Monster MLB7-1037 Manuel utilisateur

INDOOR/OUTDOOR

16.4ft(5m) LED LIGHT STRIP

MODEL MLB7-1037

V1.0 0420

Operation Manual

Features

What’s Included

Introduction

• 16.4ft (5m) length - perfect for lighting decks, walkways,

gardens, and more

• Waterproof LED light strip design is safe for both indoor

and outdoor/wet environment use

• 8ft adapter cable easily reaches from outlet to the

desired location

• Included mounting clips and screws for easy installation

• Multi-color/multi-white color changing and flash modes

• Remote control works up to 26 feet away

This 16.4ft(5m) Indoor/Outdoor LED Light Strip light is

ideal for edge-lighting your deck or railings, or highlighting

gardens and walkways, and gives you the look of

professional lighting while enhancing the style and safety

of your outdoor living spaces.

• 16.4ft (5m) Indoor/Outdoor Led Light Strip

• IR Remote Control

• Mounting Clips x10 (screws x20)

• User Manual

• Keep these instructions.

• Do not drop, puncture, or disassemble this product.

• The plug on the power supply unit must be connected

to a GFCI protected hooded flush type cover plate

receptacle marked “Wet Location” while in use outdoors.

• This LED light strip is suitable for use in wet locations.

DO NOT SUBMERGE THE STRIP OR THE POWER

SUPPLY UNIT IN WATER.

• This product has a polarized plug and will only fit in a

polarized outlet. Do not attempt to defeat this safety

feature. Do not alter the plug.

Please read and understand all instructions before using

this product. If damage is caused by failure to follow the

instructions, this warranty is null and void.

Safety

Instructions

• Use only with an extension cord rated for outdoor use.

Use only three-wire outdoor extension cords that have

three-prong grounding plugs and grounding receptacles

that accept the appliance’s plug. Never use with an

extension cord unless the plug can be fully inserted.

WARNING: When using outdoor use products, basic

safety precautions should always be followed to

reduce the risk of fire, electric shock, and personal

injury, including the following:

• Do not expose this product to open flames or use near fire.

• Do not use the product in a strong magnetic field.

• Use a clean, soft cloth to clean. Do not use any corrosive

cleaners/oils to clean.

• Do not attempt to repair the device or open the unit as this

will void the warranty.

Specifications

• light strip length: 16.4ft (5m)

• cable length:

8ft (2.4m) to power supply + 1.5ft (.5m) to plug

• input: 12V 0.42A

• output: 12V 1A

• remote control: 1 x 3V battery, type CR2025

NOTE: You cannot connect additional light strips to this

product.

NOTE: If desired, you can cut the light strip to shorter

lengths by cutting on the designated scissors marks.

However, IF THE PRODUCT HAS BEEN CUT IT

WILL NO LONGER BE WATER PROOF.

Get Started

Determine where you will install the Indoor/Outdoor

LED Light Strip. Make sure the location is close

enough to a power source for the cord to reach

without becoming a tripping hazard.

2Using the included mounting clips and screws, mount

the Light Strip in the desired location. For best results

place one clip approximately every 20”, or 5 scissors

marks, to secure the entire light strip evenly.

Note: Move some mounting clips closer to corners to better

secure the strip around turns, use fewer on straight areas.

Once installed, connect the power adapter to a powered

outlet. (Outdoors this must be a GFCI protected outlet.)

Remove the protective tab from the battery compartment

of the remote. You are now ready to use your product.

x5 (20”)

TIP: If the power adapter doesn’t reach to the

ground from the outlet, use the keyhole hanger

and a screw or nail to hang it.

MODEL MLB7-1037

V1.0 0420

Operation Manual

①

②

③

④

⑤

⑥

⑦

⑧

Controls, at a Glance

ON/OFF

MULTI-WHITE SELECTORS

MULTI-COLOR SELECTORS

FLASH

STROBE

FADE

SMOOTH

RESET

DIMMER BUTTONS

⑥

Turn the product on and off

Select from cool, soft, or warm white

Change the color to match your mood

Flash color-changing mode

Strobe color-changing mode

Fade color-changing mode

Smooth color-changing mode

Reset to default settings

Adjust the brightness/intensity

④ ⑤ ⑥ ⑦

⑧

⑥

①

②

③

IR Remote IR Receiver

(on adapter housing)

IR Remote

Operation

Turn on the Indoor/Outdoor LED Light Strip by

pushing the ON button on the remote control.

