vii
Setting the reference value for dot misalignment correction
[PG DROP ADJUST.] ....................................................................................3-43
Checking for nozzle clogging, and unclogging nozzles...........................3-45
Printing a test pattern (test printing).......................................................3-45
Relationship between head row and test pattern...................................3-46
If the printed pattern is abnormal (Cleaning)..........................................3-46
If nozzles cannot be unclogged [FILL UP INK] ......................................3-48
Correcting the media feed rate [MEDIA COMP.]........................................3-50
If dots are not in alignment [DROP.POScorrect] .......................................3-52
Effective Plotting Area .................................................................................3-54
Establishing the Origin ................................................................................3-55
Printing an image .........................................................................................3-57
Starting the printing operation................................................................3-57
Interrupting the printing operation ..........................................................3-58
Cutting the media after completion of printing .......................................3-59
Automatic cleaning.................................................................................3-62
Maintenance while Printing
(When dedicated sublimation transfer ink is used) ................................3-64
Display of [INK NEAR END] or [INK END] ..................................................3-67
Indication of remaining amount of ink for each cartridge .......................3-67
Change the operation condition of the ambient temperature ..................3-70
Extension of Ink Expiry Month ....................................................................3-72
When a cartridge extended the expiry month is set...............................3-73
When an ink expiry month is extended ..................................................3-73
Switch Setting of Ink Supply Path ..............................................................3-74
When both ink cartridge and MBIS1 are used .......................................3-75
Turning the power off...................................................................................3-76
CHAPTER 4 Daily Care
Routine Maintenance .....................................................................................4-2
Precautions in cleaning............................................................................4-2
Notes on cleaning solution.......................................................................4-3
Cleaning exterior surfaces .......................................................................4-3
Cleaning the platen ..................................................................................4-3
Cleaning the media sensor (2 places) .....................................................4-4
Cleaning the media press ........................................................................4-4
Opening the maintenance cover ..............................................................4-5
Cleaning the wiper and ink caps [CARRIAGE OUT]....................................4-7
Cleaning the nozzle [NOZZLE WASH] ........................................................4-10
Cleaning the ink discharge passage [DISWAY WASH].............................4-14
