards
Morphy Richards 73281 Manuel utilisateur
Morphy Richards
Morphy Richards Essentials Bag Vacuum Cleaner Manuel utilisateur
Morphy Richards
Morphy Richards STORM LIGHT UPRIGHT VACUUM CLEANER - REV 3 Manuel utilisateur
Morphy Richards
Morphy Richards ORB PETS CYCLONE VACUUM CLEANER - REV 1 Manuel utilisateur
