MINN KOTA RIPTIDE INSTINCT QUEST Manuel utilisateur

RIPTIDE INSTINCTTM QUESTTM

BOW-MOUNT TROLLING MOTOR

Installation Instructions

INTRODUCTION

EXAMPLE

THANK YOU

Thank you for choosing Minn Kota. We believe that you should spend more time ﬁshing and less time positioning your boat. That’s why

we build the smartest, toughest, most intuitive trolling motors on the water. Every aspect of a Minn Kota trolling motor is thought out and

rethought until it’s good enough to bear our name. Countless hours of research and testing provide you the Minn Kota advantage that can

truly take you “Anywhere. Anytime.” We don’t believe in shortcuts. We are Minn Kota. And we are never done helping you catch more ﬁsh.

REGISTRATION

Remember to keep your receipt and immediately register your trolling

motor on our website at minnkota.johnsonoutdoors.com/us/register.

SERIAL NUMBER

Your Minn Kota 11-character serial number is very important. It helps

to determine the speciﬁc model and year of manufacture. When

contacting Consumer Service or registering your product, you will

need to know your product's serial number. A duplicate copy of your

serial number label has been included, which can also be entered in

the One-Boat Network App for future reference.

MOTOR INFORMATION (For Consumer Reference Only)

Made for

Android

™

Use of the Made for Apple badge means that an accessory has been designed to connect speciﬁcally to the Apple product(s) identiﬁed in

the badge, and has been certiﬁed by the developer to meet Apple performance standards. Apple is not responsible for the operation of this

device or its compliance with safety and regulatory standards. iPhone is a trademark of Apple Inc., registered in the U.S. and other countries.

The trademark “iPhone” is used in Japan with a license from Aiphone K.K.

AndroidTM is a trademark of Google LLC. The Android robot is reproduced or modiﬁed from work created and shared by Google and used

according to terms described in the Creative Commons 3.0 Attribution License.

Made for iPhone® 11 and iPhone X

For updated iOS, Humminbird® and Minn Kota® compatibility, visit minnkota.johnsonoutdoors.com

Model: ____________________________________________________________________________________________________

Serial Number: ______________________________________________________________________________________________

Purchase Date: ______________________________________________________________________________________________

Store Where Purchased: _______________________________________________________________________________________

NOTICE: The serial number for the Riptide Instinct QUEST is

located on the inside of the Mount, behind the left Motor Ramp.

NOTICE: Do not return your Minn Kota motor to your retailer. Your retailer is not authorized to repair or replace this unit. You may

obtain service by: calling Minn Kota at (800) 227-6433; returning your motor to the Minn Kota Factory Service Center; sending

or taking your motor to any Minn Kota authorized service center. A list of authorized service centers is available on our website

at minnkota.johnsonoutdoors.com. Please include proof of purchase, serial number and purchase date for warranty service with

any of the above options.

SAFETY CONSIDERATIONS

Please thoroughly read the user manual. Follow all instructions and heed all safety and cautionary notices. Use of this motor is only

permitted for persons that have read and understood these user instructions. Minors may use this motor only under adult supervision.

WARNING

You are responsible for the safe and prudent operation of your vessel. We have designed your Minn Kota product to be an accurate

and reliable tool that will enhance boat operation and improve your ability to catch ﬁsh. This product does not relieve you from the

responsibility for safe operation of your boat. You must avoid hazards to navigation and always maintain a permanent watch so you can

respond to situations as they develop. You must always be prepared to regain manual control of your boat. Learn to operate your Minn

Kota product in an area free from hazards and obstacles.

WARNING

Never run the motor out of the water, as this may result in injuries from the rotating propeller. The motor should be disconnected from

the power source when it is not in use or is o the water. When connecting the power-supply cables of the motor to the battery, ensure

that they are not kinked or subject to chafe and route them in such a way that persons cannot trip over them. Before using the motor

make sure that the insulation of the power cables is not damaged. Disregarding these safety precautions may result in electric shorts

of battery(s) and/or motor. Always disconnect motor from battery(s) before cleaning or checking the propeller. Avoid submerging the

complete motor as water may enter the lower unit through control head and shaft. If the motor is used while water is present in the lower

unit considerable damage to the motor can occur. This damage will not be covered by warranty.

