Minolta FREEDOM ZOOM 130 Manuel utilisateur
EINSTRUCTION MANUAL
32
ADVANCED OPERATION
Selecting Functions in the Flash Mode 36
Flash Range.................................. 38
Autoflash ...................................... 39
Autoflash with Red-eye Reduction 40
Fill flash ........................................ 42
Flash cancel.................................. 43
Night Portrait ................................ 44
Landscape/Night View .................. 45
Exposure Compensation .............. 46
Self-timer.............................................. 47
For Owners of the Quartz-date Model.. 49
Attaching the Camera Strap ................ 56
APPENDIX
Care and Storage ................................ 58
Technical Specifications ...................... 62
Contents.................................... 2
For Proper and Safe Use.......... 3
GETTING STARTED
Name of Parts ........................ 10
Inserting the Battery................ 14
Battery Condition Indicator...... 16
Loading the Film...................... 17
Rewinding the Film.................. 20
BASIC OPERATION
Full-auto Operation.................. 25
Focus Lock.............................. 29
For Close Subjects.................. 31
Special Focusing Situations.... 34
CONTENTS FOR PROPER AND SAFE USE
Read and understand all warnings and cautions before using this product.
Using batteries improperly can cause them to leak harmful solutions, overheat,
or explode which may damage property or cause personal injury. Do not ignore
the following warnings.
• Only use the batteries specified in this instruction manual.
• Do not install the batteries with the polarity (+/–) reversed.
• Do not use batteries which show wear or damage.
• Do not expose batteries to fire, high temperatures, water, or moisture.
• Do not attempt to recharge, short, or disassemble batteries.
• Do not store batteries near or in metallic products.
• Do not use leaking batteries. If fluid from the batteries enters your eye,
immediately rinse the eye with plenty of fresh water and contact a doctor. If
fluid from the batteries makes contact with your skin or clothing, wash the area
thoroughly with water.
WARNING
54
FOR PROPER AND SAFE USE
• Tape over lithium battery contacts to avoid short-circuiting during disposal;
always follow local regulations for battery disposal.
• Do not disassemble this product. Electric shock may cause injury if a high
voltage circuit inside the product is touched. Take the product to a Minolta
Service Facility when repairs are required.
• Immediately remove the batteries and discontinue use if the camera is
dropped or subjected to an impact in which the interior, especially the flash
unit, is exposed. The flash has a high voltage circuit which may cause an
electric shock resulting in injury. The continued use of a damaged product or
part may cause injuries.
• Keep batteries or small parts that could be swallowed away from infants.
Contact a doctor immediately if an object is swallowed.
• Store this product out of reach of children. Be careful when around children,
not to harm them with the product or parts.
• Do not fire the flash directly into the eyes. It may damage eyesight.
• Do not fire the flash at vehicle operators. It may cause a distraction or
temporary blindness which may lead to an accident.
• Do not look directly at the sun or strong light sources through the viewfinder. It
may damage your eyesight or cause blindness.
• Do not expose this product to liquids or operate this product with wet hands. If
liquid enters the product, immediately remove the batteries and discontinue
use. The continued use of a product exposed to liquids may cause damage or
injury through fire or electric shock.
• Do not use the product near inflammable gases or liquids such as gasoline,
benzine, or paint thinner. Do not use inflammable products such as alcohol,
benzine, or paint thinner to clean the product. The use of inflammable cleaners
and solvents may cause an explosion or fire.
• If the product emits a strange odor, heat, or smoke, discontinue use.
Immediately remove the batteries taking care not to burn yourself. The
continued use of a damaged product or part may cause injuries.
• Take the product to a Minolta Service Facility when repairs are required.
7
FOR PROPER AND SAFE USE
6
CAUTION
• Do not use or store the product in a hot or humid environment such as the
glove compartment or trunk of a car. It may damage the product and batteries
which may result in burns or injuries caused by heat, fire, explosion, or leaking
battery fluid.
• If batteries are leaking, discontinue use of the product.
• The lens retracts when the camera is turned off or the auto-power-off function
is activated. Touching the lens barrel while it is retracting may cause injury.
• Do not fire the flash while it is in contact with people or objects. The flash unit
discharges a large amount of energy which may cause burns.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation. Changes or modifications not approved by
the party responsible for compliance could void the user's authority to operate
the equipment. This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
Continued on next page.
Thank you for purchasing this Minolta camera. Your new camera is with functions
which will suit your every photographic need. Before using your new camera,
please take the time to read through this instruction manual for important
information on the use and care of your camera.
ICONS USED IN THIS MANUAL
GETTING STARTED
important user notices
supplimentary user information
FOR PROPER AND SAFE USE
8
This mark on your camera certifies that this camera meets the
requirements of the EU (European Union) concerning interference causing
equipment regulations. CE stands for Conformité Européenne (European
Conformity).
