Mobilebase ds3 Manuel utilisateur
DS3 / DS31 User Manual
DSIC CO., LTD
• Please read the following warnings before using the product..
• Contents of manual may differ based on the software version of products.
•Please visit web site(www.mobilebaseglobal.com) for the more detailed information.
< Table of Contents >
Notice 2
Cautions and Instructions 3
1 Understanding the Product 5
1.1 Components 6
1.2 Closed view of product 7
1.3 Install/Remove the Battery 9
1.4 Charging the Battery 10
1.5 Using SD Memory 11
1.6 Reset(H/W and S/W) 12
2 Basic Use 13
2.1 Display Calibration 14
2.2 Using Keyboard 15
3 Communication 16
3.1 Using Wireless LAN 17
3.2 Using Bluetooth 19
4 Scanner and Camera 20
4.1 Using Barcode Scanner 21
4.2 Using Camera 22
5 Connecting ActiveSync 25
5.1 Installing ActiveSync 26
5.2 Using ActiveSync 27
5.3 Solving Problem 28
6 Technical Support 29
1
2
< Notice >
!Please read “Caution and Instruction” and conform according to the direction.
!The contents in manual could be modified without pre-notice and different according to PDA software version.
!The figure and color of components could be different with the actual.
!Unauthorized copying, transferring, or deletion is strictly prohibited.
!Microsoft, Windows, Window Logo, Windows CE 5.0 Logo, ActiveSync, Microsoft Office, Outlook and Internet
Explorer
are registered trademarks of Microsoft Corporation legally protected by law.
!This manual is protected by Copyright Laws.
3
< Cautions and Instructions >
!In order to use the product properly and safely and to prevent accidents in advance,
Please follow the guidelines indicated bleow.
User Cautions - Please use the authorized battery and accessory, which provided with PDA.
* For a defect by using a non-authorized equipment, You can not receive A/S.
- Please do not modify the product at discretion.
* It could create a fire, an injure, an electric shock and have the product damaged
* Also, You can not receive A/S for a defect, which is generated by modification.
Keeping Caution - Please don’t input an impact like drop and not use in environment with high temperature and humidity.
- Please full charge the battery before first using.
Use prohibited - Please do not use in dangerous areas explosive, such as construction, gas station, etc.
* Please accordingly observe the rule, instruction and signal in the areas.
* During refueling, Please turn off phone function for safety.
- Please prohibit using PDA and related things while driving. It could cause danger.
- Please turn off the PDA when boarding an airplane and in hospital
* Electromagnetic waves of phone function could effect a certain flying and hospital equipment.
- Please turn off the PDA in other restricted areas.
* A problem or danger of electromagnetic waves could occur.
4
< Cautions and Instructions >
Precaution
for Product
- Please don’t put PDA, battery and charger in or near heating equipment such as stove, microwave oven.
* It could bring on fatal injury. In addition, Could cause product explosion, transformation or a certain defect.
Furthermore, Free repair service is not provided.
- Please don’t use PDA with any other purpose except for the original.
Precaution
for Battery
- In case of battery that is damaged, impacted, heat and submerged, it could explode.
- You should never use a transformed or damaged battery.
- Use only original or authentic batteries and adaptors, and do not use them for applications other than those of the PDA.
(If you do otherwise there is a risk of explosion or possibilities for shorter durability of the PDA, battery, and adaptor.)
- You should use authorized adaptor and charger when charging.
If otherwise, the battery life get shortened or could be exploded.
- A damage could be occurred when you compulsory install the battery.
- You should change the battery after power-off. It causes a damage or software problem.
- Please be careful that key, coin or other metal material is not connected to battery’s terminal.
5
1 Understanding the Product
1.1 Components
1.2 Closed view of Product
1.3 Install/Remove the Battery
1.4 Charging the Battery
1.5 Using SD Memory Card
1.6 Reset(H/W and S/W)
[ DS-3 PDA ] [ Cradle ] [ Battery ] [ Stylus Pen and String ]
[ Power Cable ] [ USB Cable ] [ Ear Microphone(Options) ] [ User Manual ]
●●
6
1 Understanding the Product
1.1 Components
1.2 Closed view of Product
Status LED
(Modem/Barcode Scan)
LCD Touch Screeen
Keypad
Microphone
Voice call Speaker
Barcode scanner
button
Cradle
connector
Stylus pen
Barcode
scanner
Reset
Flash
Camera lenz
Handstrap Battery cover
Sound speaker
24-pins Connector
(Charging/Data Comm./
Connecting Cable)
7
[ PDA Body]
Volume Up / Down
Ear Microphone
jack
Barcode scanner
button
Camera
button
1.2 Basic Terms
[ Cradle ]
Charging Status LED
Connecting
Connector
Extra-Battery
Charging Part
USB
Connector
(Host)
Power
Connector
USB
Connector
(Client)
8
1.3 Install/Remove the Battery
9
①Install battery by making connector upward.
②Close battery cover
③Push the locker to left side
④Fix the hand strap on back of body.
①Separate the hand strap
②Push the locker to right side to unlock
③Pull out the battery cover by using groove
④Pull out the battery
⑤Release the battery lock and remove.
[ Install the Battery]
[ Remove the Battery]
*P.S : when battery is installed or removed, power-off should be required.
Ce manuel convient aux modèles suivants
1
Table des matières
