Mitutoyo ID-C Manuel utilisateur

No. 99MAH057A1

Date of publication: April 27, 2022

User's Manual

ABSOLUTE Digimatic Indicator

ID-C

ID-C0525NXB

ID-C0525MNXB

ID-C0525ENXB

ID-C1025NXB

ID-C1025MNXB

ID-C1025ENXB

ID-C0550NXB

ID-C0550MNXB

ID-C0550ENXB

ID-C1050NXB

ID-C1050MNXB

ID-C1050ENXB

No. 99MAH057A

■Notice regarding this document

yThe contents of this document are based on information current as of April

2022.

yNo part or whole of this document may be transmitted or reproduced by any

means without prior written permission of Mitutoyo Corporation.

ySomescreendisplaysinthisdocumentmaybehighlighted,simpliedor

partially omitted for convenience of explanation. In addition, some of them

maydi󰀨erfromactualonestotheextentthatnouserwillmisunderstandthe

functions and operations.

yThe corporation, organization and product names that appear in this

document are their trademarks or registered trademarks.

■Product names and model numbers covered in this document

Product name Model number

ABSOLUTE Digimatic Indicator ID-C

ID-C0525NXB

ID-C0525MNXB

ID-C0525ENXB

ID-C1025NXB

ID-C1025MNXB

ID-C1025ENXB

ID-C0550NXB

ID-C0550MNXB

ID-C0550ENXB

ID-C1050NXB

ID-C1050MNXB

ID-C1050ENXB

iNo. 99MAH057A

CONVENTIONS AND WORDING USED IN THIS MANUAL

■Safety reminder conventions and wording warning against potential

hazards

DANGER

Indicates a hazard with a high level of risk which, if not avoided,

will result in death or serious injury.

WARNING

Indicates a hazard with a medium level of risk which, if not

avoided, could result in death or serious injury.

CAUTION

Indicates a hazard with a low level of risk which, if not avoided,

could result in minor or moderate injury.

NOTICE

Indicates a potentially hazardous situation which, if not avoided,

may result in property damage.

Flammable material

Alertstheusertoaspecichazardoussituationthatmeans

"Caution, risk of igniting gas".

■Conventions indicating prohibited and mandatory actions

Indicates concrete information

about prohibited actions.

Indicates concrete information

about mandatory actions.

■Conventions and wording indicating referential information or

reference location

Tips

Indicates further information and details relevant for the operating methods

and procedures that are explained in that section.

Indicates reference location if there is information that should be referred to

in this document or an extraneous User's Manual.

E.g.: For details about XX, see "1.2 Names and Dimensions of

Components" on page 2.

ii No. 99MAH057A

Safety Precautions

Read these "Safety Precautions" thoroughly before operating the product to use

it properly.

These safety precautions include such information as to prevent injury to the

operator and other persons, damage to property and product defects. Be sure to

observe these precautions carefully.

DANGER

Do not use the product in areas where volatile gases may be generated.

There is a risk of igniting the gas.

WARNING

• Theproductisnottoberepairedormodiedbytheusers.

• If the product is dropped or otherwise damaged, turn the power OFF and remove

the battery, and then contact the agent where you purchased the product or a

Mitutoyo sales/service representative.

• Besuretousetheproductspeciedinthisdocumentwhenanoptionalitemis

required.

■Handling batteries

This product uses a lithium metal battery (CR2032). Observe the following

precautions in use.

WARNING

• Always keep batteries out of reach of children. If swallowed, consult a physician

immediately.

• Batteries should never be short-circuited, disassembled, deformed or come in

contactwithextremeheatorames.

• Ifalkalineliquidfromthebatterycomesincontactwiththeeyes,usheyes

immediately with clean water and consult a physician. If alkaline liquid from battery

comesincontactwiththeskin,ushtheexposedareathoroughlywithcleanwater.

CAUTION

Never attempt to charge the primary battery. Never reverse the positive-negative

terminals when mounting. Improper battery handling or mounting may cause

the battery to explode, cause battery leakage and/or serious bodily injury or

malfunctioning.

iii No. 99MAH057A

Precautions for Use

■Product applications and handling

yDo not apply excessive force or subject to sudden impacts such as when

dropped.

yDo not write with an electric pen, etc. This may cause damage.

yDo not operate the keys with a pointed object (such as a screwdriver or

ballpoint pen).

yAvoid loads in the direction perpendicular to the plunger movement or usage

resulting in torsion of the plunger.

