Minka-Aire DELANO II Mode d’emploi

INSTRUCTION MANUAL WARRANTY CERTIFICATE

DELANO II

U.S. Patents: D595,403; D597,655

This product is protected by United States Federal and/or State Law, including Patent, Trademark and/or Copyright laws.

Manual design and all elements of manual design are protected by U.S. Federal and/or State Law, including Patent, Trademark and/or Copyright laws.

Minka-Aire warrants to the original owner that this fan will be free fromdefects in material and workmanship for one

year from the date of purchase, excluding the motor. Minka-Aire warrants to the original owner that the motor in this fan

shall be free from defects in material and workmanship for as long as the original purchaser owns the fan, and it remains in

the original installation.

This is a limited warranty. Minka-Aire's only obligation under this limited warranty is to replace or repair, or refund the purchase price, in

Minka-Aire's sole discretion without charge to the original owner, of the fan once Minka-Aire confirms that the fan has a defect covered by this

limited warranty.

Call our customer service department at 1-800-307-3267 to obtain the name of the Minka-Aire authorized dealer closest to your location, or

contact us through our web site, www.minkagroup.net and write to: Ask Mr. Minka if you have any questions or require further assistance.

To obtain warranty service, the owner should return the fan along with proof of purchase to a Minka-Aire authorized dealer. The Minka-Aire

authorized dealer shall then, at its sole discretion: repair the fan, replace the fan, refund the purchase price less the amount directly attributable to

the consumer's prior usage of the fan, or if necessary instruct the consumer to contact Minka-Aire directly for warranty service. Minka-Aire will be

responsible for the cost of any repair, or replacement for any warranty service provided by a Minka-Aire authorized dealer for product under

warranty.

You may also at your preference obtain warranty service by returning the fan directly to Minka-Aire along with proof of purchase, your name

and return address, and a description of the claimed product defect. Pack carefully; damage sustained in return transit to Minka-Aire will be the

original owner's responsibility. Original owner shall be responsible to pay all shipping charges. To obtain warranty service, you may return a fan that

proves to be defective during the warranty period to the following address:

Minka-Aire - Warranty Service, 1151 W. Bradford Court, Corona, CA 92882

Date Purchased Store Purchased Model Number Serial Number

F711

This warranty shall not apply to fans which have been damaged in any way, including improper installation, damage as a result of the removal

of the fan from the origial installation, or damage in shipping. This warranty shall not apply to fans which have been subjected to use for which the

fan was not designed. The purchaser of the fan shall be responsible for any cost of removing the old fan, installing a new fan, or any other costs.

This limited warranty is in lieu of all other express warranties. This limited warranty excludes all incidental and consequential damages, and

Minka-Aire shall not under any circumstances be liable for incidental or consequential damages. Some States do not allow the exclusion of or

limitation of incidental or consequential damages, so the foregoing limitation or exclusion may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights which vary from State to State. We encourage you to promptly

complete and return the enclosed warranty registration card. However, return of the warranty registration card is not a condition of this warranty.

CONTENTS

INSTALLING THE MOUNTING PLATE............................................

INSTALLING THE LIGHT KIT...............................................................

INSTALLING THE LIGHT BULBS AND GLASS SHADE ...........

OPERATING THE REMOTE CONTROL/WALL CONTROL.....

CARE OF YOUR FAN..............................................................................

TROUBLESHOOTING............................................................................

SPECIFICATIONS.....................................................................................

SAFETY RULES....................................................................................

PACKAGE CONTENTS.....................................................................

INSTALLING THE MOUNTING BRACKET..............................

ELECTRICAL CONNECTIONS.......................................................

INSTALLING THE WALL TRANSMITTER................................

FINISHING THE INSTALLATION................................................

BLADE INSTALLATION..................................................................

1151 W. Bradford Court, Corona, CA 92882 For Customer Assistance Call: 1-800-307-3267

SAFETY RULES

1. Before you begin installing the fan, shut power off at the circuit breaker of the fuse box.

2. Be cautious! Read all instructions and safety information before installing your new fan. Review accompanying assembly diagrams.

3. Make sure that all electrical connections comply with local codes, ordinances, or National Electrical Codes. Hire a qualified electrician or consult a

do-it-yourself wiring handbook if you are unfamiliar with installing electrical wiring.

