Copyright© 2018 Mod-U-Blast®, All Rights Reserved
Horizontal Filter Dust Collector Owner’s Manual
3
TO DISTRIBUTORS, PURCHASERS AND END USERS OF MOD-U-BLAST PRODUCTS
The information provided described and illustrated in this material is intended for experienced, knowledgeable users of abrasive
blasting equipment and supplies(products).
The products described in this material may be combined as determined solely by the user in a variety of ways and purposes. However
no representations are made as to intended use, performance standards, engineering suitability, safe practices or compliance with
government regulations and laws that apply to these products, products of others, or a combination of various products chosen by the
user or others. It is the responsibility of the users of these products, products of third parties, and a combination of various products, to
exercise caution and familiarize themselves with all applicable laws, government regulations and safety requirements.
Nor are representations made or intended as to the useful life, maintenance cycles, efficiency or performance of the referenced prod-
ucts of any combination of products. This material must not be used for estimating purposes. Production rates, labour performance or
surface finishes are the sole responsibility of the user based on the
user’s expertise, experience and knowledge of industry variables.
It is the responsibility of the user to insure that proper and comprehensive training of operators has been performed and all environmen-
tal and safety precautions observed.
Mod-U-Blast Inc. provides a variety of excellent products to the surface preparation industry, and we are confident that all proficient
users, operators and contractors in this industry will continue to use our products in a safe and knowledgeable manner.
Before using this product, read all instructions, literature, labels, specifications and warnings sent with and affixed to the unit.
If operation of the unit is unclear after reading this manual, contact your supervisor for instructions. It is the responsibility of the
employer to read the following instructions to users of this equipment. Periodic inspection at the work site should be made by
supervisory personnel to ensure the blast machine is being properly used and maintained. A copy of this owner’s manual must be kept
with the blast machine and readily accessible to the blast machine operators at all times.
It is the responsibility of the user to insure that proper and comprehensive training of operators has been performed and all
environmental and safety precautions observed.
Important Notice
