Mini Gadgets OmniSBottle Manuel utilisateur
1 Version 1.0
OmniEye Soda Bottle with
Hidden Camera
SKU: OmniSBottle
2 Version 1.0
THANK YOU FOR PURCHASING THE
OMNISBOTTLE HIDDEN CAMERA
Please read this manual before operating the
camera and keep it handy.
Your purchase should include:
1 x OmniSBottle
1 x AC Wall Adapter
1 x Manual
1 x A/V Cable
1 x 3.5mm to USB Cable
1 x MicroUSB Cable
1 x Remote
1 x Battery Charger
1 x 16GB MicroSD Card
1 x MicroSD Card Reader
1 x Tweezers
3 Version 1.0
GET FAMILIAR WITH YOUR OMNISBOTTLE HIDDEN
CAMERA
4 Version 1.0
5 Version 1.0
6 Version 1.0
IMPORTANT WARRANY INFORMATION: If the
warranty sticker on your device has been removed or
tampered with, your lifetime warranty will be voided.
You may be charged fees or denied a return should this
happen.
HOW TO CHARGE THE CAMERA
Note: If you are not located in the US, or if you intend
to use this product anywhere other than the US, you
will need to purchase a converter in order to use the AC
wall plug in and avoid damaging the product. Because
different countries use different voltages in their
electrical wiring, you will need a converter that adapts
to the current in your particular country.
The OmniSBottle has 2 methods of charging:
1. First, you can connect the provided charging
cable to the battery charging port on the 3D
printed housing inside the bottle (see page 3).
The LED indicator light will be on as long as the
cable is connected. We recommend charging
for 4-6 hours to get a full charge.
7 Version 1.0
2. Secondly, you may remove the battery from the
housing, disconnect the battery connection and
then use the matching charging connector and
wall jack that was provided in your box to
charge the battery via a wall outlet (see page
5). While charging, there will be a red indicator
light, and when the battery is fully charged, the
light will become blue.
OPERATING THE CAMERA
HOW TO TURN ON THE CAMERA
1. Your device can be powered on in one of two
ways.
a. Connect your device to an AC outlet
using the provided AC wall charger.
b. Use the internal battery to power the
device.
2. If you plug the device into an electrical outlet,
the device will power on automatically and
enter into motion detection mode. The Green
light will blink once, then the Red light will blink
8 Version 1.0
3 more times and turn off (if motion is detected
immediately). The device is now in motion
detection mode.
3. If you choose to use battery power, point the
remote at the device and press the power
button on the remote (see page 4). The Green
light will blink once and then the Red light will
blink 3 more times and turn off (if motion is
detected immediately). The device is now in
motion detection mode.
NOTE: If the light doesn’t come on, try many different
angles when pressing the power button and pointing it
at the front/top of the unit. Do not hold down the power
button. Press and release the button only.
4. To put the device into standby mode, stop
motion recording by pressing the motion
detection button one time (see page 4). The
Green light will come on, and the device will be
in standby mode.
9 Version 1.0
HOW TO RECORD VIDEO
1. When the camera is in Standby Mode, press the
“Continuous Recording Button” (see page 4).
The Indicator LED will flash two times.
2. Once the Indicator LED turns off, the camera is
now recording video.
HOW TO STOP RECORDING VIDEO
1. While the camera is recording video, press the
“Continuous Recording Button” once more.
(The Indicator LED will turn on.)
2. The camera has now stopped recording and is
now in Standby Mode.
HOW TO TAKE PICTURES
1. When the camera is in Standby Mode, press the
“Photo Button” (see page 4). The green light
will turn red while the photo is being taken.
2. Once the photo is taken, the light will turn back
to green and once again be in standby mode.
HOW TO RECORD MOTION DETECTION
10 Version 1.0
1. When the camera is in Standby Mode, press the
“Motion Detection Button” (see page 4).
2. If motion is detected, the Red light will flash 2
times and turn off.
3. If there is no motion after 1 minute, the device
will return to detection standby mode until
motion is detected again. While waiting, the
Green light will be on.
NOTE: If you activate motion detection and there is no
motion currently in front of the camera, there will be no
indication you have entered into motion mode. The green
light will simply remain on. If you wish to confirm that
you have entered into motion detection mode, wave your
hand in front of the camera lens and the unit will flash
the red light 2 times and then the light will turn off
confirming that the device detected your motion and is
now recording video.
HOW TO STOP RECORDING MOTION DETECTION
Table des matières
Autres manuels Mini Gadgets Appareil photo numérique
Mini Gadgets
Mini Gadgets HCBulb Manuel utilisateur
Mini Gadgets
Mini Gadgets KCLM200WiFi Manuel utilisateur
Mini Gadgets
Mini Gadgets HCBluetoothHD Manuel utilisateur
Mini Gadgets
Mini Gadgets B3000 Manuel utilisateur
Mini Gadgets
Mini Gadgets OmniCoffeeLid Manuel utilisateur
Mini Gadgets
Mini Gadgets HS580 Manuel utilisateur
Mini Gadgets
Mini Gadgets BB2KDECOYOUTLET Manuel utilisateur
Mini Gadgets
Mini Gadgets DIYNV Manuel utilisateur
Mini Gadgets
Mini Gadgets HCNewsboyHat Manuel utilisateur
Mini Gadgets
Mini Gadgets BBSRBDictionary Manuel utilisateur
Mini Gadgets
Mini Gadgets UWDVR Manuel utilisateur
Mini Gadgets
Mini Gadgets HCBluetooth Manuel utilisateur
Mini Gadgets
Mini Gadgets BBSStaketimer Manuel utilisateur
Mini Gadgets
Mini Gadgets HCHook Manuel utilisateur
Mini Gadgets
Mini Gadgets BBWiFiSolarLED Manuel utilisateur
Mini Gadgets
Mini Gadgets BBSROUTER Manuel utilisateur
Mini Gadgets
Mini Gadgets MCC1080Wifi Manuel utilisateur
Mini Gadgets
Mini Gadgets OmniBCan Manuel utilisateur
Mini Gadgets
Mini Gadgets HCWiFiNightLight Manuel utilisateur
Mini Gadgets
Mini Gadgets LMWiFiCase Manuel utilisateur
