MIUFLY S2 PRO Manuel utilisateur
MIUFLY S2 PRO Body Camera
User Guide
Supporting Website:
www.miuflybodycamera.com
1
About this Guide
The content in this document is for information purpose and is subject to
change without prior notice. We have made every effort to ensure that
this User Guide is accurate and complete.
However, no liability is assumed for any errors or omissions that may
have occurred.
The manufacturer reserves the right to change the technical specification
and accessories without prior notice.
Caution
Do not expose battery being placed in high temperature environment. If
battery leaks or bulges, stop to use.
Risk of explosion if battery is placed by an incorrect type.
Dispose of used batteries according to the instructions.
Never replace the battery on your own. Doing so may cause the damage
or explosion. Please have the dealer do it for you.
Do not put the LCD displayer or lens under the sunshine.
Note
A specific emission frequency may influence the image quality.
Please try a few times of video-taking test before you formally use this
product in order to be familiar with this product.
Always full charge the battery before use.
Never dismantle, crush, or pierce the product, or allow the product to
short-circuit. Please persuade for professional assistance if the product
doesn’t work properly.
Before you start using this product, it is assumed that
you agree to the above statement.
2
TABLE OF CONTENTS
1. Introduction
Product Overview
Box contents
2. Product Diagram
3. Main Menu Optional Detail
4. Operation
5. Troubleshooting
3
1. Introduction
Product Overview
MIUFLY S2 PRO Body Camera is ruggedly designed to provides law
enforcement, security and emergency personnel with super Full HD 1512p
video recording capabilities, and one-button recording and activation. When
worn on the front of clothing, an ultra-wide 140° field-of-view lens captures
what happens in the field as accurate information for further analysis.
Featuring a 32GB (64GB) internal memory, pre-record buffering, importance
tagging, and integrated Infrared LEDS for night vision, MIUFLY S2 PRO is
equipped to perform in any conditions.
With full featured and adaptable operation, MIUFLY S2 PRO can record video
and audio simultaneously, or audio only for suspect interrogations and
victim/witness statements. MIUFLY S2 PRO is fully configurable and offers
multiple recording qualities, super full HD 1512p video down to 864x480
resolution, giving users the options to adjust the recording quality according to
their storage capabilities.
MIUFLY S2 PRO can also take up to 20 high-resolution snapshots, which,
together with video, can be viewed on backlit, 2 inch LCD color screen. Security
protocols of the device are secure to prevent accidental deletion of evidence
or modification of system settings. Video footage is also digitally watermarked
with the user ID, time and date, ensuring the authenticity of collected video of
the event. The internal GPS receiver provides automatic location tagging of
video- and still-captures, offering irrefutable substantiation of where and when
the audio and video were recorded.
The MIUFLY S2 PRO has voice control function, and users can awaken voice
control through the wake-up word "muifly". They can control video/audio
recording, and photography functions of the law enforcement instrument by
controlling keywords.
Box contents
l MIUFLY Body Camera
l Charging Dock
l USB Cable
l Wall charger
l 360 Degree Rotatable
Clip
l User Manual
l Epaulette Clip
● Crocodile Clip
4
2. Product Diagram
5
6
Item
Description
Camera Lens
High-Definition Camera
Light Sensor
Detect changes in light and auto turn on IR for low-
light recording
Infrared LED
Records clear image in low light situation. Enable
Clear face view with up to 10 meters
Flash Light
Hold Photo button to turn on/off white light
Speaker
Built-in speaker
Up key&
Change
Resolution
a). Press to scroll up in menu mode
b). In play mode, hold to zoom out the playing image
c). In play mode, press to rewind video
d). Hold to change resolution between 1080P and
720P
Confirm Key
a). Press to make a selection in menu mode
b). In play mode, press to pause/resume video or
audio playback.
c). In standby mode, press to review files.
Menu &
Down key
a). Press to enter into menu mode
b). Press to scroll down in menu mode
c). In play mode, hold to zoom in the playing image
d). In play mode, press to fast forward video
FN key
a). Press to tag importance to audio/video file when
camera is on recording
b). Press to switch between video, photo and audio
when playback files
c). Hold to turn IR light on/off;
One Press
Audio
Recording
a). Press to start/stop audio recording
b). Hold to power up camera and start audio
recording immediately when camera is powered off.
c). Hold to turn on/off white flash light
7
One Press
Photo Shot
a). Press to take pictures in standby mode
b). Press to take a single snapshot image while in
video recording
c). Hold to turn on/off white light
One Press
Video
Recording
a). Press to start/stop recording
b). Hold to power up camera and start video
recording immediately when camera is powered off.
USB Port
Connects to USB cable for charging or connection to
PC
PS: optionally connects to external camera
Reset Port
Inside the USB port, press to reset the device
Power
ON/OFF
Button
a). Hold for 3 seconds to turn on/off camera.
b). Press to enter or exit screen saver when camera is
on
Status
Indicator
LED
Green: camera is powered up and in standby mode,
not recording
Flashing Red: camera is recording video
Flashing Yellow: camera is recording audio only
Charging
Indicator
LED
RED: Charging Status
Flat GREEN when device is fully charged
Charging
Base Port
Connect to charging dock to charge the camera
8
LCD Interface:
Recording Indicator
Red blinking record status icon indicates camera is
recording,
Recorded Time
Recorded time of current clip
Battery Level
Current battery charge level
Device and Officer ID
Assigned camera and Officer IDs
Remaining Recording
Time
Estimated recording hours remaining
Available Memory
Internal SD Card capacity: Free space/Total capacity
9
3. Main Menu Optional Detail
To enter the setting menu:
1. Press Menu ( ) button and then enter a password.
2. Enter the password by using the following commands:
l Press Scroll Up ( ) button to change the character to the
previous letter or number.
l Press Menu ( ) button to change the character to the next
letter or number.
l Press OK ( ) button to move to the next character
PS: The default password is 000000.
3. After selecting the last character, press OK ( ) button to enter
the setting menu.
To navigate the settings menu:
Ø Press Menu ( ) button to select next setting or option.
Ø Press Scroll Up ( ) button to select the previous setting or
option.
Ø Press OK ( ) button to move to confirm your selection or enter
the sub-menu.
Ø Press Power ( ) button to save setting and return to the
previous menu.
Following is a list of the available settings and options. The bold items
are the default options.
Table des matières