WARNING

Take care that neither you nor other persons approach the turning propeller too closely, neither with body parts nor with objects. The

motor is powerful and may endanger or injure you or others. While the motor is running watch out for persons swimming and for ﬂoating

objects. Persons whose ability to run the motor or whose reactions are impaired by alcohol, drugs, medication, or other substances

are not permitted to use this motor. This motor is not suitable for use in strong currents. The constant noise pressure level of the motor

during use is less than 70dB(A). The overall vibration level does not exceed 2,5 m/sec2.

WARNING

It is recommended to only use Johnson Outdoors approved accessories with your Minn Kota motor. Using non-approved accessories

including to mount or control your motor may cause damage, unexpected motor operation and injury. Be sure to use the product and

approved accessories, including remotes, safely and in the manner directed to avoid accidental or unexpected motor operation. Keep all

factory installed parts in place including motor and accessory covers, enclosures and guards.

WARNING

When stowing or deploying the motor, keep ﬁngers clear of all hinge and pivot points and all moving parts. In the event of unexpected

operation, remove power leads from the battery.

KNOW YOUR BOAT

KeelKeel

BowBow

HullHull

BowBow

SternStern

PortPort

PortPort StarboardStarboard

StarboardStarboard

GunwaleGunwale

InboardInboard

OutboardOutboard

TransomTransom

INSTALLATION

INSTALLING THE RIPTIDE INSTINCT QUEST

Your new Riptide Instinct QUEST comes with everything you’ll need to install it directly to the boat. The motor can be mounted directly

to the bow or coupled with a Minn Kota quick release bracket for ease of mounting and removal. For compatible quick release brackets

and to locate your nearest dealer, visit minnkota.johnsonoutdoors.com. To install the motor directly to the boat, follow the instructions

provided in this manual. Please review the parts list, mounting considerations and tools needed for installation prior to getting started.

For additional product support, visit minnkota.johnsonoutdoors.com.

INSTALLATION PARTS LIST

Item /

Assembly Part # Description Qty.

(Includes 1-5) 2994948 BAG ASM, INSTINCT, T3 BL HDW 1

1 2323440 SCREW-3/8-16 X 2 1/2 HHCS SS 6

2 2383122 NUT 3/8-16 NYLON INST LOCKNUT 6

3 2321710 WASHER, RUBBER MOUNT 6

4 2371796 BACKUP BAR 3/16 X 1 X 2 6

5 2378608 ANTI SEIZE TUBE, 4CC, TALON 1

6✖MOTOR ASSEMBLY 1

7 2390802 LANYARD w/CARARBINER IP RMT U2 1

B 411690-1 TROLLING MOTOR REMOTE 1

C 2992371 STABILIZER, BWMT ES TM ASM

*72"* *87”* *100”* 1

(Includes 8) 2994955 BAG ASM, MKA-60 STABILIZER

*72”* *87”* *100”* 1

8 2383475 SCREW-#8-18x1½L SELF DRILL SS

*72”* *87”* *100”* 4

9 2321170 PROP, POWER REAMED 1

(Includes 10-12) 2992604 BAG ASSM, PROP HARDWARE 1

10 2091701 WASHER-PROP (LARGE) MAX101 1

11 2093101 NUT-PROP,NYLOC,LG,MX101 3/8 SS 1

12 2262659 PIN-DRIVE 1" X 3/16 SS 17-4 1

13 490637-4 CABLE, ETH, M12-M12, BRAID,30' 1

14 490380-1 CABLE, ETHERNET PIGTAIL-700 HD 1

15 2206301 TIE WRAP, LOW PROFILE 8" 1

p2207127 MANUAL, INSTINCT 1

p2207128 MANUAL, INSTL GD, INSTINCT 1

p2207126 QK REF GUIDE,ULT Q/INST Q 1

p2397110 MANUAL, WIRELESS REMOTE 1

p2397115 GUIDE-QCK REFERENCE iP 4.0 1

p2294950 INSTRUCTIONS,OBN & REMOTE PAIR 1

p2207130 BRUSHLESS QS SETUP GUIDE 1

p2297165 MANUAL-DISCLAIMER,DWNLOAD INFO 1

p2377179 INSTR.SHEET, MKA-60 STBLZR

*72”* *87”* *100”* 1

pNot shown on Parts Diagram.

✖This part is included in an assembly and cannot be ordered individually. 44

AA1212

1010

1414

1313

1515

1111

MOUNTING CONSIDERATIONS

All six mounting holes must be used when securing the Riptide Instinct QUEST to the boat deck. If the desired mounting location does not

allow for all six mounting holes and mounting bolts, a Boat Deck Reinforcement Kit (1854058) should be used or a new mounting location

selected. Consider a quick release bracket with the installation of your motor.

Mounting options for the Riptide Instinct QUEST include:

1. Installing the motor directly to the boat deck

2. Mounting the motor with an MKA-58 Boat Deck Reinforcement Kit (1854058)

3. Mounting the motor with an MKA-56/RTA-55 composite quick release bracket (1854056 - black/1854055 - white) or an MKA-57

sliding quick release bracket (1854057)

4. Combining an MKA-58 Boat Deck Reinforcement Kit and an MKA-56/RTA-55 Quick Release Bracket with the Riptide Instinct QUEST

When mounting the Riptide Instinct QUEST directly to the boat, follow the installation instructions outlined in this manual. If an

accessory bracket will be used to mount the Riptide Instinct QUEST, follow the installation instructions provided with the mounting

accessory. To view a list of compatible accessories, visit minnkota.johnsonoutdoors.com.

It is recommended that the motor be mounted as close to the centerline or keel of the boat

as possible. Make sure the area under the mounting location is clear to drill holes and install

hardware. The mounting surface for the Riptide Instinct QUEST must be ﬂat. Rubber washers

can be used to shim the base extrusion ﬂat before hardware is tightened.

The motor must not encounter any obstructions as it is lowered into the water or raised into the

boat when stowed and deployed. When stowed, ensure that there is enough room for the Shaft

and Control Head and that they do not extend off the side of the boat.

MOUNTING CONSIDERATIONS

View accessories

available for your

trolling motor

at minnkota.

johnsonoutdoors.com.

1 2 3 4

• #3 Phillips Screwdriver

• Drill

• 3/8” Drill Bit

• Awl or similar marking tool

• 9/16” Open/Box End Wrench

• 9/16" Deep Well Socket

• A second person to help with

the installation

TOOLS AND RESOURCES REQUIRED

INSTALLING THE RIPTIDE INSTINCT QUEST

INSTALLATION

Power CablesPower Cables

DeployedDeployed StowedStowed

SideplateSideplate

ScrewScrew

SideplateSideplate

Mounting HolesMounting Holes

c. Remove the four Sideplate Screws using a #3 Phillips

Screwdriver. Two of these screws will be located on

each side of the mount.

d. Remove the Right Sideplate and the Left Sideplate to

expose the six mounting holes in the Base Extrusion.

NOTICE: The trolling motor weighs up to 90lb.

Minn Kota recommends having a second person help

with the installation.

a. Place the trolling motor (Item #6) on an elevated,

level surface, such as a workbench or the tailgate

of a pickup. The motor, as removed from the box,

should be in the stowed position.

b. Make sure that the Power Cables from the battery

are disconnected or that the breaker, if equipped,

is “o.”

WARNING

Make sure the motor is on a level surface and is not

connected to a power source.

ITEM(S) NEEDED

#6 x 1

INSTALLING THE RIPTIDE INSTINCT QUEST

e. Review the mounting considerations at the beginning

of the Installation section for proper clearance. Place

the motor on the bow of the boat at the intended

mounting location, as close to the centerline or keel

as possible. Ensure there is enough room for the

Shaft and Control Head and that they do not extend

o the side of the boat. The motor can be installed

on either the Port or Starboard side of the bow,

based on personal preference.

f. Position the motor so that the Slot in the Base

Extrusion is positioned beyond the boat Gunwale.

For proper clearance, the entire Slot must be visible

beyond the Gunwale. When the motor is deployed,

there must be a minimum required distance of 1½"

between the Gunwale and the bottom of the Steering

Housing and Shaft.

GunwaleGunwale

SlotSlot

BowBow

KeelKeel

3OutboardOutboard

InboardInboard

StarboardStarboard

PortPort

Drilling LocationsDrilling Locations

Drilling LocationsDrilling Locations Base ExtrusionBase Extrusion

OutboardOutboard

4h. With the motor at the intended mounting location,

take an Awl or similar tool and mark all six mounting

holes in the Base Extrusion.

i. Slide the motor aside to drill the mounting holes.

Drill through the boat deck using a Drill and a 3/8”

Drill Bit on all six marked locations.

j. Reposition the motor over the drilled holes to install

mounting hardware.

NOTICE: New mounting holes are required when

upgrading from an Ulterra to a Riptide Instinct QUEST.

New mounting holes will accommodate the higher

thrust motor and ensure the installation is secure.

NOTICE: The mounting surface for the Riptide Instinct

QUEST must be ﬂat. Rubber Washers can be used to

shim the Base Extrusion ﬂat before hardware is tightened.

1½"1½"

MinimumMinimum

GunwaleGunwale

ShaftShaft

SteeringSteering

HousingHousing

g. When mounting the Riptide Instinct QUEST, all

six mounting holes must be used. If the desired

mounting location does not allow for all six mounting

holes, a Boat Deck Reinforcement Kit (1854058)

should be used or a new mounting location selected.

CAUTION

Illustrations are for reference only. Do not deploy the motor

until it is fully mounted to the boat. Deploying the motor

before it is mounted to the boat may cause injury.

INSTALLING THE RIPTIDE INSTINCT QUEST

5ITEM(S) NEEDED

#1 x 6 #2 x 6 #3 x 6 #4 x 6 #5 x 1

Hex HeadHex Head

Cap ScrewCap Screw

Hex HeadHex Head

Cap ScrewCap Screw

RubberRubber

WasherWasher

BaseExtrusionBase Extrusion

Boat DeckBoat Deck

Backup BarBackup Bar

Nylock NutNylock Nut

k. Take six Hex Head Cap Screws (Item #1) and apply

anti-seize (Item #5) to each Screw. Insert the Screws

through the Base Extrusion and into each of the

drilled locations. If Rubber Washers (Item #3) are

used, the Rubber Washers should sit between the

Base Extrusion and boat deck.

l. Place a Backup Bar (Item #4) and then a Nylock Nut

(Item #2) on the end of each Screw. Tighten with a

9/16" Box End or Open End Wrench. Make sure all

hardware is secure.

NOTICE: To prevent seizing of the stainless steel

hardware, do not use high-speed installation tools.

Wetting the screws or applying an anti-seize (Item #5)

may help prevent seizing.

NOTICE: Use extra care to avoid pinching and

damaging the sensor wires that run alongside the

Base Extrusion when installing and tightening the

mounting hardware.

66m

SideplateSideplate

ScrewScrew

SideplateSideplate

m. Replace the Right Sideplate and Left Sideplate.

Replace the four Sideplate Screws using a #3 Phillips

Screwdriver. Two of these screws will be located on

each side of the mount.

NOTICE: When reinstalling the Sideplates, use care to

avoid pinching the sensor wires that run alongside the

Base Extrusion.

NOTICE: Ensure that the area between the Mount

and Steering Housing is clean and free of debris

and that no installation hardware has fallen in. The

Mount contains a Stow Pad that contacts the Steering

Housing when stowed. The motor cannot stow

securely if an obstruction is present on the Stow Pad.

BATTERY & WIRING INSTALLATION

BOAT RIGGING & PRODUCT INSTALLATION

For safety and compliance reasons, we recommend that you follow American Boat and Yacht Council (ABYC) standards when rigging

your boat. Altering boat wiring should be completed by a qualiﬁed marine technician. The following speciﬁcations are for general

guidelines only:

CONDUCTOR GAUGE AND CIRCUIT BREAKER SIZING TABLE

This conductor and circuit breaker sizing table is only valid for the following assumptions:

1. No more than 2 conductors are bundled together inside of a sheath or conduit outside of engine spaces.

2. Each conductor has 105° C temp rated insulation.

3. No more than 3% voltage drop allowed at full motor power based on published product power requirements.

CAUTION

These guidelines apply to general rigging to support your Minn Kota motor. Powering multiple motors or additional electrical devices

from the same power circuit may impact the recommended conductor gauge and circuit breaker size. If you are using wire longer than

that provided with your unit, follow the conductor gauge and circuit breaker sizing table below. If your wire extension length is more than

25 feet, we recommend that you contact a qualiﬁed marine technician.