4. Make sure the installation site you choose allows the fan blades to rotate without any obstructions. Allow a minimum clearance of 7 feet from the

floor and 18 inches from the tip of the blades to the wall.

5. If you are mounting the fan to a ceiling fan outlet box, use a U.L. Listed metal octagonal outlet box marked "Acceptable for Fan Support". Secure the

box directly to the building structure. The outlet box and its support must be able to support the moving weight of the fan (at least 50 pounds) Do

not use a plastic box.

6. Caution: To reduce the risk of injury use only the screws provided with the outlet box in conjunction with the lock washers provided with the fan.

7. If you are mounting the fan to a joist, make sure it is able to support the moving weight of the fan (at least 50 pounds).

8. After you install the fan, make sure that all mounting components are secured to prevent the fan from falling.

9. Do not insert anything into the fan blades while the fan is operating.

10. To operate the reverse function on this fan, press the reverse button while the fan is running.

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR OTHER PERSONAL INJURY, MOUNT FAN ONLY TO A U.L. LISTED OUTLET BOX OR SUPPORTING SYSTEM

MARKED ACCEPTABLE FOR FAN SUPPORT AND USE MOUNTING SCREWS PROVIDED WITH THE OUTLET BOX IN CONJUCTION WITH THE LOCK WASHERS

PROVIDED WITH THE FAN. MOST OUTLET BOXES COMMONLY USED FOR FAN SUPPORT OF LIGHTING FIXTURES ARE NOT ACCEPTABLE FOR FAN SUPPORT AND

NEED TO BE REPLACED. CONSULT A QUALIFIED ELECTRICIAN IF IN DOUBT.

TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND THE BLADE HOLDERS WHILE INSTALLING, BALANCING THE BLADES OR CLEANING THE FAN. DO NOT

INSERT FOREIGN OBJECTS BETWEEN ROTATING FAN BLADES.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT USE THIS WITH ANY SOLID-STATE SPEED CONTROL DEVICE.

NOTE: The important safeguards and instructions appearing in this manual are not meant to cover all possible conditions and situations that may

occur. It must be understood that common sense, caution and care are factors which can not be built into this product. These factors must be

supplied by the person (s) installing, caring for and operating the unit.

NOTE:READ AND SAVE ALL INSTRUCTIONS!

1. Fan Blades (5)

2. Mounting bracket

3. Fan motor ass'y

4. Motor housing

5. Blade holders (5)

6. Mounting plate

7. Light kit

8. Glass shade

9a. Wall transmitter Incl. 2 mounting

screws and 3 wire nuts

9b. Wall plate w/2 mounting screws

10. Extra Wall Plate w/2 Mounting

screws

11. 50W Mini-Can halogen bulbs (2)

12. Balancing kit

A. Mounting hardware:

#10 x 1.5" Wood screws (2)

#8 x 3/4" Machine screws (2)

Lock washers (2)

4mm star washers (2)

Wire nuts (3)

Washers (2)

B. Blade attachment hardware:

3/16" x 12.3 mm screws (16)

Rubber washers (16)

C. Bracket holder hardware:

1/4" x 1/2" Screws with lock washers (11)

PACKAGE CONTENTS

Unpack your fan and check the contents. You should have the following items:

Tools Required: Phillips screw driver; slotted screw driver; step-ladder; wire cutters; electrical tape.

INSTALLING THE MOUNTING BRACKET

WARNING: All of the parts, hardware and components have been provided for your safety and the proper

installation of your new ceiling fan. The use of other parts, hardware or components not supplied by

Minka Aire® with the fan will void the Minka Aire® Warranty.

REMEMBER To turn off the power. Follow the steps below to hang your fan properly.

Step 1. Attach the mounting bracket to the outlet box with two screws and washers provided with the

outlet box. Make sure the bracket is tight and secured. (Fig. 1)

Step 2. Lift fan into position by hanging the motor assembly onto the hook from the ceiling mounting

bracket allowing it to hang freely. (Fig. 1)

FIG. 1

OUTLET BOX

MOUNTING BRACKET

MOTOR

WARNING: To avoid possible electrical shock be sure electricity is

turned off at the main fuse or breaker box before wiring.