■Usage environment

yAvoid using or storing in places directly exposed to sunlight, or extremely hot

or cold places.

yUse or storage in places with low or high atmospheric pressure may cause

material deterioration, etc., leading to failure.

yDo not store the product in a place with high humidity. Also, avoid usage in

places exposed to splashes of water or coolant.

yThe product may malfunction if used in areas with high electrical noise.

ySecurelyxtoanoptionalstandofdialindicator,etc.,anduseinaplace

where there is no vibration.

yErrorswillresultwhenusedinplaceswithsignicanttemperatureuctuation,

duetothethermalexpansionofstructuralcomponentsandxingjigs.Usein

placeswithminimaltemperatureuctuation.Allowtheproducttoadapttothe

ambienttemperaturewhenusinginalocationwithadi󰀨erenttemperature.

■Maintenance

yLightlywipeo󰀨dirtonthisproductwithalint-freesoftcloth.Donotuse

organic solvents such as detergents, thinner or benzine.

yDirt on the plunger may lead to malfunction. Clean with a cloth moistened

with alcohol, etc. before use.

yDo not lubricate the plunger with lubricating oil, etc.

iv No. 99MAH057A

Electromagnetic Compatibility (EMC)

This product complies with the EMC Directive and the UK Electromagnetic

Compatibility Regulations; however, if this receives electromagnetic interference

that exceeds these requirements, it will be out of warranty and require appropriate

measures.

Warranty

This product has been manufactured under strict quality management, but

should it develop problems within one year of the date of purchase in normal

use, repair shall be performed free of charge. Please contact the agent where

you purchased the product or a Mitutoyo sales/service representative

("SERVICE NETWORK" on page App-1). This warranty, however, shall not

a󰀨ectanyprovisionsoftheMitutoyoSoftwareEndUserLicenseAgreement.

If this product fails or is damaged for any of the following reasons, it will be

subject to a repair charge, even if it is still under warranty.

yFailure or damage owing to fair wear and tear

yFailure or damage owing to inappropriate handling, maintenance or repair, or

tounauthorizedmodication

yFailure or damage owing to transport, dropping, or relocation of the product

after purchase

yFailureordamageowingtore,salt,gas,abnormalvoltage,lightningsurge,

or natural disaster

yFailure or damage owing to use in combination with hardware or software

other than those designated or permitted by Mitutoyo

yFailure or damage owing to use in ultra-hazardous activities

Thiswarrantyise󰀨ectiveonlywheretheproductisproperlyinstalledand

operated in conformance with the instructions in this document within the

original country of the installation.

EXCEPT AS SPECIFIED IN THIS WARRANTY, ALL EXPRESS OR IMPLIED

CONDITIONS, REPRESENTATIONS, AND WARRANTIES OF ANY NATURE

WHATSOEVER INCLUDING, WITHOUT LIMITATION, ANY IMPLIED

WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR

PURPOSE, NONINFRINGEMENT OR WARRANTY ARISING FROM A

COURSE OF DEALING, USAGE, OR TRADE PRACTICE, ARE HEREBY

EXCLUDED TO THE MAXIMUM EXTENT ALLOWED BY APPLICABLE LAW.

You assume responsibility for all results due to the selection of this product to

achieve your intended results.

vNo. 99MAH057A

Disclaimer

IN NO EVENT WILL MITUTOYO, ITS AFFILIATED AND RELATED

COMPANIES AND SUPPLIERS BE LIABLE FOR ANY LOST

REVENUE, PROFIT, OR DATA, OR FOR SPECIAL, DIRECT, INDIRECT,

CONSEQUENTIAL, INCIDENTAL, OR PUNITIVE DAMAGES HOWEVER

CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY ARISING

OUT OF THE USE OF OR INABILITY TO USE THIS PRODUCT EVEN

IF MITUTOYO OR ITS AFFILIATED AND RELATED COMPANIES AND/

OR SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES.

If, notwithstanding the foregoing, Mitutoyo is found to be liable to you for any

damage or loss which arises out of or is in any way connected with use of this

productbyyou,innoeventshallMitutoyo'sand/oritsa󰀩liatedandrelated

companies' and suppliers' liability to you, whether in contract, tort (including

negligence), or otherwise, exceed the price paid by you for the product only.

The foregoing limitations shall apply even if the above-stated warranty fails of its

essential purpose.

BECAUSE SOME COUNTRIES, STATES OR JURISDICTIONS DO NOT

ALLOW THE EXCLUSION OR THE LIMITATION OF LIABILITY FOR

CONSEQUENTIAL OR INCIDENTAL DAMAGES, IN SUCH COUNTRIES,

STATES OR JURISDICTIONS, MITUTOYO'S LIABILITY SHALL BE LIMITED

TO THE EXTENT PERMITTED BY LAW.

vi No. 99MAH057A

About This Document

This document is intended to provide an overview of the product, the functions

of each component, setup, usage and maintenance details.

■How to read this document

Indicates an operating

procedure to be performed or

its outline.