(It will turn on into the last used lighting mode.)

3Set the desired brightness using the buttons to

increase/decrease the intensity of color.

Select the desired color or effect by pushing

the corresponding button on the remote control.

4Push the OFF button to turn off the Light Strip.

The battery compartment is located on the narrow

side of the remote control.

3Place the battery compartment back in the remote

control so it locks in place.

Remove the empty battery and insert a 3V battery, type

CR2025, with the positive terminal pointing upwards.

Changing the remote control battery:

Note: The battery for the remote control has already been

installed. Remove the battery pull tab to operate.

Note: For best operation, point the IR remote towards

the IR Receiver (towards power adapter).

Note: You can use this Light Strip with a timer outlet or smart

plug as it will power on into the last used lighting mode.

Notice

FCC Compliance

This device complies with Part 15 of the FCC. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference,

and (2) this device must accept any interference received, including

interference that may cause undesired operation. Changes or modifications

not expressly approved by the party responsible for compliance could void

the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates uses and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Statement

To satisfy FCC’s RF exposure requirements, a separation distance of 20 cm

or more should be maintained between the antenna of this device and

persons during device operation. To ensure compliance, operations at closer

than this distance is not recommended.

Warning

Changes or modifications not expressly approved by the party responsible

for compliance could void the user’s warranty or authority to operate the

equipment.

The M Monster logo is a registered trademark of Monster, Inc. or its

subsidiaries in the U.S. and other countries and is used under license.

Licensed and Manufactured by Jem Accessories, Inc. Edison, NJ 08817

Made in China

Please call for customer support 866-246-2008

Customer

Service

866-246-2008

In the event this product becomes defective,

please do not return this product to your retailer.

Limited

Warranty

If something goes wrong with your product call us toll free at

866-246-2008 for details on how to return your product.

How Do You Get a Replacement?

Any problem that is caused by abuse, misuse, commercial use, exposure

to heat, bright light, sun, liquids sand and other contaminates, contact with

solvents or cleaners, malfunctions caused by other audio equipment or an

act of God (such as a flood) is not covered. Also consequential and

incidental damages and costs of removal or installation is not covered

under this warranty. Some states and countries do not allow the exclusion

of limitation of incidental or consequential damages, so these limitations or

exclusions may not apply to you.

What This Warranty Will Not Cover?

Monster will repair or replace the product for any defective or malfunctioning

product at no charge.

What Will Monster Do?

This warranty lasts as long as you own your Monster product. Coverage

terminates if you sell or otherwise transfer it.

How Long Does the Coverage Last?

This warranty covers any defect or malfunctions in a new Monster product

that you have purchased from an authorized Monster dealer and that comes

with this warranty statement.

What Does This Warranty Cover?

Table des matières

Autres manuels Monster Lampe de travail

Monster

Monster SMART ILLUMINESSENCE ORB Manuel utilisateur

Manuels Lampe de travail populaires d'autres marques

ANSMANN

ANSMANN POWERLIGHT 5.1 Manuel utilisateur

RTRMAX

RTRMAX RTX1868 Manuel utilisateur

FeinTech

FeinTech LAL00220 Manuel utilisateur

Bunker Hill Security

Bunker Hill Security 64735 Manuel utilisateur

Goobay

Goobay 30450 Manuel utilisateur

REV Ritter

REV Ritter SPOT Manuel utilisateur

Ignition

Ignition Stagepix Line 100 IP Manuel utilisateur

SCANGRIP

SCANGRIP DUO CONNECT Manuel utilisateur

Bosch

Bosch GLI 18 V Manuel utilisateur

Bayco

Bayco SL-1514 Manuel utilisateur

EUFAB

EUFAB SMD LED 8+1 Manuel utilisateur

DeWalt

DeWalt DCL510 Manuel utilisateur

PowerSmith

PowerSmith PWLD080T Manuel utilisateur

MaxLite

MaxLite 73683 Manuel utilisateur

Heitronic

Heitronic Trend 27867 Manuel utilisateur

Monzana

Monzana Gore MZCL10 Manuel utilisateur

EINHELL

EINHELL TE-CL 18/2000 LiAC Manuel utilisateur

Bayco

Bayco NIGHTSTICK Dual-Light Xtreme Lumens... Manuel utilisateur