Minolta FP-1 Manuel utilisateur

4460-7705-01

FP-1 FILM PROJECTOR

*Please use this manual when the Film Projector is installed in CF910 Color Copier.

Thank you for choosing Minolta.

This operator’s manual explains how to operate the Film Projector. It also gives some troubleshooting tips

as well as general precautions to be observed when operating the Film Projector.

To ensure the best performance and effective use of your Film Projector, read this manual carefully until

you familiarize yourself thoroughly with its operation and features. After you have read through the

manual, keep it for ready reference.

Please use this manual as a quick and handy reference tool for immediately clarifying any questions

which may arise.

FOR USA/CANADA

WARNING

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated

in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and if not installed and

used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the

interference at his own expense.

The design and production of this unit conforms to FCC Regulations, and any changes or modifications must be registered with

the FCC and are subject to FCC control. Any changes made by the purchaser or user without first contacting the manufacturer

will be subject to penalty under FCC regulations.

FCC-F01

IC-04

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.

Legal Restrictions on Copying

Certain types of documents must never be copied by the copier for the purpose or with the intent to pass

copies of such documents off as the original. The following is not a complete list but is meant to be used

as a guide to responsible copying.

Financial Instruments

•Personal Checks

•Travelers Checks

•Money Orders

•Certificates of Deposit

•Bonds or other Certificates of Indebtedness

•Stock Certificates

Legal Documents

•Food Stamps

•Postage Stamps (canceled or uncanceled)

•Checks or Drafts drawn by Government Agencies

•Internal Revenue Stamps (canceled or uncanceled)

•Passports

•Immigration Papers

•Motor Vehicle Licenses and Titles

•House and Property Titles and Deeds

General

•Identification Cards, Badges, or Insignias

•Copyrighted Works without permission of the copyright owner

In addition, it is prohibited under any circumstances to copy domestic or foreign currencies or Works of

Art without permission of the copyright owner.

When in doubt about the nature of a document, consult with legal counsel.

iii

Contents

1. Parts Identification

Parts Identification ..................................................................................................................... 1

2. Accessory Identification

Accessory Identification............................................................................................................. 2

3.GettingtoKnowtheBasics

Types of Film and Correct Holders for Placement .................................................................... 3

When Making Copies................................................................................................................. 3

Operating Precautions................................................................................................................ 4

4. Operation Flow

Operation Flow........................................................................................................................... 5

5. Setting up the Projector

Setting up the Projector.............................................................................................................. 6

6. Making Copies From Film

Making Copies From Film......................................................................................................... 7

Setting the Projector Adjustment ............................................................................................. 10

Using a Different Type of Film / Performing Shading Again.................................................. 11

Shutting Down the Projector.................................................................................................... 11

7. Troubleshooting Tips

Copy Image Problems.............................................................................................................. 12

Faulty Shading.......................................................................................................................... 12

Faulty Symptoms...................................................................................................................... 13

Making the Film Standard........................................................................................................ 13

Adjusting Focus........................................................................................................................ 14

Cleaning ................................................................................................................................... 15

8. Specifications

Specifications........................................................................................................................... 16

9. Function Combination Matrix

Function Combination Matrix.................................................................................................. 17

10. Description of Paper Size and Zoom Ratio Table

Description of Paper Size and Zoom Ratio Table.................................................................... 19

1. Parts Identification

Parts Identification Power Cord

Plug the Power Cord into a power outlet

when you use the Film Projector. Ground

Film Holder Slot

Place the Holder in this

slot.

Filter Slot

Place the Filter

(Posi/Nega) in this slot.

Film Loading Cover

Open when placing the Film

Holder and Filter in position.

(Keep this cover closed when

the Film Projector is not in

use to prevent entry of dust

and dirt.)

Lens Cover

Open when installing the

Mirror Unit. (Keep this

cover closed when the Film

Projector is not in use to

prevent entry of dust and

dirt.)

Mirror Unit

Refracts light from the

Film Projector to project

the image onto the copier

glass.

Fresnel Lens

Raise when loading

medium or large

format film.

Accessories Storage Area

Keep accessories stored in

this area. (Do not store any

other items other than the

accessories.)

Film Holder Loading Lever

Push this lever to the left

while loading the Film

Holder.

Focus Adjustment Lever

Use when adjusting focus

manually.

Power Switch

Use to turn the Projector

ON or OFF.

1144O205AA

2. Accessory Identification

Accessory Identification Lock Lever

This lever is used to secure the film

placed in the Film Holder.

Film Holder

Place the film in this holder,

which comes in three

versions:

•Strip Film Holder

Accommodates up to six

sheets of strip film.

•Mount Film Holder

Accommodates up to five

sheets of positive mount

film.

•Glass Mount Film Holder

Accommodates up to five

sheets of positive glass

mount film.

Spare Mount

Usewhenmakingyour

own film standard.

Film Standard

Use when shading negative film.

ISO-100 film from the following three manufacturers is

available:

• Fuji Photo Film Co., Ltd.

• Agfa-Gevaert N. V.

• Eastman Kodak Co.

Load the Film Standard in the Strip Film Holder.

Filter (Posi = positive;

Nega = negative)

Use the appropriate filter

suited to the film being used

(positive/negative).

Blower Brush

Blows dust and dirt off the

lens and glass surface.

Positioning Sheet

Place this sheet on the Original Glass of the copier when

loading medium or large format film. Cut the sheet to the

correct size of the film.

