Morphy Richards IB22012 Manuel utilisateur
Instructions
‘Kick It’ TM The ultimate styling tong
Model 22012 to create those funky, choppy styles
Thank you for buying your new Morphy Richards, Mark Hill ultimate styling tong. Please
read these instructions carefully before use and keep in a safe place for future reference.
Key Features
Includes
• 25mm tong barrrel for smaller softer curls
• 38mm tong barrrel for luscious, bouncy curls
• 38mm kicking barrrel shaped to create a real kick to the ends of your hair
• 3 metre salon length cable for flexibility and ease of use
• 4 sectioning clips to make styling easier and hassle free
• Wire safety stand as barrel gets very hot.
Cool tip
for ease of use
Finger grips
for comfort and safety
Swivel cord
for ease of use
3 heat settings
for fine, medium, thick hair
25mm tong barrrel
38mmbarrel
38mm unique kicking barrrel
Heat protection
stand Spring loaded
clasp
Styling Tips
Having shampooed your hair, ensure
that it is rinsed properly as shampoo that is
left in the hair will leave it looking dull.
To maximise shine, rinse your hair in
cool water thoroughly.
Comb your hair through with a wide
toothed comb to remove tangles before
styling.
Rough dry your hair using a Morphy
Richards Hairdryer.
Avoid using styling products such as
hairspray, gel or mousse before or during
styling as it may cause your hair to stick to
the plates.
Connecting attachments
Align the attachment with the handle
using the graphics on the product and twist
the locking collar to secure in place.
To remove reverse the process.
Caution - when changing barrels they
are hot. Never leave the main unit
without an attachment. It may burn
surfaces or cause fires.
When the tong is heating up, make sure
that it is positioned so that the barrel is not
touching the surface to avoid any damage.
3
Styling
When preparing to style your hair using
Kick it TM, plug the appliance in and switch it
on before you start to prepare/dry your hair.
This will give it enough time to heat up to
the correct temperature to style your hair.
We recommend that you choose which
attachment you are going to use first and
heat the tong up with this attachment on as
this will also enable the tong to reach its
optimum temperature quicker.
Tong barrel attachments
Take a small section of hair. Raise the
tong by pressing the clamp lever. Place the
outer section of hair between the tong and
the barrel. Lower the tong to trap the end of
the hair. Rotate the handle to wind the hair
around the outside of the tong. You may find
this easier if you hold the cool tip loosely
with the other hand.
Leave the tong in place for about 10-15
seconds (depending on the length and
thickness of hair) then unwind carefully.
Raise the tong to release the hair and
leave the curl in position until it has cooled.
Kick it TM attachment
The kick it tool is uniquely shaped like a
lip to give a real kick to the ends of your
hair. Take sections of the hair and wrap
around the shaped barrel and turn the hair
outwards and hold for 10-15 seconds.
Important Safeguards
When using your hair appliance, basic
safety precautions should always be
followed.
1Read all instructions carefully.
2Use the appliance for its
intended use only.
3To protect against the risk of
electric shock, do not immerse
the appliance in water or in any
other liquids.
4It is recommended that this
appliance should not be used by
children.
5Be sure that your household
voltage corresponds to the
voltage marked on the tong.
6Always unplug your appliance
when it is not in use.
7Do not leave the tong switched
on whilst unattended.
8Do not take this product into a
bathroom or use near a water basin.
9In the event of cable damage do not
attempt to replace the mains cable,
return to morphy richards.
10 After use do not store until the product
has cooled down.
11 Do not place the tong on surfaces
likely to be easily damaged by the heat.
12 Do not use the appliance without
an attachment fitted as the barrel
is very hot. The barrel must be
placed on the safety stand if no
attachment is fitted. Failure to do
this may result in fire.
4
Wiring
This product is fitted with a 13A
(BS1363) plug. A 3 amp fuse (BS1362)
must be used.
Check that the voltage on the rating
plate of your appliance corresponds with
your house electricity supply which must be
A.C. (Alternating Current).
If the socket outlets in your home are
not suitable for the plug supplied with this
appliance the plug should be removed and
the appropriate one fitted.
IMPORTANT : THE PLUG REMOVED
FROM THE MAINS LEAD, IF SEVERED,
MUST BE DESTROYED AS A PLUG WITH
BARED FLEXIBLE CORD IS HAZARDOUS
IF ENGAGED INTO A LIVE SOCKET
OUTLET.
Mains Lead
As a safety precaution and to prolong
the life of your appliance, do not wrap the
mains lead around the appliance as this will
cause damage.
5
Morphy Richards products are intended for household use only. Morphy Richards has a policy of
continuous improvement in product quality and design. The Company, therefore, reserves the right to
change the specification of its models at any time.
446/8001/34 Rev 4
Imported by : Morphy Richards Ltd, Talbot Road, Mexborough, S64 8AJ
Two Year Guarantee
It is in your interest to retain the retailers receipt as proof of purchase. Please quote the model
number if the product develops a fault. This number can be found on the handle of the product.
All Morphy Richards products are individually tested before leaving the factory. In the unlikely
event of any appliance proving to be faulty within 28 days of purchase it should be returned to the
place of purchase for it to be replaced.
If a fault develops after 28 days and within 24 months of original purchase, you should contact the
helpline number quoting the model number of the product, or write to the address below. You will
be asked to return the product (in secure packaging) to the address below along with a copy of
proof of purchase.
The After Sales Division
Morphy Richards Ltd
Mexborough
South Yorkshire
England
S64 8AJ
Helpline (8:30-5:00 Mon-Thur/ 8:30-4:00 Fri) UK (local rate) 08450 777700,
Republic of Ireland 1800 409119
Morphy Richards Website www.morphyrichards.co.uk
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Morphy Richards Fer à coiffer
Morphy Richards
Morphy Richards IB22047 Fiche d'information produit
Morphy Richards
Morphy Richards IB22059 Manuel utilisateur
Morphy Richards
Morphy Richards IB22022 Manuel utilisateur
Morphy Richards
Morphy Richards IB22052 Manuel utilisateur
Morphy Richards
Morphy Richards IB22028 Manuel utilisateur
Morphy Richards
Morphy Richards IB22037 Manuel utilisateur
Morphy Richards
Morphy Richards IB22060 Manuel utilisateur
Morphy Richards
Morphy Richards IB22063 Fiche d'information produit
Morphy Richards
Morphy Richards IB22089 Fiche d'information produit
Morphy Richards
Morphy Richards IB22064 Manuel utilisateur
Morphy Richards
Morphy Richards SG22046 Manuel utilisateur
Morphy Richards
Morphy Richards IB22002 Manuel utilisateur
Morphy Richards
Morphy Richards IB22045 Fiche d'information produit
Morphy Richards
Morphy Richards IB22020 Manuel utilisateur
Morphy Richards
Morphy Richards IBRB4008 Guide de l'utilisateur
Morphy Richards
Morphy Richards SG21024 Manuel utilisateur
Morphy Richards
Morphy Richards IB22069 Manuel utilisateur
Morphy Richards
Morphy Richards IB22070 Fiche d'information produit
Morphy Richards
Morphy Richards IBRB4005 Guide de l'utilisateur
Morphy Richards
Morphy Richards IB22048 Fiche d'information produit
