Morphy Richards IB22078 Manuel utilisateur
HELPLINE
(8.30-5.00 Monday-Thursday/8.30-4.00 Friday)
UK 0870 060 2614
Republic of Ireland 1800 409119
Morphy Richards products are intended for household use only.
Morphy Richards has a policy of continuous improvement in product
quality and design. The company therefore reserves the right to
change the specification of its models at any time.
Part Number – PC22078C REV 1
The model number of the straightener included in this kit is 22020.
When contacting Morphy Richards please quote this number for
the straightener and model 22078 for the accessories included.
Registered address:
Morphy Richards Ltd
Mexborough, South Yorkshire S64 8AJ
www.morphyrichards.com PROFESSIONAL THERMOCERAMIC STRAIGHTENER
WITH HEAT PROTECTION MAT AND MARK HILL COSMETICS
THERMOCERAMIC
STYLING KIT
Your new thermoceramic straightener has been designed by electrical
experts Morphy Richards and twice international hairdresser of the year
Mark Hill. Use this style guide to help you get the most from your
styling tool.
HOW DOES THERMOCERAMIC
TECHNOLOGY WORK?
Morphy Richards heat-styling products feature ThermoCeramic technology to give you
outstanding professional performance. ThermoCeramic styling tools feature a ceramic finish that
helps your hair look its best by ensuring that the hair cuticle lies flat, reflecting light and looking
healthy and shiny. Better still, the ceramic finish acts as a barrier to protect your hair from the high
styling temperature, minimising damage to the cuticle. So you get the best performance and the
best hair care in the same great styling tool. ThermoCeramic heating elements heat up in
seconds and ensure a high and constant temperature.
Before After
STEP 1: DRYING YOUR HAIR
After you have shampooed and conditioned your hair,
comb through gently using a wide toothcomb.
When wet, hair can stretch by up to 1/3of its length.
Treat it gently at this stage, to avoid damaging your hair.
Before you apply a heat protection spray, use your
hairdryer to ‘waft’ the excess moisture from your hair.
If you apply a styling product on very wet hair, you may
dilute the product, making it less effective. Apply the
heat protection spray evenly from the roots of your hair
to the ends
Using sectioning clips take a small section of hair from
the nape of the neck, and secure the rest of your hair
away from it. Using a paddle brush, dry the hair,
pointing the hairdryer down the hair from roots to ends
to help avoid any ‘frizzy’ bits
Once this section is dry, use the cool button for a
couple of seconds to ‘set’ the hair
Take the next section of hair, dry and cool. Do this for
the rest of your hair. This may take a little longer than
you are used to at first, but the results you achieve will
be worth it, and your style will last longer
STEP 2: STRAIGHTENING YOUR HAIR
On thoroughly dry hair, section hair from the nape of the
neck no deeper than 2cm and secure the rest of the hair
away with clips
Select either the lower or higher heat setting depending
on whether you have thin or thinker hair.
Spray the full length of the section with the Mark Hill
Heat Protection Spray
Clamp the roots of the section between the
straightening plates
Gently and swiftly run the straighteners down the hair
for five seconds
Take the next section and repeat until desired effect
is achieved
Finish by running a wide toothcomb through the hair
and spraying with the Mark Hill Finishing Spray to add
shine and set your style.
STYLE VARIATIONS
To retain plenty of body and bounce
Straighten only the top sections of the hair around the
crown areas to give a smooth yet voluminous finish.
To create softness and shape around the face
While gliding the straightener down your hair, as you
get half way down the section, turn your wrist inwards
to shape the hair around your face and frame your
features perfectly.
For a choppier texture
Flick-out hair at the very ends by turning wrists outwards
as you get about two thirds of the way down your section.
USING YOUR STRAIGHTENER:
1. Your exclusive Morphy Richards Straightening Kit includes the straightener, Mark Hill Heat
Protection spray, finishing spray, heat proof mat and stylish storage tin. Whilst hair is still
damp, spray liberally with the Mark Hill Heat Protection spray. Dry hair thoroughly and brush
your hair through using the paddle brush. Use sectioning clips to clip sections of your hair
out of the way while you straighten.
2. The heat-proof mat is designed to protect surfaces from heat damage and to wrap your
straighteners once the power has been switched off. Once cooled down your straighteners
and accessories can all be stored in the stylish tin included.
3. Choose either setting I or II dependent on the temperature you require. The temperature you
need will depend on the thickness of your hair and the result you want to achieve. Setting ‘I’
is the lowest, ‘II’ the highest. The red indicator light will illuminate when you select the heat
setting required. Once the straightener has reached a temperature suitable for use, the light
will begin to flash. This usually takes less than one minute.
!Ensure your hair is thoroughly dry before you begin styling – this will avoid damage to
the hair.
4. Divide your hair into sections, brushing each section thoroughly.
5. Clamp a section of the hair between the straightening plates, as close to the roots
as possible. Gently slide the straightener down your hair shaft to the ends. For more
difficult sections of hair, you may need to repeat this. Avoid leaving your hair clamped inside
the straightener for more than a few seconds, as this could cause unnecessary damage to
the cuticle.
6. To create movement in the hair, use your wrist to shape the ends either inwards our outwards
depending on the style you wish to achieve.
7. Repeat on all sections of the hair.
8. Clean your straightener regularly for best results. Always do this when the straightener is
switched off and has cooled down.
WIRING
The product is fitted with a 13A (BS1363) plug. A 3A fuse (BS1362) must be used. Check the
voltage on the rating plate of your appliance corresponds with your house electricity supply which
must be AC (Alternating Current). If the socket outlets in your home are not suitable for the plug
supplied with this appliance the plug should be removed and an appropriate one fitted.
IMPORTANT: THE PLUG, REMOVED FROM THE MAINS LEAD, IF SEVERED, MUST BE
DESTROYED AS A PLUG WITH BARED FLEXIBLE CORD IS HAZARDOUS IF
ENGAGED INTO A LIVE SOCKET OUTLET.
CLEANING YOUR STRAIGHTENER
Over time, you will find a natural build up on your straightening plates. This can be caused by
natural oils in your hair and styling products and lotions. At the first sign of build up, you should
clean your straightening plates. To do this, always switch your straightener off and wait for them
to cool down. Wipe with a damp cloth, or a non abrasive cleaning wipe. Failure to do this may
mean the build up becomes burnt onto the straightening plates and they will become difficult to
clean. If your straightening plates do become discoloured it will NOT affect their performance.
MAINS LEAD
As a safety precaution, and to prolong the life of your appliance, do not wrap the mains lead
around the straightener unit. Use the cable storage provided in the base unit.
HEAT PROTECTION MAT
The heatproof mat is designed to protect surfaces from heat damage. To use – rest
your straighteners on the mat, or wrap your straighteners inside when they have been switched
off. DO NOT clamp the mat between the straightening plates while your straightener is hot
as this can cause damage. With prolonged use you may find your heatproof mat becomes
discoloured – this is normal.
SAFETY INFORMATION
When using your hair straightener, basic safety precautions should always be followed.
Please read these instructions carefully before using the product, and keep them in a
safe place for future reference.
1. This straightener is of professional standard, and reaches very high temperatures.
Always be careful not to allow the plates to come into contact with the skin.
2. Do not leave the plates in contact with the hair for more than a few seconds.
The straightener reaches very high temperatures, so there is no need to leave the
hair between the plates for longer than a few seconds. This will avoid unnecessary damage
to the hair cuticle.
3. Use the appliance for its intended use only.
4. To protect against the risk of electric shock, do not immerse the appliance in water or any
other liquids.
5. It is recommended that this appliance should not be used by children.
6. Always unplug your appliance when it is not in use.
7. Do not leave the straightener switched on while unattended.
8. Do not use this appliance near bathtubs, showers, basins or other vessels
containing water.
9. In the event of cable damage, do not attempt to replace the mains cable – return to
Morphy Richards.
10. After use, do not store until the product has cooled down.
11. Do not place the straightener on surfaces likely to be damaged by the heat.
12. Ensure your hair is completely dry before you begin straightening. Applying high
temperatures to damp or wet hair will increase the probability of hair breaking or becoming
permanently damaged.
13. Try and use your straightener for as short a time as possible – prolonged use can cause
unnecessary damage to your hair.
2-YEAR GUARANTEE
It is in your interest to retain the retailer’s receipt as proof of purchase. Please quote the model
number if the product develops a fault. This number can be found on the handle of the product.
All Morphy Richards products are individually tested before leaving the factory. In the unlikely
event of any appliance proving to be faulty within 28 days of purchase it should be returned to
the place of purchase for it to be replaced.
If a fault develops after 28 days and within 24 months of original purchase, you should contact
the helpline number quoting the model number of the product, or write to the address below.
You will be asked to return the product (in secure packaging) to the address below along with a
copy of proof of purchase:
The After Sales Division
Morphy Richards Ltd
Mexborough
South Yorkshire
S64 8AJ
www.morphyrichards.com
PRODUCT FEATURES:
1
2
6
5
8
4
3
9
7
1. Ceramic plates
2. ThermoCeramic element for
rapid heat-up
3. Two heat settings
4. Includes Mark Hill heat protection
and finishing sprays
5. Heat proof mat
6. Stylish tin
7. 25mm plates
8. Rubber plate guards
9. Three metre salon-length cable
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Morphy Richards Fer à coiffer
Morphy Richards
Morphy Richards IB22028 Manuel utilisateur
Morphy Richards
Morphy Richards IBRB4005 Guide de l'utilisateur
Morphy Richards
Morphy Richards SG22045 Manuel utilisateur
Morphy Richards
Morphy Richards IB22033 Manuel utilisateur
Morphy Richards
Morphy Richards IB22002 Manuel utilisateur
Morphy Richards
Morphy Richards IBRB4008 Guide de l'utilisateur
Morphy Richards
Morphy Richards IB22044 Manuel utilisateur
Morphy Richards
Morphy Richards IB22059 Manuel utilisateur
Morphy Richards
Morphy Richards IB22020 Manuel utilisateur
Morphy Richards
Morphy Richards IB22047 Fiche d'information produit
Morphy Richards
Morphy Richards IB22011 Manuel utilisateur
Morphy Richards
Morphy Richards IB22075 Fiche d'information produit
Morphy Richards
Morphy Richards IB22089 Fiche d'information produit
Morphy Richards
Morphy Richards IB22026 Manuel utilisateur
Morphy Richards
Morphy Richards IB22074 Fiche d'information produit
Morphy Richards
Morphy Richards IB22064 Manuel utilisateur
Morphy Richards
Morphy Richards IB22018 Manuel utilisateur
Morphy Richards
Morphy Richards IB22060 Manuel utilisateur
Morphy Richards
Morphy Richards IB22043 Manuel utilisateur
Morphy Richards
Morphy Richards IB22052 Manuel utilisateur