• If two or more Positioning Sheets are necessary, make

copies of the sheet on 11” ×14” or 11” ×17” paper.

Copying on thick paper makes the job easier.

1144O206AA

1144O224AA

3.GettingtoKnowtheBasics

The following pages explain basic information about using the Film Projector.

Types of Film and Correct Holders for Placement

NOTES

Observe the following precautions to protect the film.

• Do not use the same film for more than 30 min.

• Avoid using or storing film at a site with a temperature exceeding 30°C.

• If the film is precious, duplicate it before use.

• Remove the film from its protective bag before use.

Useful Tips

- Types of Film -

• Positive film: When viewed with back light, the light and dark areas of Positive film appear

just as they look on the print.

• Negative film: When viewed with back light, the light areas appear dark and the dark areas

appear light (the opposite of Positive film).

• Slide positive film: 35 mm positive film placed in a slide mount.

• Glass mount film: It has the same configuration as the slide film except that the film is covered with

glass.

When Making Copies

<35 mm film>

Mount film (using the Mount Film Holder) Strip film (using the Strip Film Holder)

Film image size

to be copied

Copy size

(in full size mode):

Equivalent to

Invoice size

Holder Mount Film

Holder Strip Film

Holder Glass Mount

Film Holder Original Glass

Film Type/Size

35 mm mount film ×××

35 mm glass mount film ×× ×

35 mm strip film ××

Brownie ×××

6×6-cm ×××

4×5” ×××

Max. size (approx. 5-3/4”×8-1/2”) ×××

: This film can be used for this Holder.

× : This film cannot be used for this Holder.

Approx. 33 mm

Approx.

21.5 mm

1144O637CA Approx. 34 mm

Approx. 23 mm

1144O638CA

Approx. 185 mm

Approx.

121 mm

1144O639CA Approx. 191 mm

Approx.

129 mm

1144O640CA

3. Getting to Know the Basics

Useful Tips

• To enlarge the film image area being copied, use the Glass Mount Film Holder and adjust the focus

using the Focus Adjusting Lever. Adjusting Focus ☞p. 14

• 35 mm strip film can also be copied from the Original Glass, without using the Mount Holder. In this

case if the max. size is used, up to approx. 20 frames can be copied in a single copy run.

The image of the film that can be copied is approx. 1 mm inside the frame on the Positioning Sheet as

shown below.

Operating Precautions

• Do not shut off the Projector light.

If an object is placed between the Projector and Mirror Unit, the Projector is unable to project the

correct image.

• Do not jolt the Projector during operation.

If the Projector is jolted (opening and closing a door or cover will produce a shock), especially after

shading, the Projector is unable to project the correct image. If jolted, perform shading once again.

• If the Panel Reset key is pressed while you are using the Projector, it cancels all functions set for the

Projector.

• Keep the Film Standards, Filter, Lens, Holders, Mirror Unit, and Original Glass away from dust and

dirt.

Dust and dirt on any of these parts can make the copy look dirty. Cleaning ☞p. 15

Film Size

60 ×45 mm

60 ×60 mm

60 ×70 mm

60 ×80 mm

60 ×90 mm

4” ×5”

Positioning

Sheet

Frame

Approx.

1mm 1154O017AA

Approx.

1mm

Approx.

1mm

4. Operation Flow

Operation Flow

Setting up the Projector. ☞p. 6

Select Projector mode.

On the Basic screen, touch the key.Projector

Select the type and size of film.

35 mm Film

Select the type of Holder. Other Sizes

Select the size of the film.

Positive film

Place the Filter (Posi) in position. Negative film

Place the Filter (Nega) in position.

Place the Film Standard appropriate

for the film type.

Touch .Shading

Load the film.

35 mm Film

Load the film in the correct Film

Holder.

Other Sizes

Cut out an opening of the size of the film

in the Positioning Sheet and place it on

the copier’s Original Glass.

Place the film in the opening in the

Positioning Sheet.

Select the paper size.

Select the zoom ratio.

Press the Start key to start the

copy cycle.

Select the next operation.

Touch .

Toselectanewfilmtype .........................Touch .

Toperformshadingagain.........................Touch .

Tomakeacopyfromthesamefilmtype.............Touch .

ToshutdowntheProjector........................Touch .

Projector Change Settings

Change Settings

End

NOTE

When placing negative film,

remove the Holder in which the

Film Standard has been placed.

5. Setting up the Projector

Setting up the Projector

Plug the Power Cord of the Projector into the

power outlet and turn ON the Power Switch.

NOTES

• Use a power outlet with a capacity of AC 115V

and 5A or more. If using the same power outlet

which the copier uses, it should have a

capacity of AC 115V and 20A or more.

• Be sure to make ground connection.

Gently swing down the Lens Cover.

Mount the Mirror Unit to the Projector,

aligning the holes in the bottom of the

Mirror Unit with the positioning pins

provided inside the Lens Cover.

Slide the tab on the Mirror Unit in the

direction of the arrow and open the Mirror

Unit.

NOTE

DO NOT touch the Fresnel Lens and glass

surfaces of the Mirror Unit. A dirty copy will

result if they are stained with fingerprints, dust

and dirt.

Cleaning ☞p. 15

Lens Cover

1144O207AA

Mirror Unit 1144O208AA

1144O209AA

Table des matières

Autres manuels Minolta Projecteur

Minolta

Minolta Riva Zoom 105i Manuel utilisateur

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Epson

Epson VS400 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 705HD Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur