Monster Grill MG5BBQSS Manuel utilisateur
OWNER’S MANUAL
MG5BBQSS
GAS GRILL WITH 5 MAIN BURNERS WITH SIDE BURNER AND
INFRARED SIDE BURNER
2
CONTENTS
Important Safety Information
3
General Information for Successful Assembly
3
Parts Listing
4
Assembly
6
Gas Supply Information
13
Connecting the gas bottle to the appliance
13
Checking for leaks
14
Lighting Instructions
14
Safely using your BBQ
15
Flare-up Control
15
Fat Fires
15
Cleaning and Care
16
Outside Surface
16
Interior of the BBQ
16
Cooking Grid
16
Cleaning the Burners
16
Storage of the Appliance
16
Technical Information
17
Troubleshooting
18
Manufacturer Support
18
3
IMPORTANT SAFETY INFORMATION
Please read this user manual before using this BBQ and keep it safe for future reference.
⚫Read the following instructions carefully
and be sure your BBQ is properly installed,
assembled and cared for. Retain the
instructions for future reference.
⚫Failure to follow these instructions may
result in serious bodily injury and/or
property damage.
⚫WARNING - Risk of Suffocation! BBQ’s
must be used outdoors and must not use in
enclosed areas such as sheds or marquees!
⚫Read the instruction manual before using
the appliance.
⚫WARNING: Accessible parts may be very
hot. Keep young children away.
⚫Wear heat proof gloves whilst operating
the appliance.
⚫This appliance must be kept away from
flammable materials during use.
⚫Do not move the appliance during use.
⚫Turn off the gas supply at the gas cylinder
after use.
⚫Do not modify this appliance.
⚫If you have any questions concerning
assembly or operation, consult the retailer
or Bottled Gas Company.
⚫Always place the appliance and cylinder on
flat level ground.
⚫Never light the appliance with the hood in
the closed position.
⚫Your BBQ can be used with gas cylinders
between 5 kg and 15 kg. The maximum
size is 320mm (Diameter) x 600mm
(Height). Your BBQ will perform better if
propane or LPG mixtures are used. Butane
can be used but because of the power of
this appliance the cylinder may tend to
freeze and supply gas at reduced pressures
affecting the performance of your BBQ.
⚫Use a suitable regulator that is certified to
BS EN 12864 or EN 16129.
⚫When positioning the BBQ the following
clearances must be obeyed:
Sides and rear of appliance: 1 METRE
FROM ANY OBSTRUCTION.
Above the appliance: NO OVERHEAD
OBSTRUCTION ARE PERMITTED.
⚫Please turn off the gas cylinder if gas leak is
suspected.
⚫Parts sealed by the manufacturer must not
be altered by the user. No modifications
should be made to any part of this BBQ and
repairs and maintenance should only be
carried out by a registered Gas Safe service
engineer.
⚫Do not use the barbeque in confined
and/or habitable space e.g. houses, tents,
caravans, motor homes, boats. Danger of
carbon monoxide poisoning fatality.
⚫WARNING! This barbeque will become
very hot, do not move it during operation.
⚫WARNING! Do not use spirit or petrol for
lighting or re-lighting! Use only firelighters
complying to EN 1860-3.
⚫WARNING! Keep children and pets away.
GENERAL INFORMATION FOR
SUCCESSFUL ASSEMBLY
Please read the assembly instructions carefully and follow the safety precautions. Allow
sufficient time for assembly. Before starting assembly, clear an area measuring
approximately two to three square metres. Remove the item from the packaging and lay out
all of the parts and any necessary tools so that they are within easy reach. Only tighten all of
the screw connections firmly when you have finished assembly or are instructed to within
the manual. Otherwise this can result in unwanted tension and instability.
4
PARTS LIST
Ref
Description
Image
Qty
1
Warming
Rack
1
2
MFCS System
1
3
Flame Tamer
5
4
Fuse Board
4
5
Main Burner
5
6
Hood
1
7
Grease Tray
1
8
Right Side
Burner Trivet
1
9
Right Side
Burner
1
10
Barbecue
Body
1
11
Electrode
Wire
1
12
Right Side
Burner Valve
Assembly
1
13
Right Side
Burner Fire
Bowl
1
14
Electrode
1
15
Right Side
Shelf
1
16
Control Dial
Bezel
7
17
Dial
7
18
Cart Right
Side Panel
1
19
Cart Right
Front Column
1
20
Cart Bottom
Panel
1
21
Locking
Castor
2
22
Non-Locking
Castor
2
23
Cart Left
Door
1
24
Cart Right
Door
1
25
Cart
Horizontal
Bar
1
26
Cover Magnet
2
27
Cart Back
Panel
1
28
Cart Left Side
Panel
1
29
Left Side
Burner Valve
1
30
Grease Cup
Hanger
1
31
Cart Left
Front Column
1
32
Grease Cup
1
33
Ignition Road
and Chain
1
34
Left Side
Shelf
1
35
Left Side
Infrared
Burner
1
36
Infrared
Burner
Cooking
Grate
1
37
Baffle Plate
1
38
Left Side
Infrared
Burner Fire
Bowl
1
39
Cylinder
Support Plate
2
40
Caster
Support Plate
4
41
Pulse Igniter
Cover Plate
1
Note: #2 cooking grate may refer to cooking grate or cooking griddle according to model.
5
FIXTURES AND FITTINGS
Ref
Description
Image
Qty
AA
M6x16
8
BB
M6x14
40
CC
M6x10
16
DD
D8
4
EE
M4x10
16
FF
M5x12
20
EXPLODED DIAGRAM OF PARTS
6
ASSEMBLY
Step1:
Secure 16 CC screws to
the four castors.
Step 2:
Attach the cylinder floor
plates and castors onto
the base using 12 FF x 20
screws.
Step 3:
Turn the base over so
that the castors are on
the floor. Attach the side
panel onto the base using
two BB screws.
7
Step 4:
Repeat this step for the
other side panel and then
attach the door stop (37)
to the base using two EE
screws.
Step 5:
Attach the back panel
onto the base and two
side panels using seven
BB screws.
Step 6:
Use five BB screws to
secure the corner panel
to the side panel and
base.
8
Step 7:
Using 5 BB screws, attach
the second corner panel
to the base.
Step 8:
Slide the two front
panels 23 and 24 into the
space between the two
corner panels. Secure
them into place using
five BB screws.
Step 9:
Secure the top of the BBQ
unit to the assembled
base using four BB
screws. Ensure it is
secure before
commencing.
9
Step 10:
Open the BBQ lid and
secure the side shelf (15)
to the main BBQ body
using 2 DD washers and
2 BB screws.
Step 11:
On the outside of the
main unit, use four AA
screws and two BB
screws to further secure
the side shelf.
Step 12:
Secure the left shelf to
the side of the main unit
using two DD washers
and two BB screws.
10
Step 13:
On the outside of the
main unit, use four AA
screws and two BB
screws to further secure
the side shelf.
Step 14:
Use two EE screws to
secure the dial onto part
29.
Step 15:
Use two EE screws to
secure the dial onto part
12.
Table des matières
Autres manuels Monster Grill Gril