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
1110 Continued on next page.
Shutter-release button (27)
Data panel (12)
Viewfinder* (13)
Date button (49)
(Quartz-date model only)
Flash-mode/
Select button
(36/49)
Main switch (25)
Film window
Strap eyelet (56)
Zoom lever (26)
Back cover (17)
Drive-mode/
Adjust button
(47/49)
Back-cover release (17)
Battery-chamber (14)
For information on specific parts, refer to the page numbers shown in parenthesis.
AF windows*
Meter window*
Flash* (36)
Self-timer/
Red-eye reduction
lamp* (47/40) Lens*
(Lens barreal)
Manual-rewind
button (22)
* Do not touch
Viewfinder window*
Tripod socket
NAME OF PARTS
BODY
Battery-chamber
release (14)Ready lamp (27)
1312
Focus frame (27)
Ready lamp (green) (27)
With the shutter-release button pressed partway down -
On: Focus locked
Off: Flash charging
Blinks quickly: Subject is too close
Blinks slowly: Camera shake warning
Close-framing guide (33)
VIEWFINDER
Battery-condition indicator (16)
Frame counter (19)
Film-transport signals (19)
Cartridge mark (20)
Self-timer indicator (47)
Date/Time display
(Quartz-date model only) (49)
NAME OF PARTS
DATA PANEL Only the necessary indicators will appear on the data panel.
Flash mode indicators (36)
Autoflash
Autoflash with red-eye reduction
Fill flash
Flash cancel
Night Portrait (with red-eye reduction)
Landscape/Night view
Exposure Compensation
15
2.Insert the battery matching the positive
terminal mark inside the battery chamber-
door, then click the door closed.
• Quartz-date model: The date and time must be reset (p.50).
• When changing batteries, make sure the main switch is off.
14
INSERTING THE BATTERY
Your camera uses one 3-volt CR123A or DL123A lithium battery.
1.Open the battery-chamber door
by sliding the battery-chamber
release in the direction
indicated.
1716
1.Slide the back-cover release
down to open the back cover.
LOADING THE FILM
• This camera has a safety-lock feature that prevents the camera from
being opened accidentally when film is loaded. The film-chamber lock
should automatically release when the film is rewound.
• Use only 35mm, DX-coded film rated between ISO 25 and 3200.
• Do not use Polaroid instant 35mm film. Winding problems may occur.
• ISO 400 film is recommended for best results.
• Always load and unload film in subdued light.
Briefly appears. Power is sufficient for
all camera operations.
Replace the battery. The shutter will
lock until the battery is replaced.
Each time the camera is turned on, a symbol will appear on the data panel to
indicate the power status of the battery.
Power is sufficient, but the battery must
be replaced soon.
BATTERY CONDITION INDICATOR
Continued on next page.
If the back cover does not open when the
film is not loaded, turn the main switch off
and on to release the film chamber lock.
1918
2.Place the film cartridge into the
film chamber. Extend the film
leader to the "FILM TIP" mark,
making sure it lays flat.
• If the film tip extends beyond the index mark, push the excess film back
into the cartridge.
LOADING THE FILM 3.Close the back cover.
• The film automatically advances to the first frame
and appears on the data panel.
• If the film has been loaded improperly, will
blink on the data panel and the shutter will
remain locked. Open the back cover and repeat
the loading procedure.
• Once the film is loaded, the back cover will lock preventing accidental
opening until the film is rewound (film chamber lock).
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Minolta Appareil photo numérique
Minolta
Minolta Maxxum Dynax 3xi Manuel utilisateur
Minolta
Minolta DiMAGE F300 Manuel utilisateur
Minolta
Minolta DIMAGE V - MAC Manuel utilisateur
Minolta
Minolta MN40WD Manuel utilisateur
Minolta
Minolta XG-7 Manuel utilisateur
Minolta
Minolta F35 Manuel utilisateur
Minolta
Minolta MAXXUM 300SI - PART 1 Manuel utilisateur
Minolta
Minolta DYNAX 3L Manuel utilisateur
Minolta
Minolta Dimage X20 Manuel utilisateur
Minolta
Minolta Dimage V Manuel utilisateur
Minolta
Minolta Dimage RD 3000 Manuel utilisateur
Minolta
Minolta MAXXUM 500SI - PROGRAM SELECTION Manuel utilisateur
Minolta
Minolta DYNAX 500si Manuel utilisateur
Minolta
Minolta Dimage G500 Manuel utilisateur
Minolta
Minolta SR-T 303 Manuel utilisateur
Minolta
Minolta AF-Tele Manuel utilisateur
Minolta
Minolta DIMAGE 7HI - SOFTWARE Manuel utilisateur
Minolta
Minolta SR-T 200 Manuel utilisateur
Minolta
Minolta TC-1 Manuel utilisateur
Minolta
Minolta DIMAGE XT ME-0308 Manuel utilisateur
