Minka-Aire TRADITIONAL CONCEPT Mode d’emploi
INSTRUCTION MANUAL WARRANTY CERTIFICATE
TRADITIONAL CONCEPT
BY
TM
Manual design and all elements of manual design are protected by U.S. Federal and/or State Law, including Patent, Trademark and/or Copyright laws.
Minka-Aire®warrants to the original owner that this fan will be free from defects in material and workmanship for one
year from the date of purchase, excluding the motor. Minka-Aire®warrants to the original owner that the motor in this fan
shall be free from defects in material and workmanship for as long as the original purchaser owns the fan, and it remains in
the original installation.
This is a limited warranty. Minka-Aire's®only obligation under this limited warranty is to replace or repair, or refund the purchase price, in
Minka-Aire's®sole discretion without charge to the original owner, of the fan once Minka-Aire®confirms that the fan has a defect covered by this
limited warranty.
Call our customer service department at 1-800-307-3267 to obtain the name of the Minka-Aire®authorized dealer closest to your location, or
contact us through our web site, www.minkagroup.net and write to: Ask Mr. Minka if you have any questions or require further assistance.
To obtain warranty service, the owner should return the fan along with proof of purchase to a Minka-Aire®authorized dealer. The Minka-Aire®
authorized dealer shall then, at its sole discretion: repair the fan, replace the fan, refund the purchase price less the amount directly attributable to the
consumer's prior usage of the fan, or if necessary instruct the consumer to contact Minka-Aire®directly for warranty service. Minka-Aire®will be
responsible for the cost of any repair, or replacement for any warranty service provided by a Minka-Aire®authorized dealer for product under warranty.
You may also at your preference obtain warranty service by returning the fan directly to Minka-Aire®along with proof of purchase, your name and
return address, and a description of the claimed product defect. Pack carefully; damage sustained in return transit to Minka-Aire®will be the original
owner's responsibility. Original owner shall be responsible to pay all shipping charges. To obtain warranty service, you may return a fan that proves to
be defective during the warranty period to the following address:
Minka-Aire®- Warranty Service, 1151 W. Bradford Court, Corona, CA 92882
Date Purchased Store Purchased Model Number Serial Number
F593
This warranty shall not apply to fans which have been damaged in any way, including improper installation, damage as a result of the removal
of the fan from the origial installation, or damage in shipping. This warranty shall not apply to fans which have been subjected to use for which the
fan was not designed. The purchaser of the fan shall be responsible for any cost of removing the old fan, installing a new fan, or any other costs.
This limited warranty is in lieu of all other express warranties. This limited warranty excludes all incidental and consequential damages, and
Minka-Aire®shall not under any circumstances be liable for incidental or consequential damages. Some States do not allow the exclusion of or
limitation of incidental or consequential damages, so the foregoing limitation or exclusion may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from State to State. We encourage you to promptly
complete and return the enclosed warranty registration card. However, return of the warranty registration card is not a condition of this warranty.
CONTENTS
INSTALLING THE LIGHT KIT MOUNTING PLATE .....................
INSTALLING THE LIGHT PLATE..........................................................
INSTALLING THE LIGHT BULB AND GLASS SHADE .............
OPERATING THE REMOTE CONTROL/WALL CONTROL .....
CARE OF YOUR FAN.............................................................................
TROUBLESHOOTING...........................................................................
SPECIFICATIONS....................................................................................
1
2
3
4
5
6
7
8
9
10
11
12
13
14
SAFETY RULES............................................................................................
PACKAGE CONTENTS............................................................................
INSTALLING THE MOUNTING BRACKET.....................................
ELECTRICAL CONNECTIONS..............................................................
INSTALLING THE WALL TRANSMITTER.......................................
FINISHING THE INSTALLATION.......................................................
BLADE INSTALLATION..........................................................................
1151 W. Bradford Court, Corona, CA 92882 For Customer Assistance Call: 1-800-307-3267
1
SAFETY RULES
1. Before you begin installing the fan, shut power off at the circuit breaker of the fuse box.
2. Be cautious!
Be cautious!
Read all instructions and safety information before installing your new fan. Review accompanying assembly diagrams.
3. Make sure that all electrical connections comply with local codes, ordinances, or National Electrical Codes. Hire a qualified electrician or consult a
do-it-yourself wiring handbook if you are unfamiliar with installing electrical wiring.
4. Make sure the installation site you choose allows the fan blades to rotate without any obstructions. Allow a minimum clearance of 7 feet from the
floor and 18 inches from the tip of the blades to the wall.
5. If you are mounting the fan to a ceiling fan outlet box, use a U.L. Listed metal octagonal outlet box marked "Acceptable for Fan Support". Secure
the box directly to the building structure. The outlet box and its support must be able to support the moving weight of the fan (at least 50
pounds) Do not use a plastic box.
6. Caution:
Caution:
To reduce the risk of injury use only the screws provided with the outlet box in conjunction with the lock washers provided with the fan.
7. If you are mounting the fan to a joist, make sure it is able to support the moving weight of the fan (at least 50 pounds).
8. After you install the fan, make sure that all mounting components are secured to prevent the fan from falling.
9. Do not insert anything into the fan blades while the fan is operating.
10. Turn the fan off and wait for the blades to stop completely before proceeding with maintenance or cleaning. SUITABLE FOR USE IN
WET LOCATIONS
WARNING
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR OTHER PERSONAL INJURY, MOUNT FAN ONLY TO A U.L. LISTED OUTLET BOX OR
SUPPORTING SYSTEM MARKED ACCEPTABLE FOR FAN SUPPORT AND USE MOUNTING SCREWS PROVIDED WITH THE OUTLET BOX IN
CONJUCTION WITH THE LOCK WASHERS PROVIDED WITH THE FAN. MOST OUTLET BOXES COMMONLY USED FOR FAN SUPPORT OF
LIGHTING FIXTURES ARE NOT ACCEPTABLE FOR FAN SUPPORT AND NEED TO BE REPLACED. CONSULT A QUALIFIED ELECTRICIAN IF IN DOUBT.
TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND THE BLADE HOLDERS WHILE INSTALLING, BALANCING THE BLADES OR CLEANING
THE FAN. DO NOT INSERT FOREIGN OBJECTS BETWEEN ROTATING FAN BLADES.
TO REDUCE THE RISK OF FIRE OR ELECTRONIC SHOCK, THIS FAN ONLY CAN USE UC7067RC SOLID-STATE SPEED CONTROL WITH UC9040T
WALL CONTROL ONLY.
NOTE:
NOTE:
The important safeguards and instructions appearing in this manual are not meant to cover all possible conditions and situations that may
occur. It must be understood that common sense, caution and care are factors which can not be built into this product. These factors must be
supplied by the person(s) installing, caring for and operating the unit.
NOTE:
NOTE:
READ AND SAVE ALL INSTRUCTIONS!
2
1. Fan Blades (3)
2. Mounting bracket
3. Fan motor/housing ass'y
4. Blade support plates (3)
5. Light kit mounting plate
6. Light plate
7. Glass shade
8. Metal light cover (for optional use)
9a. Wall transmitter Incl. 2 mounting
screws and 3 wire nuts
9b. Wall plate w/2 mounting screws
10. Extra Wall Plate w/2 Mounting
screws
11. 100W Mini-Can halogen bulb
12. Balancing kit
A. Mounting hardware:
#10 x 1.5" Wood screws (2)
#8 x 3/4" Machine screws (2)
Lock washers (2)
4mm star washers (2)
Wire nuts (3)
Washers (2)
B. Blade attachment hardware:
3/16" x 12.3 mm Screws (10)
Rubber washers (10)
PACKAGE CONTENTS
1
2
4
3
8
9a
9b
7
5
6
Unpack your fan and check the contents. You should have the following items:
A
B
11
10
12
3
Tools Required: Phillips screw driver; slotted screw driver; step-ladder; wire cutters; electrical tape.
INSTALLING THE MOUNTING BRACKET
WARNING
WARNING:
All of the parts, hardware and components have been provided for your safety and the proper
installation of your new ceiling fan. The use of other parts, hardware or components not supplied by
Minka Aire®with the fan will void the Minka Aire®Warranty.
REMEMBER
REMEMBER
to turn off the power. Follow the steps below to hang your fan properly:
Step 1. Attach the mounting bracket to the outlet box with two screws and washers provided with the
outlet box. Make sure the bracket is tight and secured. (Fig. 1)
Step 2. Lift fan into position by hanging the motor assembly onto the hook from the ceiling mounting
bracket allowing it to hang freely. (Fig. 1)
FIG. 1
OUTLET BOX
MOTOR
MOUNTING BRACKET
4
WARNING:
WARNING:
To avoid possible electrical shock be sure electricity is
turned off at the main fuse or breaker box before wiring.
NOTE:
NOTE:
The Aire Control®System is equipped with a learning frequency
function which has 256 code combinations to prevent potential
interference from other remote units. The frequency on your Receiver
and Transmitter units have been preset at the factory. (Fig. 2) No
frequency change is necessary, should you desire to install another fan
within the same home or area with a seperate frequency code please see
the "frequency interference" troubleshooting section of this instruction
manual to learn how to change the frequency.
Step 1 Connect the fan supply (black) wire to the black household supply
wire as shown in Figure 3 & 4.
Step 2. Connect the neutral fan (white) wire to the white neutral
household wire.
Step 3 Connect the fan ground wire (green) to the household ground wire.
Step 4. After all splices are made, check to make sure there are no loose
strands. As an additional precaution we suggest to secure the plastic wire
connectors to the wires with electrical tape.
ELECTRICAL CONNECTIONS
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Minka-Aire Ventilateur
Minka-Aire
Minka-Aire High Sierra F612 Manuel utilisateur
Minka-Aire
Minka-Aire GYRO WET Mode d’emploi
Minka-Aire
Minka-Aire Cristafano Manuel utilisateur
Minka-Aire
Minka-Aire F601 Acero Manuel utilisateur
Minka-Aire
Minka-Aire Light wave F844 Manuel utilisateur
Minka-Aire
Minka-Aire contactor F547 Manuel utilisateur
Minka-Aire
Minka-Aire contactor F547 Manuel utilisateur
Minka-Aire
Minka-Aire Flyte Manuel utilisateur
Minka-Aire
Minka-Aire SPACESAVER Mode d’emploi
Minka-Aire
Minka-Aire Ultra F588-SP Manuel utilisateur
Minka-Aire
Minka-Aire JAVA F753 Mode d’emploi
Minka-Aire
Minka-Aire Alva F852L Mode d’emploi
Minka-Aire
Minka-Aire LUN-AIRE Mode d’emploi
Minka-Aire
Minka-Aire CONCEPT II F518 Mode d’emploi
Minka-Aire
Minka-Aire ALUMA Mode d’emploi
Minka-Aire
Minka-Aire CONCEPT I WET F477L Manuel utilisateur
Minka-Aire
Minka-Aire F580 Manuel utilisateur
Minka-Aire
Minka-Aire Traditional Gyro Manuel utilisateur
Minka-Aire
Minka-Aire F568 Manuel utilisateur
Minka-Aire
Minka-Aire CONCEPT I WET Mode d’emploi