CAUTION

An over-current protection device (circuit breaker or fuse) must be used. Coast Guard requirements dictate that each ungrounded

current-carrying conductor must be protected by a manually reset, trip-free circuit breaker or fuse. The type (voltage and current rating)

of the fuse or circuit breaker must be sized accordingly to the trolling motor used. The table below gives recommended guidelines for

circuit breaker sizing.

Motor Thrust /

Model

Max

Amp Draw

Circuit Breaker Wire Extension Length

Amps Minimum 5 feet 10 feet 15 feet 20 feet 25 feet

QUEST 24V 60 60 Amp 24 VDC 6 AWG 6 AWG 4 AWG 4 AWG 2 AWG

QUEST 36V 60 60 Amp 36 VDC 6 AWG 6 AWG 6 AWG 6 AWG 4 AWG

Reference

United States Code of Federal Regulations: 33 CFR 183 – Boats and Associated Equipment ABYC E-11: AC and DC Electrical Systems on Boats

NOTICE: Wire Extension Length refers to the distance from the batteries to the trolling motor leads. Consult website for available

thrust options.

Autres manuels pour RIPTIDE INSTINCT QUEST

Table des matières

Autres manuels MINN KOTA Moteur

MINN KOTA

MINN KOTA ULTERRA QUEST Manuel utilisateur

MINN KOTA

MINN KOTA Endura 50 Manuel utilisateur

MINN KOTA

MINN KOTA RIPTIDE TERROVA Manuel utilisateur

MINN KOTA

MINN KOTA RIPTIDE TERROVA 1363707 Manuel utilisateur

MINN KOTA

MINN KOTA RIPTIDE TERROVA Manuel utilisateur

MINN KOTA

MINN KOTA TRAXXIS Manuel utilisateur

MINN KOTA

MINN KOTA ULTERRA Manuel utilisateur

MINN KOTA

MINN KOTA RIPTIDE POWERDRIVE Manuel utilisateur

MINN KOTA

MINN KOTA EO 1/2 HP Manuel utilisateur

MINN KOTA

MINN KOTA Riptide 80 ST Manuel utilisateur

MINN KOTA

MINN KOTA RIPTIDE TERROVA Manuel utilisateur

MINN KOTA

MINN KOTA MKA 32 QRB Manuel utilisateur

MINN KOTA

MINN KOTA FORTREX Manuel utilisateur

MINN KOTA

MINN KOTA EDGE Manuel utilisateur

MINN KOTA

MINN KOTA VANTAGE Manuel utilisateur

MINN KOTA

MINN KOTA Riptide Ulterra Manuel utilisateur

MINN KOTA

MINN KOTA ULTERRA Manuel utilisateur

MINN KOTA

MINN KOTA ULTERRA Guide de dépannage

MINN KOTA

MINN KOTA MAXXUM Series Manuel utilisateur

MINN KOTA

MINN KOTA 1810244 Manuel utilisateur

MINN KOTA

MINN KOTA RIPTIDE POWERDRIVE Manuel utilisateur

MINN KOTA

MINN KOTA EDGE 30 Manuel utilisateur

MINN KOTA

MINN KOTA TERROVA Manuel utilisateur

MINN KOTA

MINN KOTA ULTERRA Manuel utilisateur

Manuels Moteur populaires d'autres marques

Rotax

Rotax 125 senior MAX evo Manuel utilisateur

Kohler

Kohler K361 Manuel utilisateur

MTD

MTD OHV Series Manuel utilisateur

Kohler

Kohler COMMAND CH18-745 Manuel utilisateur

Mercury

Mercury D4.2L D-Tronic Manuel utilisateur

Selve

Selve SE Plus-RC Series Manuel utilisateur

Perkins

Perkins 1206E-E66TA Manuel utilisateur

Skov

Skov DA 174 Manuel

Rossi

Rossi TX11 Series Manuel utilisateur

Siemens

Siemens SIMOTICS T-1FW3 Feuille d'instructions

AL-KO

AL-KO PRO 350 Manuel utilisateur

MTU

MTU 12 V 4000 Lx4 Manuel utilisateur

Nanni

Nanni N3.30 Manuel d'instructions

Nanni

Nanni N5.160 CR2 Manuel utilisateur

KSB

KSB SuPreme Series Instructions d'installation

Hiwin

Hiwin EM1 Series Manuel utilisateur

Rotax

Rotax 912 i series Mode d'emploi

Siemens

Siemens SIMOTICS XP 1MB1 Manuel utilisateur