MinimumRC KI-61 Tony Manuel utilisateur

Table des matières

Autres manuels MinimumRC Jouet

MinimumRC

MinimumRC F8F Rare Bear Manuel

MinimumRC

MinimumRC P-51 Mustang Manuel utilisateur

MinimumRC

MinimumRC Sopwith Camel Manuel utilisateur

MinimumRC

MinimumRC LISA Manuel utilisateur

MinimumRC

MinimumRC Beech V-35 Manuel

MinimumRC

MinimumRC DH-88 Comet Manuel utilisateur

MinimumRC

MinimumRC R-51 Mustang Manuel utilisateur

MinimumRC

MinimumRC Messerschmitt BF-109 Manuel utilisateur

MinimumRC

MinimumRC Cessna L-19 Manuel utilisateur

MinimumRC

MinimumRC T-28 Trojan Manuel utilisateur

MinimumRC

MinimumRC Fan-Jet 600 Manuel utilisateur

MinimumRC

MinimumRC Tigermoth Manuel utilisateur

MinimumRC

MinimumRC Minimoa Manuel utilisateur

MinimumRC

MinimumRC P-51 Mustang Manuel utilisateur

MinimumRC

MinimumRC A6M5-D Manuel utilisateur

MinimumRC

MinimumRC ASG-32 Manuel utilisateur

MinimumRC

MinimumRC F8F Rare Bear Manuel

MinimumRC

MinimumRC NANCHANG CJ-6 Manuel utilisateur

MinimumRC

MinimumRC T-28 Trojan Manuel utilisateur

MinimumRC

MinimumRC Cessna-152 Manuel utilisateur

MinimumRC

MinimumRC Spacewalker V2 Manuel utilisateur

MinimumRC

MinimumRC Cessna L-19 Manuel utilisateur

MinimumRC

MinimumRC Shrimp V2 Manuel utilisateur

MinimumRC

MinimumRC PZL106 Q Series Manuel utilisateur

Manuels Jouet populaires d'autres marques

marklin

marklin 37321 Manuel utilisateur

Canon

Canon PAPER CRAFT Manuel utilisateur

GREAT PLANES

GREAT PLANES Pitts M-12S Manuel utilisateur

NOCH

NOCH 14261 Manuel utilisateur

Hausler

Hausler 450 SE V2 Manuel utilisateur

Dynaflite

Dynaflite Daydream Manuel utilisateur

MiniacRC

MiniacRC MIGHTY MINI P40 WARHAWK Manuel

Kenner

Kenner Batman 63651 Manuel utilisateur

LEGO

LEGO 8527 Manuel utilisateur

iKarus

iKarus ECO 8 Manuel utilisateur

Multiplex

Multiplex EasyStar II Mode d’emploi

Walkera

Walkera 38 Mode d’emploi

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE Manuel utilisateur

MD

MD MXION SWD Manuel utilisateur

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway Manuel utilisateur

marklin

marklin 39671 Manuel utilisateur

Meccano

Meccano 15103 Manuel utilisateur

LEGO

LEGO TECHNIC 8735 Manuel utilisateur

KI-61 Tony

Assembly Instructions

Important Instructions

1.The model is supplied with UFO and 502 glue. UFO is for bonding foam parts, and 502 for bonding

wood, carbon fiber and metal parts. 502 glue will cause serious corrosion to foam parts.

2.Please wait for the glue to dry and solidify in each installation step before the next installation.

3.Please avoid using flame to heat the heat shrinkable tube on the model. Electric iron shall be used

for heating.

4.Please use razor blade to remove the parts from the plate. Do not tear the parts by force.

1. Fuselage wooden frame parts.

2. Assemble the fuselage wooden frame.

3. Continue assembling the wooden frame and install the motor.

4. Install the servo as shown. (Top view of the parts)

5.

6. Install the servo as shown. (Bottom view of the parts)

7. Magnets and its supporting structures.

8. Install the magnet.

9. Install the assembled magnet-supporting structure onto the wooden frame at the

corresponding location.

10. The landing gear servo uses a cross-shaped arm.

11. Remove the two opposite arms of the cross-shaped arm (as shown in the diagram).

12. Install the arm onto the landing gear servo.

13. Connect the receiver to the servos, secure the receiver with Velcro, power it on, and

bind it to the transmitter to ensure that the servo arms return to their neutral positions.

Test if the servos are functioning correctly and install the servos and arms as shown in the

diagram. Note: This step is crucial; make sure the servos are powered, the arms are

centered, and follow the diagram precisely. Adjustments cannot be made after the model

is assembled.

14. airframe components.

15. Use a sharp tool (screwdriver) to score through the marked lines on the bottom of the

fuselage.

16. Use glue to secure the wooden frame and attach the fuselage to one sides of the

wooden frame, with the side marked with lines facing inward.

17. PS foam parts.

18. Press the fuselage inward along the score lines and use glue to install the bulkhead.

19. Use glue to secure the foam board at the bottom of the tail of the aircraft.

20. Use glue to secure the cockpit foam board.

21. Use glue to secure the nose filler plate.

22. Use glue to secure the front fuselage top plate.

23. Use glue to secure the fuselage bottom plate, do not apply glue to the red-lined

section.

24. Use glue to secure the bottom and top plates.

25. Install the air vent top plate.