Mobileye 8 Connect Manuel
Technical Installation Guide (4G) v1.7 www.mobileye.com
63 Mobileye 8 Connect
Mobileye 8 Connect
Technical user guide (4G) v1.9
November
Technical Installation Guide (4G) v1.9 www.mobileye.com
1 Mobileye 8 Connect
Table Of Contents
Table Of Contents 1
1. Warnings 4
1.1 General 4
1.2 Installation & Safety Instructions 5
2. Components Overview 6
3. Software download & installation 8
4. Connection Scheme 9
4.1 CAN-bus Installation Scheme 9
4.2 Mixed Installation Scheme (Analog + CAN-bus) 9
Analog Installation Scheme 10
5. Connection Description 11
5.1 Intro 11
5.2 Main unit connections (CAB000400 Rev3.3) 11
5.3 Mobileye 8 Connect signals cable (CAB000371 Rev6.3) 11
5.4 Ferrite 13
5.4.1 Ferrite for Power Sources -Model 1 (ITM000786) 13
5.4.2 Instructions for power sources (CAB000371) 13
5.4.3 Ferrite for Power Sources -Model 1 (ITM000777) 14
5.4.4 Instructions for power sources (CAB000371) 14
5.5 EyeWatch 3 – display and control unit (CAB000087) -OPTION 1 15
5.6 EyeWatch 8 – display and control unit (CAB000401) -OPTION 2 15
5.7 CAN Reader – CAB000302 16
5.8 EyeNET – (EYENET0001 / CAB000613) 16
6. Connection Description 17
6.1 Site preparation 17
6.2 Vehicle signals connections 17
6.3 EyeWatch Installation 18
6.4 Mobileye 8 Connect main unit (camera) installation 19
6.5 Installing the Mobileye 8 Connect 4G modem 21
Technical Installation Guide (4G) v1.9 www.mobileye.com
2 Mobileye 8 Connect
7. 4G Cable Ferrite Installation 22
7.1 Instructions for 4G cable Ferrite installation 22
7.2 Mobileye 8 Connect 4G Connection Scheme 23
8. Installation & Calibration 24
8.1 Back-Cover removal 24
8.2 Communication / Connection phase 25
8.3 System Calibration 26
8.3.1 Login 26
8.3.2 Login 27
8.3.3 Vehicle Selection 29
8.3.4 Connection to SeeQ 30
8.3.5 Vehicle Information 31
8.3.6 Vehicle Information 32
8.3.7 Analog Installation 33
8.3.8 Signal Test 34
8.3.8.1 Signal Test Troubleshooting 35
8.3.9 Calibration 36
8.3.9.1 Step 1 – TAC assembly 36
8.3.9.2 Step 2 – Camera attachment 37
9. GPS attachment 38
9.1 Step 3 – GPS attachment 38
9.2 GPS attachment location allowed areas 39
10. Step 4 – Measurements 40
11. Step 5 – Camera angle adjustment 44
11.1 Step 6 – Car hood 45
11.2 Step 7 – Calibration 45
12. Validation 48
10.1 General 48
10.2 Operation 48
13. Appendix A – 4G Modem 50
13.1 Modem Status 50
Technical Installation Guide (4G) v1.9 www.mobileye.com
3 Mobileye 8 Connect
13.2 Technical Spec 51
14. Appendix A – CAN Reader 52
14.1 General 52
14.2 CAN Reader installation (CAB000302) 52
15. Appendix B – up/down configuration 53
15.1 General 53
16. Appendix C – EyeNET Holder (ASY000451) 56
16.1 Intro 56
16.2 Component Overview 56
16.3 Assembly 56
17. Appendix D – Calibration Tool 58
17.1 Intro 58
17.2 Instructions 58
18. Troubleshooting 60
19. Technical Specification 61
19.1 Mobileye® 8 connect™ – 4G | Technical Specification Sheet 61
19.2 Mobileye® 8 connect™ – 4G | Display unit Specification Sheet 0
19.3 Mobileye® 8 connect™ – 4G | Cellular Module Specification Sheet 1
19.4 Mobileye® 8 connect™ – 4G | GNSS Technical Specification 2
19.5 Mobileye® 8 connect™ – 4G | Certificates 2
Technical Installation Guide (4G) v1.9 www.mobileye.com
4 Mobileye 8 Connect
1. Warnings
1.1 General
Mobileye 8 Connect is Mobileye’s new driver assistance system, containing the latest
iteration in Mobileye’s state-of-the-art machine vision software – the EyeQ®4 system-
on-chip.
Mobileye 8 Connect alerts the driver, aurally and visually, to certain potentially
dangerous situations on the road; the greater the danger, the more ‘urgent’ the
warning.
Mobileye 8 Connect is not an automated driving system. It does not replace the driver
nor allow the driver to be any less vigilant or alert to the road than he/she would
otherwise be. It does not reduce the driver’s responsibility for driving properly, nor
his/her liability for driving improperly or unlawfully. In particular, the driver should
ensure not to be distracted from the road by the Mobileye 8 Connect display unit.
