USER GUIDE
06
ASSEMBLY INSTRUCTIONS
1. Check you have each part that is needed to
assemble the Chimenea.
2. Start by attaching the 3 legs (1) to the base (2)
using the screws (17) provided.
3. Now, screw the 3 brackets (5) in place, as shown
in the diagram. Screw them in place by using
three of the screws (17) and three nuts (18).
4. Attach the air vent (3) underneath the door frame
indent in the base (2) on the right side, and then
the air vent lock (4) on the le side, using the
screws (17) and nuts (18) provided.
5. Place the cover bowl (6) on top of the base (2),
and align the pre-made holes to line up with the
remaining holes in the brackets. Use three screws
(17) and three more nuts (18) to securely lock the
cover in place.
6. Continue by attaching the handles (7) to each
side of the chimenea. Screw the handles on tight
using the screws (17).
7. Place the 2 coal grate parts (9) together at the
bottom of the base (2).
8. Attach the mesh door frame (8) to the cover
bowl (6) by first screwing the door frame plate
(11) in place using the screws (17) and nuts (18)
provided. Then attach the mesh door frame (8)
to the plate (11) by using the long screw (16) and
the nut (19) provided.
9. Next, screw the door frame lock (10) in place with
the provided screws (17) and nuts (18).