Indicates supplementary

information.

Indicates the reference

location.

Indicatesspecicwork

procedures.

vii No. 99MAH057A

■Brackets, quotation marks and numbers (

, 1)

The meanings of brackets, quotation marks and numbers to be used in this

document are as follows.

( ): Round brackets Represent a paraphrase of an immediately preceding

phrase or a supplementary explanation.

" ": Double quotation

marks

Represent a highlighted phrase. They also indicate

an index where information to be referenced is

described.

[ ]: Square brackets Represent an item (menu, dialog, button, tab, etc.)

that appears on the screen, or key on the controller or

keyboard. They also indicate an item to be purposely

entered or selected by the customer.

...

1,2,3...

Indicates the order and the contents of tasks.

(

: indicates main tasks, 1: indicates detailed tasks)

■Key notations

In this manual, the names of the keys to be pressed, their operations (length and

number of times the key is pressed), and the progress directions of procedures

are indicated by arrows.

E.g.: [F2] key

Press the [F2] key and release it immediately (short press).

Press the [F2] key and release it after 2 seconds or longer (long

press).

[F1] key

[F2] key

[F3] key

viii No. 99MAH057A

CONVENTIONS AND WORDING USED IN THIS MANUAL ………………………… i

Safety Precautions ……………………………………………………………………… ii

Precautions for Use …………………………………………………………………… iii

Electromagnetic Compatibility (EMC) ……………………………………………… iv

Warranty ………………………………………………………………………………… iv

Disclaimer ………………………………………………………………………………… v

About This Document ………………………………………………………………… vi

Contents …………………………………………………………………………………viii

1 Overview …………………………………………………………………………… 1

1.1 Overview of This Product………………………………………………… 1

1.2 Names and Dimensions of Components ……………………………… 2

1.2.1 Main Unit ………………………………………………………………… 2

1.2.2 Display (LCD) …………………………………………………………… 4

1.2.3 Standard Accessories ………………………………………………… 6

2 Preparations before Use………………………………………………………… 7

2.1 When Used Facing Up …………………………………………………… 7

2.2 Mounting to a Stand/Jig ………………………………………………… 8

2.2.1 Mounting by Stem ……………………………………………………… 8

2.2.2 Installing with Various Backs ………………………………………… 9

2.3 Mounting the Lifting Lever and Lifting Knob …………………………… 10

2.3.1 Lifting Lever ……………………………………………………………… 10

2.3.2 Lifting Knob (Optional) ………………………………………………… 11

2.4 Contact Point Replacement……………………………………………… 12

2.5 Display Angle Adjustment ……………………………………………… 13

3 Basic Usage ……………………………………………………………………… 15

3.1 Precautions before Use ………………………………………………… 15

Contents

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Mitutoyo Instrument de mesure

Mitutoyo

Mitutoyo 500-150-30 Manuel utilisateur

Mitutoyo

Mitutoyo ID-CNX Series Manuel utilisateur

Mitutoyo

Mitutoyo CLM-DKX Manuel utilisateur

Mitutoyo

Mitutoyo 99MAG014M Manuel utilisateur

Mitutoyo

Mitutoyo CG-S10A Manuel utilisateur

Mitutoyo

Mitutoyo ID-C112GXB Manuel utilisateur

Mitutoyo

Mitutoyo 129 Series Manuel utilisateur

Mitutoyo

Mitutoyo QM-Height QMH-350AX Manuel utilisateur

Mitutoyo

Mitutoyo BA9700 Manuel utilisateur

Mitutoyo

Mitutoyo HDM-30AX Manuel utilisateur

Mitutoyo

Mitutoyo SURFTEST SV-3100 Manuel utilisateur

Mitutoyo

Mitutoyo ID-SX2 Manuel utilisateur

Mitutoyo

Mitutoyo ID-U Manuel utilisateur

Mitutoyo

Mitutoyo QM-Height Series Manuel utilisateur

Mitutoyo

Mitutoyo LGH Series Manuel utilisateur

Mitutoyo

Mitutoyo Digimatic MDC-S Manuel utilisateur

Mitutoyo

Mitutoyo LSM-9506 Manuel utilisateur

Mitutoyo

Mitutoyo BOREMATIC Manuel utilisateur

Mitutoyo

Mitutoyo HDM 192 Series Manuel utilisateur

Mitutoyo

Mitutoyo BMB-K Manuel utilisateur

Mitutoyo

Mitutoyo D/E Manuel utilisateur

Mitutoyo

Mitutoyo ID-F125 Manuel utilisateur

Mitutoyo

Mitutoyo LGB2 Manuel utilisateur

Mitutoyo

Mitutoyo ID-C125XB Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur