MIMAKI CJV150-75 Manuel utilisateur
Mimaki Europe B.V.
Sign Graphics Products
The new high quality Print&Cut entry models
Product Guide
The information in this document is subject to change without notice.
07-03-2019
V1.71EU
Mimaki Europe B.V.
Sign Graphics Products
Terms of use
•The contents of this presentation are intended only for Mimaki authorized
resellers. Authorized persons are not permitted to distribute, copy or change
this presentation without explicit approval of Mimaki Europe B.V.
•Contents and technical explanations in this presentation are based on the
test results achieved at Mimaki at the time of testing and are not a guarantee
for performance. Substrates should be tested beforehand.
•In addition, the contents in this presentation do not lead to any legal
obligations from Mimaki and Mimaki does not take any responsibility. Please
verify in advance whether your intended prints will result in sufficient
quality.
•Contents of this presentation are subject to change without prior notice for
improvement. Compositors errors reserved.
2
Mimaki Europe B.V.
Sign Graphics Products
Features
•Mimaki technologies for exceptional print quality
•Mimaki Advanced Pass System 3 (MAPS3) reduces banding and
produces smoother images
•Variable dot printing produces smoother gradients and quartertones
•Mimaki Expand Color mode is available for more vivid and high contrast
colors with RasterLink6*
•3-way intelligent heaters optimize dot gain
•A wide variety of inks broaden application
•Supports 6 different ink types: SS21, ES3, BS3, BS4, SB53 and SB54
•Printing metallic colors with high-intensity silver ink
•Wider color gamut printing with orange ink
•Light black ink produces accurate grayscale printing without color shifts
•White ink achieves high opacity printing
3
* Supported by RasterLink6 ver. 4.11 or later, and device profile ver. 3.5
Mimaki Europe B.V.
Sign Graphics Products
Features
•Versatile Print&Cut functions
•Zero margin crop mark reduces the waste of media
•Supports thin media such as heat transfer media by Cut & Print function
•Dotted line cut function cuts backing sheet leaving a few minimal joints
•Over cut and Corner cut functions cut edges sharp even using thick
media
•Segment compensation achieves accurate long-length cutting
•Continuous crop mark detection for unattended Print&Cut operation
•Several functions to support unattended operation
•Nozzle Check Unit allows printing without nozzle clogging
•UISS performs continuous ink supply while unattended printing
•Stable feeding of heavy media, max weight of 40kg and max diameter of
250mm
4
Mimaki Europe B.V.
Sign Graphics Products
System configuration
Options
MBIS3
Drying fan
Air exhaust unit
Static prevention sheet
Front cover
8x Eco-cartridge for 600ml BS3/BS4 inks
Including Rip software
PC
Works also with:
USB 2 0
5m(15ft) cable is recommended
Connection
Recommended PC configuration
CPU: Core i5 3.5GHz
Memory: 8GB
HDD: 500GB
I/F : USB2.0, 4 ports or more
ODD: DVD-ROM
Network: 1000BASE-T
Compatible OS: Windows Vista(32/64bit)
Windows 7(32/64bit)
Windows 8(32/64bit)
Windows 10(32/64bit)
Monitor: 1366x768
5
Mimaki Europe B.V.
Sign Graphics Products
Ink type
SS21 ES3 BS3 / BS4* Sb53 Sb54
Eco solvent Eco solvent
(Low odor) Solvent Sublimation Sublimation
Colors 10C*6C 4C 6C* 4C
Ink Sets
6C+WSi: Silver included 4C: High speed printing 4C: High speed printing 4C: High speed printing 4C: High speed printing
4C: High speed printing 6C: Smooth Result 6C: Smooth Result
8C: Smooth result &
vibrant expression
6C+WW: 6C plus white
printing
Lk/Or/W/Si included
Lk/Or/W 2 included
Ink
Capacity
MCYKLcLmLkOr:
-440ml cartridge
-2L Ink pack (for MBIS3)
WSi: 220ml cartridge
-440ml cartridge
-
600ml Ink pack
(with Eco-cartridge)
-2L Ink pack (for MBIS3)
-440ml cartridge
-2L Ink pack (for MBIS3) 2L Ink pack (for MBIS3)
**Up to 8 colors can be set
out of 10 colors. *BS4 has low odor *K is also available
M C Y KKY C M
M C Y KLc Lm Lk Or
MCYKKY C M
M C Y KKY C M
6
Ink type / Ink set
MT BLT YT KT KT YT BLT MT
6
M C Y KLk Or W W
M C Y KLk Or WSi
Mimaki Europe B.V.
Sign Graphics Products
Print head configuration
•1 print head configuration
•Capable of ejecting 7 different drop sizes of 4pl/7pl/8pl/14pl/16pl/24pl/35pl
•Works in high quality and high speed modes
•Delivers precision droplet placement in three sizes
7
Nozzle row length
Approx.25.4mm
(1 inch)
Nozzle width
Approx.31mm
(1.2 inch)
1-head:1440-nozzle
(180-nozzle x 8-lines)
123 4 5 6 7 8
Mimaki Europe B.V.
Sign Graphics Products
Highly versatile printer
•Larger ink drops
•3 different drop sizes are automatically selected from the 7 drop sizes,
depending on the selected print quality (profile)
•When working with SS21, the 7 drop sizes are 4/7/8/14/16/24/35pl
•For high speed printing with high densities, the variable dot technology with a
maximum dot size of 35pl is used. (45.4m²/h with SS21/BS3/BS4, and 48m²/h
with Sb53/Sb54)
•This gives the printer a wide coverage, from high resolutions, to low resolution
printing with higher densities
8
Case 1 : Maximum dot size =21pl Case 2 : Maximum dot size =35pl
Large
21ｐ
ｌ
Middle
14ｐ
ｌ
Small
4ｐ
ｌ
1 /360 inch
1 /360
inch
Large
35ｐ
ｌ
Middle
14ｐ
ｌ
Small
4ｐ
ｌ
1 /360 inch
1 /360
inch
Low density due to a gap between the dots
↓
Not suitable for high speed mode (low resolution)
High density with no gap between the dots
↓
Suitable for High speed mode
Mimaki Europe B.V.
Sign Graphics Products
1,7
3,6
5,4
7,1
8,5
10,5
12
1,9
4,2
6,2
8,2
9,8
12,2
14,3
0 5 10 15 20
Super Smooth
1440x1440,16P,Bi
High Quality
720x1440,12P,Bi
High Quality
720x1080,8P,Bi
Standard②
720x720,6P,Bi
Standard①
720x720,5P,Bi
High Speed
720x720,4P,Bi
Draft
540x720,4P,Bi
CJV150-107
CJV150-75
**
4,3
7,1
10,5
12
25
40,2
5,0
8,2
12,2
14,3
28,5
45,4
010 20 30 40 50
High Quality
720x1440,10P,Bi
Standard②
720x1080,6P,Bi
Standard①
720x720,4P,Bi
High Speed
540x720,4P,Bi
Draft
540x360,2P,Bi
Super Draft
360x360,1P,Bi
CJV150-107
CJV150-75
**
*
**
Print speed (SS21/BS3/BS4)
•Ink set: 4C, CMYK
9
PVC Banner
The print modes shown in this document are the performance of the printer itself. The profiles are created selectively depending on the media type. When the
profile is not available, use MPM-3 to create the profile for the media.
m²/h
m²/h
**
* MAPS works with “Quality priority” setting in RasterLink6
** MAPS does not work
*
Mimaki Europe B.V.
Sign Graphics Products
1,3
2,4
2,7
3,6
4,3
5,4
1,5
2,8
3,1
4,2
5,0
6,2
0 5 10 15
Super Smooth
1440x1440,20P,Bi
High Quality
720x1440,18P,Bi
Standard②
720x1080,16P,Bi
Standard①
720x1080,12P,Bi
High Speed
720x720,10P,Bi
Draft
720x720,8P,Bi
CJV150-107
CJV150-75 2,4
3,1
4,3
5,4
6,2
12,5
20,7
2,8
3,6
5,0
6,2
7,4
14,3
23,3
0 5 10 15 20 25
Super Smooth
720x1440,18P,Bi
High Quality
720x1080,14P,Bi
Standard②
720x720,10P,Bi
Standard①
720x720,8P,Bi
High Speed
540x720,8P,Bi
Draft
540x360,4P,Bi
Super Draft
360x360,2P,Bi
CJV150-107
CJV150-75
Print speed, SS21, 6C/8C ink set
•Ink set: -6C (CMYKLcLm+WW/WSi) or (CMYKOrLk+WW/WSi)
-8C (CMYKLcLmLkOr)
10
PVC Banner
m²/h
m²/h
* MAPS works with “Quality priority” setting in RasterLink6
** MAPS does not work
**
**
**
*
*
*
Autres manuels pour CJV150-75
2
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels MIMAKI Imprimante
MIMAKI
MIMAKI Tx400-1800B series Manuel utilisateur
MIMAKI
MIMAKI TS34-1800A Manuel utilisateur
MIMAKI
MIMAKI JFX500-2131 Manuel utilisateur
MIMAKI
MIMAKI JV400-LX Manuel utilisateur
MIMAKI
MIMAKI JV330 Series Manuel utilisateur
MIMAKI
MIMAKI UJF-605RII Manuel utilisateur
MIMAKI
MIMAKI JV33 Series Manuel utilisateur
MIMAKI
MIMAKI CJV300-130 Manuel utilisateur
MIMAKI
MIMAKI CJV Series Manuel utilisateur
MIMAKI
MIMAKI JFX500-2131 Manuel utilisateur
MIMAKI
MIMAKI jv34 series Manuel d'installation et d'exploitation
MIMAKI
MIMAKI UJF-3042FX Manuel utilisateur
MIMAKI
MIMAKI CJV150 series Manuel technique
MIMAKI
MIMAKI TS300P-1800 Manuel utilisateur
MIMAKI
MIMAKI TS34-1800A Manuel utilisateur
MIMAKI
MIMAKI JV33-130 Manuel utilisateur
MIMAKI
MIMAKI TS500-1800 Manuel utilisateur
MIMAKI
MIMAKI JFX500-2131 Instructions d'installation
MIMAKI
MIMAKI JV400-130LX Manuel utilisateur
MIMAKI
MIMAKI SWJ-320 S2 Manuel utilisateur