NOTE: The Aire Control® System is equipped with a learning frequency

function which has 256 code combinations to prevent potential

interference from other remote units. The frequency on your Receiver

and Transmitter units have been preset at the factory. (Fig.2) No

frequency change is necessary, should you desire to install another fan

within the same home or area with a seperate frequency code please see

the "frequency interference" troubleshooting section of this instruction

manual to learn how to change the frequency.

Caution! The dip switches on the receiving unit are covered with a rubber

cover, remove the rubber cover and then have it replaced after making any

changes to the dip switches.

Step 1 Connect the fan supply (black) wire to the black household supply

wire as shown in Figure 3 & 4.

Step 2. Connect the neutral fan (white) wire to the white neutral

household wire.

Step 3 Connect the fan ground wire (green) to the household ground wire.

Step 4. After all splices are made, check to make sure there are no loose

strands. As an additional precaution we suggest to secure the plastic wire

connectors to the wires with electrical tape.

ELECTRICAL CONNECTIONS

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Minka-Aire Ventilateur

Minka-Aire

Minka-Aire CONTRACTOR Mode d’emploi

Minka-Aire

Minka-Aire Gyrette F302 Mode d’emploi

Minka-Aire

Minka-Aire Pancake F738 Manuel utilisateur

Minka-Aire

Minka-Aire F516 Manuel utilisateur

Minka-Aire

Minka-Aire ARTEMIS Manuel utilisateur

Minka-Aire

Minka-Aire Facets Manuel utilisateur

Minka-Aire

Minka-Aire TRADITIONAL CONCEPT Mode d’emploi

Minka-Aire

Minka-Aire Taos F661 Manuel utilisateur

Minka-Aire

Minka-Aire Bolo Mode d’emploi

Minka-Aire

Minka-Aire ARTEMIS XL5 Manuel utilisateur

Minka-Aire

Minka-Aire CONTRACTOR Series Manuel utilisateur

Minka-Aire

Minka-Aire contactor F547 Manuel utilisateur

Minka-Aire

Minka-Aire uchiwa Mode d’emploi

Minka-Aire

Minka-Aire SUPRA 44 Manuel utilisateur

Minka-Aire

Minka-Aire High Sierra F612 Manuel utilisateur

Minka-Aire

Minka-Aire Alva F852L Mode d’emploi

Minka-Aire

Minka-Aire CONTRACTOR Manuel utilisateur

Minka-Aire

Minka-Aire CONCEPT I WET Mode d’emploi

Minka-Aire

Minka-Aire CONCEPT I WET F477L Manuel utilisateur

Minka-Aire

Minka-Aire CONCEPT II F518 Mode d’emploi

Minka-Aire

Minka-Aire Traditional Gyro Manuel utilisateur

Minka-Aire

Minka-Aire Riva Manuel utilisateur

Minka-Aire

Minka-Aire F601 Acero Manuel utilisateur

Minka-Aire

Minka-Aire Volterra F702L Manuel utilisateur

Manuels Ventilateur populaires d'autres marques

ELTA FANS

ELTA FANS H03VV-F Manuel utilisateur

Hunter

Hunter 20714 Manuel d'instructions

Emerson

Emerson CARRERA VERANDA CF542ORB00 Manuel utilisateur

Hunter

Hunter Caraway Manuel d'instructions

Panasonic

Panasonic FV-15NLFS1 Manuel utilisateur

Kompernass

Kompernass KH 1150 Manuel utilisateur

VES

VES FALA100/12V/TR Manuel utilisateur

Vertiv

Vertiv Liebert DCD Manuel utilisateur

Westinghouse

Westinghouse GFP Series Manuel utilisateur

Venmar

Venmar KUBIX HRV PLUS Series Manuel utilisateur

Maico

Maico ECR 31 Manuel utilisateur

Sonnenkonig

Sonnenkonig Dinky Manuel utilisateur

S&P

S&P ECOWATT HXBR Manuel utilisateur

Wider

Wider IMP03369BH Manuel utilisateur

Panasonic

Panasonic F-60DHN Manuel utilisateur

Hinkley

Hinkley HIGHLAND Manuel utilisateur

Broan

Broan 766BN Manuel utilisateur

Premium

Premium PFS16022 Instructions de montage