Morphy Richards Saturn Steam Manuel utilisateur

R 305000 MUK Rev1

* Register at www.morphyrichards.co.uk/support

UK and Ireland customers only

Please read and keep these instructions for future use

IMPORTANT: To prevent limescale damage we recommend a combination of 50%

tap water and 50% distilled, deionised or demineralised water. This is particularly

important if you live in a hard water area.

Never use battery topping up fluid or water containing any substances like starch,

sugar, fragrant additives or defrosted water from a refrigerator.

Failure to maintain your iron will invalidate your guarantee.

If you experience any problems with this iron, do not return to the store.

Please contact our help line who will be happy to help:

We do stock spare filler lids for this iron, so if you need a replacement please call 0344 873 0710.

UK: 0344 871 0944 IRE: 1800 409 119

We'll keep you updated with special offers, competitions and important product information.

Pressurised Steam Iron

RN305000 MUK Rev1.qxp_IB 17/10/2017 12:10 Page 1

The use of any electrical appliance requires the following common sense safety rules.

Please read these instructions carefully before using the product.

Important safety instructions

•WARNING: Disconnect from the mains supply

before carrying out any routine maintenance.

•

This appliance can be used by children aged from

8 years and above and persons with reduced

physical, sensory or mental capabilities or lack of

experience or knowledge if they have been given

supervision or instruction concerning use of the

appliance in a safe way and understand the

hazards involved.

•Children shall not play with the appliance.

•

Cleaning and user maintenance shall not be made

by children without supervision.

•

Keep the iron and its cord out of reach of children

less than 8 years of age at all times.

•The iron must not be left unattended while it is

connected to the supply mains.

•The plug must be removed from the socket before

filling the iron with water.

•The iron must be used and rested on a stable

surface.

•When placing the iron on its heel, ensure that the

surface on which the heel is placed is stable.

•The iron is not to be used if it has been dropped, if

there are visible signs of damage or it is leaking.

•The filling aperture must not be opened during use.

•Do not operate with a damaged grommet, it must

be replaced by the manufacturer, its service agent

or similarly qualified person in order to avoid a

hazard.

RN305000 MUK Rev1.qxp_IB 17/10/2017 12:10 Page 2

•

CAUTION - HOT: Burns can occur from

touching hot parts.

•

WARNING: Do not discharge the steam

towards people or animals. Danger of

scalding.

•WARNING: To avoid electric shock, do not

immerse appliance in water / liquid.

• WARNING: Misuse of the appliance could cause

personal injury.

Electrical requirements and mains cable

•Check that the voltage on the rating plate of your

appliance corresponds with your house electricity

supply which must be A.C. (Alternating current).

•Do not let the mains lead come into contact with the

hot soleplate of the iron.

•Should the fuse in the mains plug require changing,

a 13 amp BS1362 fuse must be fitted.

•WARNING: This appliance must be earthed.

PLEASE READ ALL INSTRUCTIONS AND KEEP

FOR REFERENCE

Important safety instructions ........................................................

Electrical requirements ..................................................................

Steam iron overview / Features .....................................................

Digital display overview ...................................................................

Temperature guide ..........................................................................

Before first use ................................................................................

Location ...........................................................................................

Usage tips ........................................................................................

Using the iron ..................................................................................

Features ...........................................................................................

Maintaining your iron ......................................................................

Troubleshooting ..............................................................................

Guarantee ........................................................................................

Contents

7 & 8

RN305000 MUK Rev1.qxp_IB 17/10/2017 12:10 Page 3

(1) On-off / temperature decrease button

(2) Temperature increase button

(3) Auto Steam button

(4) Water spray button

(5) Crease light button

(6) Power cord

(7) Controls

(8) Iron handle

(9) Cable pivot

(10) Digital display (see page 5)

(11) Steam trigger

(12) Filling cap

(13) Self clean button

(14) Iron heel

(15) Crease light

(16) Water spray nozzle

(17) Water tank

(18) Soleplate

Steam iron overview

93 4 5

RN305000 MUK Rev1.qxp_IB 17/10/2017 12:10 Page 4

Digital display (10) overview

Temperature setting indicators (19)

The temperature indicators correspond with the

International Textile Care Labelling Code as

shown on the labels of your garments (see

‘Temperature guide’ on page 6).

Steam level indicators (20/21/22)

The steam level is automatically adjusted to suit

the selected temperature setting. The steam

level indicators change when you select your

desired temperature level.

Self Clean indicator (23)

This indicator will illuminate when the system

requires cleaning.