Mobileye 8 Connect works best on paved roads with clear lane markings. Even then,
Mobileye cannot guarantee 100% accuracy nor the absence of false positives
(‘seeing’ something that’s not there) or false negatives (failing to ‘see’ something that
is there), especially in adverse road or weather conditions.
Mobileye 8 Connect is designed to detect only fully visible vehicles and fully visible
pedestrians and bicycles (both in daylight and at night). It is not designed to detect
crossing, oncoming, or passing vehicles.
Do not connect any system component when vehicle power is On.
All system components must be connected before turning the system power On.
Before making the power connections, extract the Fuse from the Fuse holder and add it
back only after all system components and cables are connected and before turning the
vehicle power On.
DO NOT open the SIM card lid while system is On. Replacing the SIM card is prohibited
Technical Installation Guide (4G) v1.9 www.mobileye.com
5 Mobileye 8 Connect
1.2 Installation & Safety Instructions
Mobileye 8 Connect installation must be carried out by an authorized Mobileye 8
Connect dealer or Installer.
Do not transfer Mobileye 8 Connect to another vehicle after installation.
The Mobileye 8 Connect GSM Nano SIM card will work only with the Mobileye 8
Connect unit with which it is supplied; do not use the SIM for other purposes or with
other Mobileye 8 Connect units.
Operate Mobileye 8 Connect only with 12VDC~24VDC power.
Do not cover or obstruct the Camera Unit or Display and Control Unit.
Use proper tools.
Use only an LED voltage tester or digital multi meter. Do not use a light bulb voltage
tester.
Pay attention to unusual color cables, for example: yellow cables belong to air bags;
two twisted wires usually belong to different (digital) sensors.
Before disconnecting the battery or radio connectors make sure to have the radio
code in hand.
Do not disconnect any plug or connector in the vehicle while the car’s ignition switch
is on.
Before making the power connections, extract the Fuse from the Fuse holder and add
it back only after all system components and cables are connected and before turning
the vehicle power On.
Use protective gloves when handling the camera unit to protect against heat burns.
Technical Installation Guide (4G) v1.9 www.mobileye.com
6 Mobileye 8 Connect
2. Components Overview (* supplied in 2 separate boxes)
Package List Component Mobileye P/N
Master Camera unit
ASY0000000000805
4G Modem
PAC0000AJMODEM4G
PAC0000CHMODEM4G
PAC0000EUMODEM4G
PAC0000INMODEM4G
PAC0000NAMODEM4G
PAC0000LAMODEM4G
Display unit –
EyeWatch
EyeWatch 3
EyeWatch 8 (Optional)
ASY000130
PAC0000000000EW8
Main cable
CAB000400 Rev3.3
GPS Cable & Module
CAB000402
Signals cable
CAB000371 Rev6.3
CAN Reader
CAB000302 Rev.0.3
Technical Installation Guide (4G) v1.9 www.mobileye.com
7 Mobileye 8 Connect
External fuse holders
with 2A fuses
Fuse - ITM000205
Fuse holder (Red) -
ITM000206
Fuse holder (Blue) -
ITM000207
3M VHB Surface
Cleaner
ITM000024
Ferrite for Power
sources ITM000786 – Ring
Ferrite
Ferrite for 4G modem
ITM000788
Installer Kit
EyeNET
used for system
installation,
calibration, and
configuration
EyeNET0001
TAC
used for both the
main camera
attachment to
the
windshield
(reference point)
and for
calibration
calculation
TACS00003
The Mobileye EyeNET and TAC are not part of the Mobileye 8 Connect kit and are sold
separately.
Technical Installation Guide (4G) v1.9 www.mobileye.com
8 Mobileye 8 Connect
3. Software download & installation
Mobileye 8 Connect series uses a dedicated applications for configuration and calibration*.
The applications are part of the Mobileye Installation Center.
The software installer is available in our website under "support" tab or in the following direct
link:
https://www.mobileye.com/support/
Please make sure you have Administrator Privileges before installing the Mobileye IC application, if
not, please contact your IT department for further assistance.
To keep the most up to date version of the IC application, login with your login details to enable to
automatic update. If an update is available, follow the on-screen
Technical Installation Guide (4G) v1.9 www.mobileye.com
9 Mobileye 8 Connect
4. Connection Scheme
4.1 CAN-bus Installation Scheme
4.2 Mixed Installation Scheme (Analog + CAN-bus)
Autres manuels pour 8 Connect
1
Table des matières
Autres manuels Mobileye Accessoires automobiles
Mobileye
Mobileye 5 Manuel utilisateur
Mobileye
Mobileye Mobileye 6 Manuel utilisateur
Mobileye
Mobileye AWS-4000 Manuel utilisateur
Mobileye
Mobileye 530 Manuel utilisateur
Mobileye
Mobileye C2-270 Manuel utilisateur
Mobileye
Mobileye Mobileye 6 Manuel utilisateur
Mobileye
Mobileye C2-270 Manuel utilisateur
Mobileye
Mobileye AWS-4000 Manuel utilisateur
Mobileye
Mobileye 550 Manuel utilisateur
Mobileye
Mobileye Mobileye 6 Manuel utilisateur