Auto shut-off indicator (24)

This indicator illuminates if the appliance has

entered auto shut-off mode after not being

used or moved for 1 minute if sat horizontally,

or 8 minutes if stood upright on its heel.

High steam

level indicator

Medium steam

level indicator

Low steam

level indicator

Tem p e r ature

setting indicators

23 Self clean

indicator 24 Auto shut-off

indicator

RN305000 MUK Rev1.qxp_IB 17/10/2017 12:10 Page 5

Remove all packaging and any protective cover from the soleplate (18), if any. Unwind and straighten the

power cord (6).

We recommend for first time ironing that you iron over an old towel.

Stand the iron on its heel (14) and locate it on the iron rest plate of your ironing board (if large enough) or

on a heat resistant stand at the same height as your ironing board or below it. Always ensure the iron is on

a firm surface when ironing.

WARNING: Do not use the product on a surface which could be damaged by heat or steam such as

a worktop or a polished wood surface.

If in doubt, contact Morphy Richards.

Unwind and straighten the power cord (6).

Textiles and clothes carry ironing instructions. If not, follow the temperature guide above, but test the

temperature by ironing the hem of the garment or other discreet area first.

It is advised to begin with ‘cool’ fabrics (see above) and work up to higher settings. An iron heats up

quicker than it cools down so you’ll save time.

If you turn the temperature level down from a hot setting to a cooler setting, wait until the temperature

setting indicator (19) stops flashing (indicating the correct temperature has been reached) before you

continue ironing.

Location

Usage tips

Before first use

Heat setting markings on the temperature dial of all Morphy Richards irons match those of the International

Textile Care Labelling Code

Temperature guide

Symbol (120°C Max) Cool (160°C Max) Warm (210°C Max) Hot MAX setting

Temperature level

settings

Do not iron • •• •••

Fabric ylon, Acetates,

synthetic fabrics

Wool, Polyester

mixtures

Cotton, Linen

Rayon, Rayon

mixtures

Ironing Iron on wrong side,

if moisture

required, use

damp cloth

(not Acetate)

Fabrics requiring

this setting usually

require steam

pressing.

Steaming

Without steam

Steam level setting

(see step 5 of

‘Using the iron’

on page 8)

o steam

(see ‘Dry ironing’

on page 9)

Low Medium / High High

RN305000 MUK Rev1.qxp_IB 17/10/2017 12:10 Page 6

Using the iron

1) Filling the tank

Make sure the iron is not plugged in. Fill the water tank (11) via the filling hole (6) to the MAX graphic on

the side of the water tank, this shows the MAX level of water that the tank can hold and should be

checked whilst filling and the iron is tilted.

TO PROLONG THE LIFE OF THIS IRON, WE RECOMMEND A MIX OF 50% TAP WATER AND 50%

DISTILLED, DEIONISED OR DEMINERALISED WATER, ESPECIALLY IN HARD WATER AREAS.

Never use battery topping up fluid or water containing any substances like starch, sugar, fragrant

additives or defrosted water from a refrigerator.

OTE: Please see point 2 of ‘Exclusions’ on page 12.

Re-filling during use

If the water level is too low, the unit will not produce steam. If this happens, open the filling cap (12) and

refill with water.

Plug the appliance into a mains outlet, a beep

will be heard. Press the on-off / temperature

decrease button (1) to switch the product on.

The 1-dot temperature setting indicator (19) on

the digital display (10) will flash until the

temperature is reached, at which point the 1-dot

temperature setting indicator will remain

constant and two beeps will be heard.

If a different temperature is required to suit the

garment (see ‘Temperature guide’ on page 6),

you may adjust the temperature as follows:

press either the temperature increase (2) or

temperature decrease button (1) repeatedly

until the required temperature setting indicator

(19) is displayed.

2) Temperature Selection 3)

Dot 1 Dot 2 Dot 3 Max

The appropriate temperature setting indicator (19)

will flash until the desired temperature is reached,

at which point two beeps will be heard. Begin

ironing when the temperature indicator

illuminates constantly. If you turn the temperature

down, wait until the temperature indicator stops

flashing before continuing ironing.

WARNING: Keep hands and body away from

the hot soleplate (18).

NOTE: The temperature setting will reset

between each use. When the iron is plugged in

it will require switching on and the required

temperature selecting.

RN305000 MUK Rev1.qxp_IB 17/10/2017 12:10 Page 7

To help remove stubborn creases, you may

use the water spray function. Aim the water

spray nozzle (16) at the difficult area on the

garment and firmly press and hold the water

spray button (4).

Pressing the water spray once will dispense a

set amount of water.

The steam level is automatically adjusted to

suit the selected temperature setting. This is

denoted by the steam level indicators

(20/21/22) on the digital display (10), which

will change along with the temperature setting

indicators (19) when you select your desired

temperature level.

To activate the steam pump and have steam

constantly emitted from the soleplate (18)

during ironing, press the Auto Steam button

(3). The steam level indicator will flash

indicating that the pump is operating and

steam is being produced. To stop the pump

producing steam, press the Auto Steam

button again, the steam level indicator will

stop flashing and remain constantly

illuminated.

We recommend switching off the steam when

resting the iron on its heel. This is to slow the

water usage down and save time on refilling.

5) Auto Steam button 6) Steam boost

Using the iron (continued)

7) Water spray

When you have finished ironing, turn off the

appliance by pressing and holding the on-off /

temperature decrease button (1) for two seconds.

Two beeps will be heard and all indicators on the

digital display (10) will switch off.

Disconnect the plug from the mains outlet.

8) Switching off

The steam boost function is ideal for relaxing the

fibres of tougher fabrics (like jeans and linen)

and getting rid of those stubborn, hard to reach

creases.

To produce an extra boost of steam during

ironing, press and hold the steam trigger (11).

OTE: Steam cannot be produced on the 1-Dot

setting - this is highlighted by no steam level

indicators (20/21/22) being visible on the digital

display (10) whilst the 1-Dot setting is selected

OTE: For optimum steam quality, do not

operate the shot more than three times in

succession

RN305000 MUK Rev1.qxp_IB 17/10/2017 12:10 Page 8

Features

Crease light

To enable clearer vision in difficult to see areas,

press the crease light button (5) to switch on the

crease light (15), press again to switch off.

Dry ironing

To use your iron as a dry iron only, follow steps 2,

3, and 4 of ‘Using the iron’ on page 7. Do not

press the Auto Steam button (3) to operate the

steam pump. You do not need to put water in the

water tank (17).

Vertical steam

Vertical steam is useful for removing creases from

hanging clothes, curtains, upholstery, etc. Hold

the iron between 1cm and 2cm away from the

item and press the steam trigger

(11)

Hold the iron vertically and turn on the Auto

Steam function for a constant flow of steam.

Simply allow the steam to pass lightly over the

item of clothing in question to help the creases

soften away. To generate a powerful shot of steam

for stubborn creases, press the steam trigger. You

can also use vertical steaming to clean and

refresh the upholstery around your home.

WARNING: Do not use the vertical steam

feature on clothes that are being worn.

Auto shut-off

the iron is not moved

or any buttons on the

controls (7) are unused for 1 minute if sat

horizontally, or 8 minutes if stood upright on its

heel, the product will automatically turn off for

safety and to save energy. When this happens,

the auto shut-off indicator (24) will flash and beep

once.

To restart, either move the iron or press any

buttons on the controls (7) and wait for the

temperature to rise again.

OTE: The appliance is not turned off completely

in auto shut-off mode. To switch the product off,

press and hold the on-off / temperature decrease

button

(1)

until all indicators in the digital display

(10)

extinguish, then unplug the product from the

mains outlet.

RN305000 MUK Rev1.qxp_IB 17/10/2017 12:10 Page 9

Emptying and storing

When you have finished ironing, p

ress and hold

the on-off / temperature decrease button (1) to

switch the product off, then

unplug and empty

all water from your iron. When cool, store the

iron on its heel

(14)

with the power cord

(6)

wrapped loosely around the heel.

OTE: Please see point 3 of ‘Exclusions’ on page

Cleaning the soleplate

To clean a coated soleplate

Do not use scouring powder or solution as this

could cause damage to the coating.

If any man-made fibres fuse to the soleplate (18),

set the iron at the MAX setting and pass it over a

clean piece of cotton to draw the deposit off the

surface.

To clean the exterior

Allow the unit to cool and wipe over with a damp

cloth and mild detergent, then wipe dry.

Removing limescale

our iron has a built in self clean system

designed to keep the water valve, steam

chamber and steam vents clear of lint and

loose mineral deposits.

When the self clean icon (23) appears on the

digital display (10), the self clean function must

be operated.

1Half fill the iron with water.

2Connect to a mains supply outlet.

3Set the temperature to the MAX setting. Wait for

the temperature to be reached - the temperature

setting indicator

(19)

with illuminate constantly.

ress and hold the on-off / temperature

decrease button (1) to switch the product off

5Disconnect the iron from the mains supply outlet.

6Whilst the iron is still very hot, hold the iron

horizontally over a sink.

CAUTION: The soleplate will still be hot, so

ensure the power cord and plug are kept away

from it and the sink.

7Press and hold the self-clean button

(13)

WARNING: Steam and boiling hot water will

drain from the holes in the soleplate. Keep

hands and body away from the hot water. This

washes away the scale and minerals that have

built up inside the steam chamber.

Whilst still holding the self-clean button, gently

move the iron back and forth until the water tank

is empty.

When steam and hot water ceases to be

released from the soleplate, release the

self-clean button.

When the process is complete, re-connect to a

mains supply outlet, switch on and allow to heat

up - this will dry the soleplate.

11 Disconnect the iron from the mains supply outlet.

Rest your steam iron on its heel

(14)

and allow to

fully cool down.

Wipe the soleplate with a cold, damp cloth.

After this cleaning operation, empty out any

remaining water.

IMPORTANT: Do not attempt to descale the

soleplate with descaling products.

Maintaining your iron

RN305000 MUK Rev1.qxp_IB 17/10/2017 12:10 Page 10

Table des matières

Autres manuels Morphy Richards Fer

Morphy Richards

Morphy Richards IB40702 Manuel utilisateur

Morphy Richards

Morphy Richards Steam Generator ironing system Manuel utilisateur

Morphy Richards

Morphy Richards Precise Steam Plus Manuel utilisateur

Morphy Richards

Morphy Richards SEMI-ELECTRONIC 40715 Manuel utilisateur

Morphy Richards

Morphy Richards Breeze 40310 Manuel utilisateur

Morphy Richards

Morphy Richards breeze Manuel utilisateur

Morphy Richards

Morphy Richards Precise Steam Iron Manuel utilisateur

Morphy Richards

Morphy Richards ELITE STEAM GENERATOR - REV 1 Manuel utilisateur

Morphy Richards

Morphy Richards easyCHARGE 303250 Manuel utilisateur

Morphy Richards

Morphy Richards Comfigrip Advanced 40715 Manuel utilisateur

Morphy Richards

Morphy Richards Jet Stream Series Manuel utilisateur

Morphy Richards

Morphy Richards VAPOCARE Manuel utilisateur

Morphy Richards

Morphy Richards IB42345 Manuel utilisateur

Morphy Richards

Morphy Richards IB4060X Manuel utilisateur

Morphy Richards

Morphy Richards Steam Generator Manuel

Morphy Richards

Morphy Richards ORBIT TRAVEL 41540 Manuel utilisateur

Morphy Richards

Morphy Richards 40684 Manuel utilisateur

Morphy Richards

Morphy Richards TURBOSTEAM IRON - MANUAL 2 Manuel utilisateur

Morphy Richards

Morphy Richards IB40614 Manuel utilisateur

Morphy Richards

Morphy Richards ECOLECTRIC 40652 Manuel utilisateur

Morphy Richards

Morphy Richards breeze Manuel utilisateur

Morphy Richards

Morphy Richards Turbosteam Manuel utilisateur

Morphy Richards

Morphy Richards SEMI-ELECTRONIC IRON RN40692 Manuel utilisateur

Morphy Richards

Morphy Richards Turbosteam Manuel utilisateur

Manuels Fer populaires d'autres marques

Clatronic

Clatronic DB 3703 Manuel utilisateur

TEFAL

TEFAL FV4093Z0 Manuel utilisateur

Gorenje

Gorenje SIH 2200 BS Manuel utilisateur

Philips

Philips GC6012 Manuel utilisateur

Bosch

Bosch 2 Series Manuel utilisateur

Riffel

Riffel Catena KB-819 Manuel utilisateur

Texi

Texi Hestia Manuel utilisateur

Maxwell

Maxwell MW-3010 Manuel utilisateur

TREVIDEA

TREVIDEA Girmi ST60 Manuel utilisateur

Philips

Philips HI5914/30 Manuel utilisateur

Primula

Primula Vapormat Manuel utilisateur

Magio

Magio MG-541 Manuel utilisateur

Scarlett

Scarlett SC-1334S Manuel utilisateur

Bosch

Bosch Sensixx B22L Manuel utilisateur

Philips

Philips GC651 Manuel utilisateur

Vitek

Vitek VT-1247 VT Manuel utilisateur

Cleanmaxx

Cleanmaxx 3397 Manuel utilisateur

Philips

Philips GC800 Manuel utilisateur